Influence of the roughness and shape of quartz particles on their flotation kinetics
Source abstract
Abstract
Surface roughness and shape play an important role on the behavior of particles in various processes such as flotation. In this research, the influence of different grinding methods on the surface roughness and shape characteristics of quartz particles as well as the effect of these parameters on the flotation of the particles was investigated. The surface roughness of the particles was determined by measuring their specific surface area via the gas adsorption method. The shape characteristics of the particles were measured and calculated by images obtained by scanning electron microscopy via an image analysis system. The flotation kinetics was determined using a laboratory flotation cell. The results showed that the particles of rod mill products have higher roughness and elongation ratio and lower roundness than the particles of ball mill products. The flotation kinetics constant of the particles increased with their surface roughness increasing. Particles with higher elongation and lower roundness indicated higher floatability. In addition, the influence of the surface roughness on the flotation kinetics was greater than that of shape parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Minerals Flotation and Separation Techniques · Fluid Dynamics and Mixing · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. H. Kuopanportti, T, Suorsa, O. Dahl, and J. Niinimäki, A model of conditioning in the flotation of a mixture of pyrite and chalcopyrite ores, Int. J. Miner. Process., 59(2000), p.327.10.1016/S0301-7516(00)00003-X ↗
2. R.R. Klimpel, Optimizing the industrial flotation performance of sulfide minerals having some natural floatability, Int. J. Miner. Process., 58(2000), p.77.10.1016/S0301-7516(99)00056-3 ↗
3. M. Xu, Modified flotation rate constant and selectivity index, Miner. Eng., 11(1998), p.271.10.1016/S0892-6875(98)00005-3 ↗
4. J.F. Oliveira, S.M. Saraiva, J.S. Pimenta, and A.P.A. Oliveira, Kinetics of pyrochlore flotation from Araxa mineral deposits, Miner. Eng., 14(2001), p.99.10.1016/S0892-6875(00)00163-1 ↗
5. G.E. Agar, J. Chia, and C.L. Requis, Flotation rate measurements to optimize an operating circuit, Miner. Eng., 11(1998), p.347.10.1016/S0892-6875(98)00013-2 ↗
6. E.C. Çilek, Estimation of flotation kinetic parameters by considering interactions of the operating variables, Miner. Eng., 17(2004), p.81.10.1016/j.mineng.2003.10.008 ↗
7. C. Hiçyilmaz, U. Ulusoy, and M. Yekeler, Effects of the shape properties of talc and quartz particles on the wettability based separation processes, Appl. Surf. Sci., 233(2004), p.204.10.1016/j.apsusc.2004.03.209 ↗
8. U. Ulusoy, C. Hiçyılmaz, and M. Yekeler, Role of shape properties of calcite and barite particles on apparent hydrophobicity, Chem. Eng. Process., 43(2004), p.1047.10.1016/j.cep.2003.10.003 ↗
9. H. Kursun and U. Ulusoy, Influence of shape characteristics of talc mineral on the column flotation behavior, Int. J. Miner. Process., 78(2006), p.262.10.1016/j.minpro.2005.11.003 ↗
10. J.F. Oliver, C. Huh, and S.G. Mason, An experimental study of some effects of solid surface roughness on wetting, Colloids Surf., 1(1980), p.79.10.1016/0166-6622(80)80039-4 ↗
11. W.A. Ducker, R.M. Pashley, and B.W. Ninham, The flotation of quartz using a double-chained cationic surfactant, J. Colloid Interface Sci., 128(1988), p.66.10.1016/0021-9797(89)90385-8 ↗
12. D. Feng and C. Aldrich, A comparison of the flotation of ore from the Merensky Reef after wet and dry grinding, Int. J. Miner. Process., 60(2000), p.115.10.1016/S0301-7516(00)00010-7 ↗
13. M. Krasowska and K. Malysa, Kinetics of bubble collision and attachment to hydrophobic solids: I. Effect of surface roughness, Int. J. Miner. Process., 81(2007), p.205.10.1016/j.minpro.2006.05.003 ↗
14. I. Szleifer, A. Ben-Shaul, and W.M. Gelbert, Chain statistics in micelles and bilayers: effects of surface roughness and internal energy, J. Chem. Phys., 85(1986), p.5345.10.1063/1.451679 ↗
15. M.J. Jaycock and G.D. Parfitt, Chemistry of Interfaces, Ellis Horwood Publications, 1981, p.156.
16. M.E. Hodson, M.R. Lee, and I. Parsons, Origins of the surface roughness of unweathered alkali feldspar grains, Geochim. Cosmochim. Acta, 61(1997), p.3885.10.1016/S0016-7037(97)00197-X ↗
17. A.M. Vieira and A.E.C Peres, The effect of amine type, pH, and size range in the flotation of quartz, Miner. Eng., 20(2007), p.1008.10.1016/j.mineng.2007.03.013 ↗