journal article·2016-05

Transversely isotropic hyperelastic-viscoplastic model for glassy polymers with application to additive manufactured photopolymers

Pu Zhang, Albert C. To

Publisher page

Abstract

Abstract A typical feature of additive manufactured photopolymers is that their mechanical behavior depends on the printing direction. Hence, this work aims at developing a material model to predict the inelastic deformation and failure of glassy polymers with such an effect. To achieve this goal, a transversely isotropic hyperelastic-viscoplastic model is proposed, which considers the effects of strain rate, pressure, temperature, and printing direction. In addition, a modified Tsai-Wu failure criterion is proposed to predict the macroscopic failure of glassy polymers with strain softening. The proposed model is applied to simulate the deformation and failure of additive manufactured lattice structures. Experimental and simulation results indicate that the mechanical behavior of additive manufactured lattice structures depends on not only the lattice orientation but also the printing direction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Cellular and Composite Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Modeling of deformation behavior and strain-induced crystallization in poly (ethylene terephthalate) above the glass transition temperature10.1016/S0167-6636(03)00004-8 ↗
2. A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part I: Formulation10.1016/j.ijplas.2008.11.004 ↗
3. A theory of amorphous solids undergoing large deformations, with application to polymeric glasses10.1016/S0020-7683(02)00651-0 ↗
4. A theory for the low-temperature plastic deformation of glassy polymers10.1080/14786437308220987 ↗
5. Evolution of plastic anisotropy in amorphous polymers during finite straining10.1016/0749-6419(93)90034-N ↗
6. A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials10.1016/0022-5096(93)90013-6 ↗
7. Effects of strain rate, temperature and thermomechanical coupling on the finite strain deformation of glassy polymers10.1016/0167-6636(94)00034-E ↗
8. Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: experiments and constitutive modelling10.1016/j.ijplas.2010.07.005 ↗
9. Modelling large deformation behaviour under loading–unloading of semicrystalline polymers: application to a high density polyethylene10.1016/j.ijplas.2009.07.005 ↗
10. Bazaraa · 2013
11. Modelling of photodegradation effect on elastic–viscoplastic behaviour of amorphous polylactic acid films10.1016/j.jmps.2009.10.003 ↗
12. Bendsøe · 2003
13. Constitutive modeling of the large strain time-dependent behavior of elastomers10.1016/S0022-5096(97)00075-6 ↗
14. Nonisotropic experimental characterization of the relaxation modulus for PolyJet manufactured parts10.1557/jmr.2014.200 ↗
15. Constitutive model for the finite deformation stress–strain behavior of poly (ethylene terephthalate) above the glass transition10.1016/S0032-3861(99)00406-1 ↗
16. The large strain compression, tension, and simple shear of polycarbonate10.1002/pen.760340904 ↗
17. Large inelastic deformation of glassy polymers. Part I: rate dependent constitutive model10.1016/0167-6636(88)90003-8 ↗
18. On the kinematics of finite strain plasticity10.1016/0022-5096(89)90033-1 ↗
19. Damage based constitutive relationships in semi-crystalline polymer by using multi-mechanisms model10.1016/j.ijplas.2013.06.008 ↗
20. PolyJet technology for product prototyping: tensile strength and surface roughness properties10.1177/0954405413518515 ↗
21. Hyperelastic energy densities for soft biological tissues: a review
22. Christensen · 2013
23. Modeling deformation behavior of polymers with viscoplasticity theory based on overstress10.1016/j.ijplas.2004.04.004 ↗
24. 3D-printing of lightweight cellular composites10.1002/adma.201401804 ↗
25. The plastic spin10.1115/1.3169160 ↗
26. The effect of plastic spin on anisotropic material behavior10.1016/0749-6419(89)90014-4 ↗
27. Analysis of the mechanical response of biomimetic materials with highly oriented microstructures through 3D printing, mechanical testing and modeling10.1016/j.jmbbm.2015.03.026 ↗
28. Tough composites inspired by mineralized natural materials: computation, 3D printing, and testing10.1002/adfm.201300215 ↗
29. Thermo-viscoelastic and viscoplastic behavior of high-density polyethylene10.1016/j.ijsolstr.2008.03.008 ↗
30. Constitutive equations in finite viscoplasticity of semicrystalline polymers10.1016/S0020-7683(03)00414-1 ↗
31. Constitutive modeling of the finite strain behavior of amorphous polymers in and above the glass transition10.1016/j.mechmat.2006.02.006 ↗
32. Modelling effects of degree of crystallinity on mechanical behavior of semicrystalline polymers10.1016/j.ijplas.2007.09.003 ↗
33. A failure criterion for composite materials10.1177/002199839102500104 ↗
34. On stress-state dependent plasticity modeling: significance of the hydrostatic stress, the third invariant of stress deviator and the non-associated flow rule10.1016/j.ijplas.2010.05.004 ↗
35. Tensile fracture of welded polymer interfaces: miscibility, entanglements, and crazing10.1021/ma501473q ↗
36. Molecular dynamics simulations of polymer welding: strength from interfacial entanglements10.1103/PhysRevLett.110.098301 ↗
37. Gibson · 1999
38. Failure criteria for unidirectional fiber composites10.1115/1.3153664 ↗
39. A theory of the yielding and plastic flow of anisotropic metals10.1098/rspa.1948.0045 ↗
40. Holzapfel · 2000
41. Comment on the use of the associated flow rule for transversely isotropic elasto-viscoplastic materials10.1016/j.ijplas.2013.06.001 ↗
42. Complex ordered patterns in mechanical instability induced geometrically frustrated triangular cellular structures10.1103/PhysRevLett.112.098701 ↗
43. Kocks · 1975
44. A thermodynamically-based constitutive model for thermoplastic polymers coupling viscoelasticity, viscoplasticity and ductile damage10.1016/j.ijplas.2014.04.010 ↗
45. Elastic-plastic deformation at finite strains10.1115/1.3564580 ↗
46. A two-phase self-consistent model for the deformation and phase transformation behavior of polymers above the glass transition temperature: application to PET10.1016/j.ijplas.2004.04.012 ↗
47. Strong, lightweight, and recoverable three-dimensional ceramic nanolattices10.1126/science.1255908 ↗
48. Finite viscoplasticity of amorphous glassy polymers in the logarithmic strain space10.1016/j.ijsolstr.2008.08.029 ↗
49. Mechanics of the rate-dependent elastic–plastic deformation of glassy polymers from low to high strain rates10.1016/j.ijsolstr.2005.04.016 ↗
50. Certain basic issues in finite-deformation continuum plasticity10.1007/BF01559684 ↗
51. Nemat-Nasser · 2004
52. Nonlinear elasticity, anisotropy, material stability and residual stresses in soft tissue
53. Representation of inelastic behaviour in the presence of anisotropy and of finite deformations
54. Parks · 1984
55. Formulation and implementation of a constitutive model for semicrystalline polymers10.1016/j.ijplas.2014.05.010 ↗
56. Finite deformation thermo-mechanical behavior of thermally induced shape memory polymers10.1016/j.jmps.2007.12.002 ↗
57. Multi-mechanism models for semi-crystalline polymer: constitutive relations and finite element implementation10.1016/j.ijplas.2008.09.010 ↗
58. Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates10.1016/j.ijsolstr.2007.05.018 ↗
59. On the dual variable of the logarithmic strain tensor, the dual variable of the Cauchy stress tensor, and related issues10.1016/S0020-7683(01)00073-7 ↗
60. Theory of invariants
61. A thermo-mechanically-coupled large-deformation theory for amorphous polymers in a temperature range which spans their glass transition10.1016/j.ijplas.2010.01.004 ↗
62. Investigations into the origins of plastic flow and strain hardening in amorphous glassy polymers10.1016/j.ijplas.2013.11.007 ↗
63. Prediction of deformation behavior of glassy polymers based on molecular chain network model10.1016/0020-7683(94)00315-N ↗
64. A general theory of strength for anisotropic materials10.1177/002199837100500106 ↗
65. Micro-, meso-to macroscopic modeling of deformation behavior of semi-crystalline polymer10.1016/j.ijplas.2013.03.007 ↗
66. Constitutive equations for thermomechanical deformations of glassy polymers10.1016/j.ijsolstr.2009.08.006 ↗
67. Modeling the inelastic deformation and fracture of polymer composites–Part I: plasticity model10.1016/j.mechmat.2012.12.002 ↗
68. Review of the energy limiters approach to modeling failure of rubber10.5254/rct.13.87948 ↗
69. Co-continuous composite materials for stiffness, strength, and energy dissipation10.1002/adma.201003956 ↗
70. Finite deformation constitutive equations and a time integration procedure for isotropic, hyperelastic-viscoplastic solids10.1016/0045-7825(90)90131-5 ↗
71. On improved network models for rubber elasticity and their applications to orientation hardening in glassy polymers10.1016/0022-5096(93)90043-F ↗
72. Coarse-grained molecular dynamics simulations of the tensile behavior of a thermosetting polymer10.1103/PhysRevE.90.012601 ↗
73. Modelling of the elasto-viscoplastic damage behaviour of glassy polymers10.1016/j.ijplas.2007.08.001 ↗
74. Biomimetic staggered composites with highly enhanced energy dissipation: modeling, 3D printing, and testing10.1016/j.jmps.2015.06.015 ↗
75. Point group symmetry and deformation-induced symmetry breaking of superlattice materials10.1098/rspa.2015.0125 ↗
76. Efficient design-optimization of variable-density hexagonal cellular structure by additive manufacturing: theory and validation10.1115/1.4028724 ↗
77. Bioinspired engineering of honeycomb structure–Using nature to inspire human innovation10.1016/j.pmatsci.2015.05.001 ↗
78. Ultralight, ultrastiff mechanical metamaterials10.1126/science.1252291 ↗