The impact of zeolite filler on ageing and mechanical failure of paper
Source abstract
Abstract
Abstract The choice of the filler type for paper materials has been a qualitative discussion. The mineral precipitated calcium carbonate (PCC) is used in considerable quantities in the pulp and paper industry as filler. However, alternative filler materials have been researched for improving the properties of paper. In this work, a domestic zeolite (clinoptilolite) filler was used separately and mixed with precipitated calcium carbonate (PCC) fillers. Indeed, the objective of our approach was to explore the structural and mechanical properties of handsheets having filler content affected as a function of accelerated ageing. The results confirmed that the mixed furnish of zeolite and PCC fillers provides positive and synergistic effect on the mechanical properties of ageing handsheets at the low content.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Advanced Cellulose Research Studies · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Izmir Katip Celebi University , Faculty of Forestry , Cigli , Izmir , Turkey
Istanbul University , Faculty of Forestry , Bahcekoy , Istanbul , Turkey
Funding
Bilimsel Araştirma Projeleri Birimi, Istanbul Üniversitesi
References (40)
Show source-provided references
1. Arney, J.S., Novak, C.L. (1982) Accelerated Ageing of Paper: The influence of acidity on the relative contribution of oxygen-independent and oxygen-dependent process. Tappi J. 65(3):113–115.
2. Atik, C., İmamoğlu, S., Valchev, I. (2005) Determination of specific beating energy-applied on certain pulps in a valley beater, J. Univ. Chem. Technol. Metall. 40(3):199–202.
3. Barrow, J.W. Permanence/Durability of the Book, a Two-Year Research Program. W.J. Barrow Res. Lab., Richmond, VA, 1963, (Pub. no. 1).
4. Brouillette, F., Chabot, B., Morneau, D., Daneault, C. (2004) Effect of physic-chemical conditions on the properties of zeolite microparticles used in pulp and paper applications. Microporous Mesoporous Mater. 70(1–3):51–56.10.1016/j.micromeso.2004.03.001 ↗
5. Campbell, W.B. (1959) The mechanism of bonding. Tappi J. 42(12):999–1001.
6. Clark, F.C. (1937) Report of the Permanence and Durability Committee of the Technical Association of the Pulp and Paper Industry. Technology Association Papers 20:296.
7. Clark, J. (1962) Factors contributing Effects of fiber coarseness and length, I. Bulk, burst, tears, fold and tensile tests. Tappi J. 45:628–634.
8. Cox, H.L. (1952) The elasticity and strength of paper and other fibrous materials. Br. J. Appl. Phys. 3(3):72–90.10.1088/0508-3443/3/3/302 ↗
9. Diana, G.S., Mirela, R., Tadeja, M., Branka, L. (2012) Natural zeolite as filler in base ink jet paper sheet. Nord. Pulp Pap. 27(4):721–728.10.3183/npprj-2012-27-04-p721-728 ↗
10. Engin, M. (2017) An investigation into to the tensile behaviour of self-bonded cellulosic fibre networks. PhD thesis, The University of Manchester, School of Materials.
11. Evans, R., Wallis, A.F. (1989) Cellulose molecular weights determined by viscometry. J. Appl. Polym. Sci. 37(8):2331–2340.10.1002/app.1989.070370822 ↗
12. Feller, L.R., Lee, B.S., Curran, M. (1985) Three fundamental aspects of cellulose deterioration. Art Archaeol. Tech. Abstr. 22(1):278–354.
13. Fellers, C., Iversen, T., Lindström, T., Nilsson, T., Rigdal, M. (1989) Ageing/Degradation of Paper, A literature survey. Report no. 1E:47.
14. Graminski, E.L., Parks, E.J., Toth, E.E. (1979) The effects of temperature and moisture on the accelerated ageing of paper. In: Durability of macromolecular materials. ACS Symp. Ser., vol. 95. pp. 341–355.10.1021/bk-1979-0095.ch024 ↗
15. I’Anson, S.J., Sampson, W.W., Sevajee, C.R. (2007) New perspectives on the influence of formation and grammage on sheet strength. In: Annual Meeting – Pulp and Paper Technical Association of Canada, 93rd. pp. 141–144.
16. Ingmanson, W.L., Thode, E.F. (1959) Factors contributing to the strength of a sheet of paper. II. Relative bonded area. Tappi J. 42(1):83–93.
17. Kerekes, R.J., Schell, C.J. (1995) Effects of fiber length and coarseness on pulp flocculation. Tappi J. 78(2):133–139.
18. Korteoja, M.J., Lukkarinen, A., Kaski, K., Niskanen, K.J. (1997) Computational study of formation effects on paper strength. Pulp Pap. Sci. 23(1):18–22.
19. Laufmann, M., Forsblom, M., Strutz, M.D., Yeakey, S.R. (2000) GCC vs. PCC as the primary filler for uncoated and coated wood free paper. Tappi J. 83(5):76.
20. Luner, P. (1969) Paper permanence. Tappi J. 52(5):796–805.
21. Millet, A.M., Western, L.J., Booth, J.J. (1967) Accelerated ageing of cellulosic materials: design and application of a heating chamber. Tappi J. 50(11):74A–80A.
22. Mumpton, A.F. (1999) La roca magica: uses of natural zeolites in agriculture and industry. Proc. Natl. Acad. Sci. 96(7):3463–3470.10.1073/pnas.96.7.3463 ↗
23. Neimo, L. (1964) Accelerated Heat Ageing of Cellulose. Pap. Puu 46(1):7–14.
24. Niskanen, K. (1998) Paper physics. Tappi Press. Book 16.
25. Nordstrom, B. (2006) Twin-wire roll forming of mechanical base paper from three furnishes-effects on formation and mechanical properties. Nord. Pulp Pap. 21(3):349–358.10.3183/npprj-2006-21-03-p349-358 ↗
26. Pang, P., Khoultchaev, K.K., Englezos, P. (1998) Inhibition of the dissolution of papermaking grade precipitated calcium carbonate filler. Tappi J. 81(4):188–192.
27. Paulapuro, H. (2000) Paper and board grades. Tappi Press. Book 18.
28. Richter, A.G., Wells, L.F. (1956) Influence of moisture in accelerated ageing of cellulose. Tappi J. 39(8):603–608.
29. Robertson, D.D. (1976) The evaluation of paper permanence and durability. Tappi J. 59(12):63–69.
30. Royen, A.H. (1957) Artificial ageing at 100 °C compared with natural ageing at room temperature. Assoc. Tech. Ind. Pap. Bull. 6:223–226.
31. Sain, M., Diamond, M., Danealt, C. (2001) Novel zeolites fillers for fresh water reduction in papermaking: Effect on graded paper properties. In: Proc. TAPPI Papermakers Conf. Tappi Press. pp. 1109–1117.
32. Seth, R.S., Page, D.H. (1981) The stress strain curve of paper. In: The Role of Fundamental Research in Paper Making Trans. VIIth Fund. Res. Symp. Ed. Brander, J. pp. 421–452.10.15376/frc.1981.1.421 ↗
33. Setterholm, V., Kuenzi, E.W. (1970) Fibre orientation and degree of restraint during drying effect on tensile anisotropy of paper handsheets. Tappi J. 53(10):1915–1920.
34. Shen, J., Song, Z., Qian, X., Liu, W. (2009) Modification of papermaking grade fillers: A brief review. BioResources 4(3):1190–1209.10.15376/biores.4.3.1190-1209 ↗
35. Shen, J., Song, Z., Qian, X., Yang, F. (2010) Carboxymethyl cellulose/alum modified precipitated calcium carbonate fillers: Preparation and their use in papermaking. Carbohydr. Polym. 81(3):545–553.10.1016/j.carbpol.2010.03.012 ↗
36. Smook, G., Peel, D.J. Paper science and paper manufacture. Angus Wilde Publication, 1999.
37. Wilson, W.K., Harvey, J.L., Mandel, J., Worksman, T. (1955) Accelerated Ageing of Record Papers Compared with Normal Ageing. Tappi J. 38(9):543–548.
38. Wilson, K.W., Parks, J.E. (1983) Historical survey of research at the National Bureau of Standards on materials for archival records. Restaurator 5(3–4):191–241.10.1515/rest.1983.5.3-4.191 ↗
39. Zervos, S. (2010) Natural and accelerated ageing of cellulose and paper: a literature review. In: Cellulose: Structure and Properties, Derivatives and Industrial Uses. Eds. Lejeune, A., Deprez, T. Nova Science Publishers. pp. 155–203. Chapter 5.
40. Zou, X., Gurnagul, N., Uesaka, T., Bouchard, J. (1994) Accelerated ageing of papers of pure cellulose: mechanism of cellulose degradation and paper embrittlement. Polym. Degrad. Stab. 43(3):393–402.10.1016/0141-3910(94)90011-6 ↗