Paperboard as a substrate for biocompatible slippery liquid-infused porous surfaces
Source abstract
Abstract
Abstract Slippery liquid-infused porous surfaces or SLIPS were first introduced in 2011 by Wong et al. who reported a bioinspired self-repairing surface with remarkable slippery properties. Generally, production of these surfaces includes fossil-based or expensive materials and processes that are available mainly in laboratory scale. In this study, slippery surfaces with sliding angles of less than 10° are obtained using fibre-based material – paperboard – that is commercially available in large-scale and also cheap compared to substrates generally used in this field. The hierarchical nanostructure that is a necessary condition for appropriate droplet mobility was obtained by the liquid flame spray method. This method is fast, scalable, has a variety of optimization parameters and can be utilized in roll-to-roll technology that is traditional in paper industry. In this work, paperboard serves not only as a substrate, but also as a reservoir for the lubricant, thus it is important to evaluate the affinity of the material for the oils and estimate the capillary movement. Therefore, Cobb and Klemm methods were used when choosing a paperboard material. In addition to synthetic oils, rapeseed oil was also utilized as a lubricant, which potentially leads to eco-friendly and recyclable slippery liquid-infused porous surfaces.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Electrohydrodynamics and Fluid Dynamics · Pickering emulsions and particle stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
7840 Tampere University , Paper Converting and Packaging Technology, Faculty of Engineering and Natural Sciences , P. O. Box 589 , , Tampere , Finland
7840 Tampere University , Physics, Faculty of Engineering and Natural Sciences , P. O. Box 692 , , Tampere , Finland
Funding
H2020 Marie Skłodowska-Curie Actions
References (41)
Show source-provided references
1. Anand, S., Paxson, A.T., Dhiman, R., Smith, J.D., Varanasi, K.K. (2012) Enhanced condensation on lubricant-impregnated nanotextured surfaces. ACS Nano 6(11):10122–10129.10.1021/nn303867y ↗
2. Aromaa, M., Arffman, A., Suhonen, H., Haapanen, J., Keskinen, J., Honkanen, M., Nikkanen, J.P., Levänen, E., Messing, M.E., Deppert, K., Teisala, H., Tuominen, M., Kuusipalo, J., Stepien, M., Saarinen, J.J., Toivakka, M., Mäkelä, J.M. (2012a) Atmospheric synthesis of superhydrophobic TiO2{\mathrm{TiO}2} nanoparticle deposits in a single step using Liquid Flame Spray. J. Aerosol Sci. 52:57–68.10.1016/j.jaerosci.2012.04.009 ↗
3. Aromaa, M., Haapanen, J., Teisala, H., Tuominen, M., Kuusipalo, J., Stepien, M., Saarinen, J.J., Toivakka, M., Mäkelä, J.M. (2012b) Flame deposition of superhydrophobic and superhydrophilic nanoparticle coating on paperboard materials. TechConnect Briefs 1:365–367.
4. Artus, G.R.J., Jung, S., Zimmermann, J., Gautschi, H.P., Marquardt, K., Seeger, S. (2006) Silicone nanofilaments and their application as superhydrophobic coatings. Adv. Mater. 18(20):2758–2762.10.1002/adma.200502030 ↗
5. Brobbey, K.J., Haapanen, J., Gunell, M., Mäkelä, J.M., Eerola, E., Toivakka, M., Saarinen, J.J. (2017) One-step flame synthesis of silver nanoparticles for roll-to-roll production of antibacterial paper. Appl. Surf. Sci. 420:558–565.10.1016/j.apsusc.2017.05.143 ↗
6. Chen, J., Dou, R., Cui, D., Zhang, Q., Zhang, Y., Xu, F., Zhou, X., Wang, J., Song, Y., Jiang, L. (2013) Robust prototypical anti-icing coatings with a self-lubricating liquid water layer between ice and substrate. ACS Appl. Mater. Interfaces 5(10):4026–4030.10.1021/am401004t ↗
7. Daniel, D., Mankin, M.N., Belisle, R.A., Wong, T.S., Aizenberg, J. (2013) Lubricant-infused micro/nano-structured surfaces with tunable dynamic omniphobicity at high temperatures. Appl. Phys. Lett. 102(23):231603.10.1063/1.4810907 ↗
8. Epstein, A.K., Wong, T.S., Belisle, R.A., Boggs, E.M., Aizenberg, J. (2012) Liquid-infused structured surfaces with exceptional anti-biofouling performance. Proc. Natl. Acad. Sci. USA 109(33):13182–13187.10.1073/pnas.1201973109 ↗
9. Glavan, A.C., Martinez, R.V., Subramaniam, A.B., Yoon, H.J., Nunes, R.M.D., Lange, H., Thuo, M.M., Whitesides, G.M. (2014) Omniphobic “r F paper” produced by silanization of paper with fluoroalkyltrichlorosilanes. Adv. Funct. Mater. 24(1):60–70.10.1002/adfm.201300780 ↗
10. Haapanen, J., Aromaa, M., Teisala, H., Juuti, P., Tuominen, M., Sillanpaa, M., Stepien, M., Saarinen, J.J., Toivakka, M., Kuusipalo, J., Makela, J.M. (2019) On the limit of superhydrophobicity: Defining the minimum amount of TiO2 nanoparticle coating. Mater. Res. Express 6(3):35004.10.1088/2053-1591/aaf2ee ↗
11. Haapanen, J., Aromaa, M., Teisala, H., Tuominen, M., Stepien, M., Saarinen, J.J., Heikkilä, M., Toivakka, M., Kuusipalo, J., Mäkelä, J.M. (2015) Binary TiO2{\mathrm{TiO}2}/SiO2{\mathrm{SiO}2} nanoparticle coating for controlling the wetting properties of paperboard. Mater. Chem. Phys. 149:230–237.10.1016/j.matchemphys.2014.10.011 ↗
12. He, X., Qiang, W., Du, C., Shao, Q., Zhang, X., Deng, Y. (2017) Modification of lubricant infused porous surface for low-voltage reversible electrowetting. J. Mater. Chem. A 5(36):19159–19167.10.1039/C7TA05890J ↗
13. Juuti, P., Haapanen, J., Stenroos, C., Niemelä-Anttonen, H., Harra, J., Koivuluoto, H., Teisala, H., Lahti, J., Tuominen, M., Kuusipalo, J., Vuoristo, P., Mäkelä, J.M. (2017) Achieving a slippery, liquid-infused porous surface with anti-icing properties by direct deposition of flame synthesized aerosol nanoparticles on a thermally fragile substrate. Appl. Phys. Lett. 110(16):161603.10.1063/1.4981905 ↗
14. Kim, P., Kreder, M.J., Alvarenga, J., Aizenberg, J. (2013) Hierarchical or not? Effect of the length scale and hierarchy of the surface roughness on omniphobicity of lubricant-infused substrates. Nano Lett. 13(4):1793–1799.10.1021/nl4003969 ↗
15. Kim, P., Wong, T.S., Alvarenga, J., Kreder, M.J., Adorno-Martinez, W.E., Aizenberg, J. (2012) Liquid-infused nanostructured surfaces with extreme anti-ice and anti-frost performance. ACS Nano 6(8):6569–6577.10.1021/nn302310q ↗
16. Lafuma, A., Quéré, D. (2011) Slippery pre-suffused surfaces. Europhys. Lett. 96(5):56001.10.1209/0295-5075/96/56001 ↗
17. Mäkelä, J.M., Aromaa, M., Teisala, H., Tuominen, M., Stepien, M., Saarinen, J.J., Toivakka, M., Kuusipalo, J. (2011) Nanoparticle deposition from liquid flame spray onto moving roll-to-roll paperboard material. Aerosol Sci. Technol. 45(7):817–827.10.1080/02786826.2011.566292 ↗
18. Manabe, K., Nishizawa, S., Kyung, K.H., Shiratori, S. (2014) Optical phenomena and antifrosting property on biomimetics slippery fluid-infused antireflective films via layer-by-layer comparison with superhydrophobic and antireflective films. ACS Appl. Mater. Interfaces 6(16):13985–13993.10.1021/am503352x ↗
19. Manna, U., Lynn, D.M. (2015) Fabrication of liquid-infused surfaces using reactive polymer multilayers: Principles for manipulating the behaviors and mobilities of aqueous fluids on slippery liquid interfaces. Adv. Mater. 27(19):3007–3012.10.1002/adma.201500893 ↗
20. Manna, U., Raman, N., Welsh, M.A., Zayas-Gonzalez, Y.M., Blackwell, H.E., Palecek, S.P., Lynn, D.M. (2016) Slippery liquid-infused porous surfaces that prevent microbial surface fouling and kill non-adherent pathogens in surrounding media: A controlled release approach. Adv. Funct. Mater. 26(21):3599–3611.10.1002/adfm.201505522 ↗
21. Mukherjee, R., Habibi, M., Rashed, Z.T., Berbert, O., Shi, X., Boreyko, J.B. (2018) Oil-impregnated hydrocarbon-based polymer films. Sci. Rep. 8(1):11698.10.1038/s41598-018-29823-7 ↗
22. Muschi, M., Brudieu, B., Teisseire, J., Sauret, A. (2018) Drop impact dynamics on slippery liquid-infused porous surfaces: Influence of oil thickness. Soft Matter 14(7):1100–1107.10.1039/C7SM02026K ↗
23. Niemelä-Anttonen, H., Koivuluoto, H., Tuominen, M., Teisala, H., Juuti, P., Haapanen, J., Harra, J., Stenroos, C., Lahti, J., Kuusipalo, J., Mäkelä, J.M., Vuoristo, P. (2018) Icephobicity of slippery liquid infused porous surfaces under multiple freeze–thaw and ice accretion–detachment cycles. Adv. Mater. Interfaces 5(20):1800828.10.1002/admi.201800828 ↗
24. Pokroy, B., Epstein, A.K., Persson-Gulda, M.C.M., Aizenberg, J. (2009) Fabrication of bioinspired actuated nanostructures with arbitrary geometry and stiffness. Adv. Mater. 21(4):463–469.10.1002/adma.200801432 ↗
25. Qiu, R., Zhang, Q., Wang, P., Jiang, L., Hou, J., Guo, W., Zhang, H. (2014) Fabrication of slippery liquid-infused porous surface based on carbon fiber with enhanced corrosion inhibition property. Colloids Surf. A, Physicochem. Eng. Asp. 453(1):132–141.10.1016/j.colsurfa.2014.04.035 ↗
26. Rykaczewski, K., Paxson, A.T., Staymates, M., Walker, M.L., Sun, X., Anand, S., Srinivasan, S., McKinley, G.H., Chinn, J., Scott, J.H.J., Varanasi, K.K. (2014) Dropwise condensation of low surface tension fluids on omniphobic surfaces. Sci. Rep. 4:4158.10.1038/srep04158 ↗
27. Shillingford, C., Maccallum, N., Wong, T.S., Kim, P., Aizenberg, J. (2014) Fabrics coated with lubricated nanostructures display robust omniphobicity. Nanotechnology 25(1):014019.10.1088/0957-4484/25/1/014019 ↗
28. Smith, J.D., Dhiman, R., Anand, S., Reza-Garduno, E., Cohen, R.E., McKinley, G.H., Varanasi, K.K. (2013) Droplet mobility on lubricant-impregnated surfaces. Soft Matter 9(6):1772–1780.10.1039/C2SM27032C ↗
29. Stepien, M., Chinga-Carrasco, G., Saarinen, J.J., Teisala, H., Tuominen, M., Aromaa, M., Haapanen, J., Kuusipalo, J., Mäkelä, J.M., Toivakka, M. (2013a) Wear resistance of nanoparticle coatings on paperboard. Wear 307(1–2):112–118.10.1016/j.wear.2013.08.022 ↗
30. Stepien, M., Saarinen, J.J., Teisala, H., Tuominen, M., Aromaa, M., Haapanen, J., Kuusipalo, J., Mäkelä, J.M., Toivakka, M. (2013b) ToF-SIMS analysis of UV-switchable TiO2{\mathrm{TiO}2}-nanoparticle-coated paper surface. Langmuir 29(11):3780–3790.10.1021/la304731m ↗
31. Stepien, M., Saarinen, J.J., Teisala, H., Tuominen, M., Aromaa, M., Kuusipalo, J., Mäkelä, J.M., Toivakka, M. (2011) Adjustable wettability of paperboard by liquid flame spray nanoparticle deposition. Appl. Surf. Sci. 257(6):1911–1917.10.1016/j.apsusc.2010.09.025 ↗
32. Stepien, M., Saarinen, J.J., Teisala, H., Tuominen, M., Aromaa, M., Kuusipalo, J., Mäkelä, J.M., Toivakka, M. (2012) Surface chemical analysis of photocatalytic wettability conversion of TiO2{\mathrm{TiO}2} nanoparticle coating. Surf. Coat. Technol. 208:73–79.10.1016/j.surfcoat.2012.08.008 ↗
33. Teisala, H., Tuominen, M., Aromaa, M., Mäkelä, J.M., Stepien, M., Saarinen, J.J., Toivakka, M., Kuusipalo, J. (2010) Development of superhydrophobic coating on paperboard surface using the Liquid Flame Spray. Surf. Coat. Technol. 205(2):436–445.10.1016/j.surfcoat.2010.07.003 ↗
34. Teisala, H., Tuominen, M., Aromaa, M., Stepien, M., Mäkelä, J.M., Saarinen, J.J., Toivakka, M., Kuusipalo, J. (2012) Nanostructures increase water droplet adhesion on hierarchically rough superhydrophobic surfaces. Langmuir 28(6):3138–3145.10.1021/la203155d ↗
35. Teisala, H., Tuominen, M., Aromaa, M., Stepien, M., Mäkelä, J.M., Saarinen, J.J., Toivakka, M., Kuusipalo, J. (2013a) High- and low-adhesive superhydrophobicity on the liquid flame spray-coated board and paper: Structural effects on surface wetting and transition between the low- and high-adhesive states. Colloid Polym. Sci. 291(2):447–455.10.1007/s00396-012-2833-5 ↗
36. Teisala, H., Tuominen, M., Stepien, M., Haapanen, J., Mäkelä, J.M., Saarinen, J.J., Toivakka, M., Kuusipalo, J. (2013b) Wettability conversion on the liquid flame spray generated superhydrophobic TiO2{\mathrm{TiO}2} nanoparticle coating on paper and board by photocatalytic decomposition of spontaneously accumulated carbonaceous overlayer. Cellulose 20(1):391–408.10.1007/s10570-012-9825-y ↗
37. Wang, P., Lu, Z., Zhang, D. (2015) Slippery liquid-infused porous surfaces fabricated on aluminum as a barrier to corrosion induced by sulfate reducing bacteria. Corros. Sci. 93:159–166.10.1016/j.corsci.2015.01.015 ↗
38. Wilson, P.W., Lu, W., Xu, H., Kim, P., Kreder, M.J., Alvarenga, J., Aizenberg, J. (2013) Inhibition of ice nucleation by slippery liquid-infused porous surfaces (SLIPS). Phys. Chem. Chem. Phys. 15(2):581–585.10.1039/C2CP43586A ↗
39. Wong, T.S., Kang, S.H., Tang, S.K.Y., Smythe, E.J., Hatton, B.D., Grinthal, A., Aizenberg, J. (2011) Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity. Nature 477(7365):443–447.10.1038/nature10447 ↗
40. Wooh, S., Butt, H.J. (2017) A photocatalytically active lubricant-impregnated surface. Angew. Chem., Int. Ed. Engl. 56(18):4965–4969.10.1002/anie.201611277 ↗
41. Yang, S., Qiu, R., Song, H., Wang, P., Shi, Z., Wang, Y. (2015) Slippery liquid-infused porous surface based on perfluorinated lubricant/iron tetradecanoate: Preparation and corrosion protection application. Appl. Surf. Sci. 328:491–500.10.1016/j.apsusc.2014.12.067 ↗