Large-scale programmable assembly of functional micro-components for advanced electronics via light-regulated adhesion and polymer growth
Source abstract
Abstract
Abstract Large-area, programmable assembly of diverse micro-objects onto arbitrary substrates is a fundamental yet challenging task. Herein a simple wafer-level micro-assembly technique based on the light-triggered change in both surface topography and interfacial adhesion of a soft photo-sensitive polymer is proposed. In particular, the light-regulated polymer growth creates locally indented and elevated zones on the stamp surface. The light-mediated adhesion reduction, on the other hand, facilitates the inks to be released from the polymer. The interplay of these two effects makes it feasible for the programmable assembly of ultra-small components onto various substrates coated with supplementary adhesive layers. The fidelity of this technique is validated by assembling diverse materials and functional devices, with the printing size up to 4-inch. This work provides a rational strategy for large-scale and programmable assembly of diverse delicate micro-objects, bypassing the common issues of some existing techniques such as poor transfer uniformity, small printing area, and high cost.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Modular Robots and Swarm Intelligence · Advanced Sensor and Energy Harvesting Materials · Advanced Materials and Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Meitl, M. A. et al. Transfer printing by kinetic control of adhesion to an elastomeric stamp. Nat. Mat. 5, 33–38 (2005).10.1038/nmat1532 ↗
2. Park, S. I. et al. Printed assemblies of inorganic light-emitting diodes for deformable and semitransparent displays. Science 325, 977–981 (2009).10.1126/science.1175690 ↗
3. Kim, S. et al. Microstructured elastomeric surfaces with reversible adhesion and examples of their use in deterministic assembly by transfer printing. Proc. Natl Acad. Sci. USA 107, 17095–17100 (2010).10.1073/pnas.1005828107 ↗
4. Knuesel, R. J. & Jacobs, H. O. Self-assembly of microscopic chiplets at a liquid-liquid-solid interface forming a flexible segmented monocrystalline solar cell. Proc. Natl Acad. Sci. USA 107, 993–998 (2010).10.1073/pnas.0909482107 ↗
5. Luo, H. et al. Laser-driven programmable non-contact transfer printing of objects onto arbitrary receivers via an active elastomeric micro-structured stamp. Natl Sci. Rev. 2, 296–304 (2019).
6. Heo, S. et al. Instant, multiscale dry transfer printing by atomic diffusion control at heterogeneous interfaces. Sci. Adv. 7, eabh0040 (2021).10.1126/sciadv.abh0040 ↗
7. Pan, Z. et al. Wafer‐scale micro‐LEDs transferred onto an adhesive film for planar and flexible displays. Adv. Mater. Technol. 5, 2000549 (2020).10.1002/admt.202000549 ↗
8. Miller, R., Marinov, V., Swenson, O., Zhigang, C. & Semler, M. Noncontact selective laser-assisted placement of thinned semiconductor dice. IEEE Trans. Compon. Packag. Manuf. Technol. 2, 971–978 (2012).10.1109/TCPMT.2012.2183594 ↗
9. Kum, H. et al. Epitaxial growth and layer-transfer techniques for heterogeneous integration of materials for electronic and photonic devices. Nat. Electron. 2, 439–450 (2019).10.1038/s41928-019-0314-2 ↗
10. Jacobs, H. O., Tao, A. R., Schwartz, A., Gracias, D. H. & Whitesides, G. M. Fabrication of a cylindrical display by patterned assembly. Science 296, 323 (2002).10.1126/science.1069153 ↗
11. Zheng, W., Buhlmann, P. & Jacobs, H. O. Sequential shape-and-solder-directed self-assembly of functional microsystems. Proc. Natl Acad. Sci. USA 101, 12814–12817 (2004).10.1073/pnas.0404437101 ↗
12. Yi, H. et al. Wet-responsive, reconfigurable, and biocompatible hydrogel adhesive films for transfer printing of nanomembranes. Adv. Funct. Mater. 28, 1706498 (2018).10.1002/adfm.201706498 ↗
13. Chung, J., Zheng, W., Hatch, T. J. & Jacobs, H. O. Programmable reconfigurable self-assembly: parallel heterogeneous integration of chip-scale components on planar and nonplanar surfaces. J. Microelectromech. Syst. 15, 457–464 (2006).10.1109/JMEMS.2006.872226 ↗
14. Carlson, A. et al. Active, programmable elastomeric surfaces with tunable adhesion for deterministic assembly by transfer printing. Adv. Funct. Mater. 22, 4476–4484 (2012).10.1002/adfm.201201023 ↗
15. Carlson, A., Bowen, A. M., Huang, Y., Nuzzo, R. G. & Rogers, J. A. Transfer printing techniques for materials assembly and micro/nanodevice fabrication. Adv. Mater. 24, 5284–5318 (2012).10.1002/adma.201201386 ↗
16. Trindade, A. J. et al. Nanoscale-accuracy transfer printing of ultra-thin AlInGaN light-emitting diodes onto mechanically flexible substrates. Appl. Phys. Lett. 103, 253302 (2013).10.1063/1.4851875 ↗
17. Jeong, J. W. et al. High-resolution nanotransfer printing applicable to diverse surfaces via interface-targeted adhesion switching. Nat. Commun. 5, 5387 (2014).10.1038/ncomms6387 ↗
18. Onoe, H., Iwase, E., Matsumoto, K. & Shimoyama, I. Three-dimensional integration of heterogeneous silicon micro-structures by liftoff and stamping transfer. J. Micromech. Microeng. 17, 1818–1827 (2007).10.1088/0960-1317/17/9/010 ↗
19. Sim, K. et al. Three-dimensional curvy electronics created using conformal additive stamp printing. Nat. Electron. 2, 471–479 (2019).10.1038/s41928-019-0304-4 ↗
20. Wang, C. et al. Programmable and scalable transfer printing with high reliability and efficiency for flexible inorganic electronics. Sci. Adv. 6, eabb2393 (2020).10.1126/sciadv.abb2393 ↗
21. Zumeit, A., Dahiya, A. S., Christou, A., Shakthivel, D. & Dahiya, R. Direct roll transfer printed silicon nanoribbon arrays based high-performance flexible electronics. npj Flex. Electron. 5, 18 (2021).10.1038/s41528-021-00116-w ↗
22. Bower, C. A. et al. Emissive displays with transfer-printed assemblies of 8 μm × 15 μm inorganic light-emitting diodes. Photonics Res. 5, A23 (2017).10.1364/PRJ.5.000A23 ↗
23. Choi, M. K. et al. Wearable red-green-blue quantum dot light-emitting diode array using high-resolution intaglio transfer printing. Nat. Commun. 6, 7149 (2015).10.1038/ncomms8149 ↗
24. Meng, W. et al. Three-dimensional monolithic micro-LED display driven by atomically thin transistor matrix. Nat. Nanotechnol. 16, 1231–1236 (2021).10.1038/s41565-021-00966-5 ↗
25. Lee, K. J. et al. A printable form of single-crystalline gallium nitride for flexible optoelectronic systems. Small 1, 1164–1168 (2005).10.1002/smll.200500166 ↗
26. Lee, K. J. et al. Large-area, selective transfer of microstructured silicon: a printing- based approach to high-performance thin-film transistors supported on flexible substrates. Adv. Mater. 17, 2332–2336 (2005).10.1002/adma.200500578 ↗
27. Ahn, J. H. et al. Heterogeneous three-dimensional electronics by use of printed semiconductor nanomaterials. Science 314, 1754–1757 (2006).10.1126/science.1132394 ↗
28. Kim, D. H. et al. Dissolvable films of silk fibroin for ultrathin conformal bio-integrated electronics. Nat. Mater. 9, 511–517 (2010).10.1038/nmat2745 ↗
29. Kim, R. H. et al. Waterproof AlInGaP optoelectronics on stretchable substrates with applications in biomedicine and robotics. Nat. Mater. 9, 929–937 (2010).10.1038/nmat2879 ↗
30. Ko, H. C. et al. A hemispherical electronic eye camera based on compressible silicon optoelectronics. Nature 454, 748–753 (2008).10.1038/nature07113 ↗
31. Jang, K. I. et al. Self-assembled three dimensional network designs for soft electronics. Nat. Commun. 8, 15894 (2017).10.1038/ncomms15894 ↗
32. Huang, Z. et al. Three-dimensional integrated stretchable electronics. Nat. Electron. 1, 473–480 (2018).10.1038/s41928-018-0116-y ↗
33. Park, J. K., Zhang, Y., Xu, B. & Kim, S. Pattern transfer of large-scale thin membranes with controllable self-delamination interface for integrated functional systems. Nat. Commun. 12, 6882 (2021).10.1038/s41467-021-27208-5 ↗
34. Jiang, H. X., Jin, S. X., Li, J., Shakya, J. & Lin, J. Y. III-nitride blue microdisplays. Appl. Phys. Lett. 78, 1303–1305 (2001).10.1063/1.1351521 ↗
35. Choi, H. W., Jeon, C. W. & Dawson, M. D. High-resolution 128X96 nitride microdisplay. IEEE Electron Device Lett. 25, 277–279 (2004).10.1109/LED.2004.826541 ↗
36. Lu, Z., Chen, P. C. Y. & Lin, W. Force sensing and control in micromanipulation. IEEE Trans. Syst. Man Cybern. PC, Appl. Rev. 36, 713–724 (2006).10.1109/TSMCC.2006.879385 ↗
37. Tormen, M., Borzenko, T., Steffen, B., Schmidt, G. & Molenkamp, L. W. Using ultrathin elastomeric stamps to reduce pattern distortion in microcontact printing. Appl. Phys. Lett. 81, 2094–2096 (2002).10.1063/1.1505747 ↗
38. Perl, A., Reinhoudt, D. N. & Huskens, J. Microcontact printing: limitations and achievements. Adv. Mater. 21, 2257–2268 (2009).10.1002/adma.200801864 ↗
39. Kim, S. & Sitti, M. Biologically inspired polymer microfibers with spatulate tips as repeatable fibrillar adhesives. Appl. Phys. Lett. 89, 261911 (2006).10.1063/1.2424442 ↗
40. Sameoto, D. & Menon, C. A low-cost, high-yield fabrication method for producing optimized biomimetic dry adhesives. J. Micromech. Microeng. 19, 115002 (2009).10.1088/0960-1317/19/11/115002 ↗
41. Marinov, V. R. 52-4: Laser-enabled extremely-high rate technology for µLED assembly. Dig. Tech. Pap. - SID Int. Symp. 49, 692–695 (2018).10.1002/sdtp.12352 ↗
42. McPhillimy, J. et al. Automated nanoscale absolute accuracy alignment system for transfer printing. ACS Appl. Nano Mater. 3, 10326–10332 (2020).10.1021/acsanm.0c02224 ↗
43. Sim, K., Rao, Z., Li, Y., Yang, D. & Yu, C. Curvy surface conformal ultra-thin transfer printed Si optoelectronic penetrating microprobe arrays. npj Flex. Electron. 2, 2 (2018).10.1038/s41528-017-0015-8 ↗
44. Rao, Z. et al. Curvy, shape-adaptive imagers based on printed optoelectronic pixels with a kirigami design. Nat. Electron. 4, 513–521 (2021).10.1038/s41928-021-00600-1 ↗
45. Park, J. et al. Soft, smart contact lenses with integrations of wireless circuits, glucose sensors, and displays. Sci. Adv. 4, eaap9841 (2018).10.1126/sciadv.aap9841 ↗
46. Mohammadi Nasab, A., Luo, A., Sharifi, S., Turner, K. T. & Shan, W. Switchable adhesion via subsurface pressure modulation. ACS Appl. Mater. Interfaces 12, 27717–27725 (2020).10.1021/acsami.0c05367 ↗
47. Chopra, V., Chudak, M., Hensel, R., Darhuber, A. A. & Arzt, E. Enhancing dry adhesion of polymeric micropatterns by electric fields. ACS Appl. Mater. Interfaces 12, 27708–27716 (2020).10.1021/acsami.0c05077 ↗
48. Kim, S. et al. Soft nanocomposite electroadhesives for digital micro- and nanotransfer printing. Sci. Adv. 5, eaax4790 (2019).10.1126/sciadv.aax4790 ↗
49. Zhou, Y. et al. Light-switchable polymer adhesive based on photoinduced reversible solid-to-liquid transitions. ACS Macro Lett. 8, 968–972 (2019).10.1021/acsmacrolett.9b00459 ↗
50. Feng, W., Chu, L., de Rooij, M. B., Liu, D. & Broer, D. J. Photoswitching between water-tolerant adhesion and swift release by inverting liquid crystal fingerprint topography. Adv. Sci. 8, 2004051 (2021).10.1002/advs.202004051 ↗
51. Hohl, D. K. & Weder, C. Debonding on demand with optically switchable adhesives. Adv. Opt. Mater. 7, 1900230 (2019).10.1002/adom.201900230 ↗
52. Sánchez, C. et al. Photoembossing of periodic relief structures using polymerization- induced diffusion: a combinatorial study. Adv. Mater. 17, 2567–2571 (2005).10.1002/adma.200500777 ↗
53. Leewis, C. M., de Jong, A. M., van Ijzendoorn, L. J. & Broer, D. J. Reaction–diffusion model for the preparation of polymer gratings by patterned ultraviolet illumination. J. Appl. Phys. 95, 4125–4139 (2004).10.1063/1.1688458 ↗
54. Kim, H. S. et al. Unusual strategies for using indium gallium nitride grown on silicon (111) for solid-state lighting. Proc. Natl Acad. Sci. USA 108, 10072–10077 (2011).10.1073/pnas.1102650108 ↗
55. Fu, W. Y. & Choi, H. W. Explaining relative spectral red shifts in InGaN/GaN micropillars. Optica 5, 765–773 (2018).10.1364/OPTICA.5.000765 ↗
56. Gong, Z. et al. Size-dependent light output, spectral shift, and self-heating of 400 nm InGaN light-emitting diodes. J. Appl. Phys. 107, 013103 (2010).10.1063/1.3276156 ↗
57. Li, L. et al. Heterogeneous integration of microscale GaN light-emitting diodes and their electrical, optical, and thermal characteristics on flexible substrates. Adv. Mater. Technol. 3, 1700239 (2018).10.1002/admt.201700239 ↗
58. Zhang, J. et al. High-performance acetone soluble tape transfer printing method for heterogeneous integration. Sci. Rep. 9, 15769 (2019).10.1038/s41598-019-52235-0 ↗