Mullins effect on incompressible hyperelastic cylindrical tube in finite torsion
Source abstract
Abstract
The isotropic softening effect in non-homogeneous deformation resulting from combined effect of torsion, extension and inflation of cylindrical rubber tube is discussed. The effects of deformation induced anisotropy, permanent set and hysteresis are neglected. A general neo-Hookean parent material model is illustrated and subsequently the stress-softening effect on the same hyperelastic material is analyzed. Simple torsion of cylindrical tube with neo-Hookean material model is analyzed and the results obtained are shown in various plots. Analytical results are compared with the experimental results of Rivlin and Saunders. Universal relations are also established for incompressible, isotropic, hyperelastic material for non-homogeneous deformation with isotropic damage function in both virgin and stress-softened cases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Elasticity and Material Modeling · Elasticity and Wave Propagation · Rheology and Fluid Dynamics Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Arruda, E.M., Boyce, M.C.: A three-dimensional constitutive model for the large stretch behaviour of rubber elastic materials. J. Mech. Phys. Solids 41(2), 389–412 (1993)10.1016/0022-5096(93)90013-6 ↗
2. Beatty, M.F.: A class of universal relations in isotropic elasticity theory. J. Elasticity 17(2), 113–121 (1987)10.1007/BF00043019 ↗
3. Beatty, M.F.: A class of universal relations for constrained, isotropic elastic materials. Acta Mech. 80(3–4), 299–312 (1989)10.1007/BF01176166 ↗
4. Beatty, M.F., Krishnaswamy, S.: Theory of stress-softening in incompressible isotropic materials. J. Mech. Phys. Solids 48(9), 1931–1965 (2000)10.1016/S0022-5096(99)00085-X ↗
5. Bouasse H, Carrière Z (1903) Courbes de traction du caoutchouc vulcanise. Ann. Fac. Sci. Univ. Toulouse 5, 257–28310.5802/afst.205 ↗
6. Bueche, F.: Molecular basis for the Mullins effect. J. Appl. Polym. Sci. 4, 107–114 (1960)10.1002/app.1960.070041017 ↗
7. D’Ambrosio, P., De Tommasi, D., Ferri, D., Puglisi, G.: A phenomenological model for healing and hysteresis in rubber-like material. Int. J. Eng. Sci. 46(4), 293–305 (2008)10.1016/j.ijengsci.2007.12.002 ↗
8. De Tommasi, D., Puglisi, G., Saccomandi, G.: A micromechanics-based model for the Mullins effect. J. Rheol. 50(4), 495–512 (2006)10.1122/1.2206706 ↗
9. De Tommasi, D., Puglisi, G.: Mullins effect for a cylinder subjected to combined extension and torsion. J. Elasticity 86(1), 85–99 (2007)10.1007/s10659-006-9087-8 ↗
10. Diani, J., Bruno, F., Gilormini, P.: A review on the Mullins effect. Eur. Polym. J. 45, 601–612 (2009)10.1016/j.eurpolymj.2008.11.017 ↗
11. Dorfmann, A., Ogden, R.W.: A constitutive model for the Mullins effect with permanent set in particle-reinforced rubber. Int. J. Solids Struct. 41(7), 1855–1878 (2004)10.1016/j.ijsolstr.2003.11.014 ↗
12. Drozdov, A.D., Dorfmann, A.I.: Stress–strain relations in finite viscoelastoplasticity of rigid-rod networks: applications to the Mullins effect. Continuum Mech. Thermodyn. 13(3), 183–205 (2001)10.1007/s001610100049 ↗
13. Govindjee, S., Simo, J.C.: A micro-mechanically based continuum damage model for carbon black-filled rubbers incorporating Mullins’ effect. J. Mech. Phys. Solids 39(1), 87–112 (1991)10.1016/0022-5096(91)90032-J ↗
14. Green, M.S., Tobolsky, A.V.: A new approach for the theory of relaxing polymeric media. J. Chem. Phys. 14, 87–112 (1946)10.1063/1.1724109 ↗
15. Gurtin, M.E., Francis, E.C.: Simple rate-independent model for damage. J. Spacecraft 18(3), 285–286 (1981)10.2514/3.57817 ↗
16. Harwood, J.A.C., Mullins, L., Payne, A.R.: Stress softening in natural rubber vulcanizates. Part II: stress softening effects in pure gum and filler loaded rubbers. J. Appl. Polym. Sci. 9, 3011–3021 (1965)10.1002/app.1965.070090907 ↗
17. Holt, W.L.: Behavior of rubber under repeated stresses. Rubber Chem. Technol. 5, 79–89 (1932)10.5254/1.3539319 ↗
18. Horgan, C.O., Murphy, J.G.: Torsion of incompressible fibre-reinforced nonlinearly elastic circular cylinders. J. Elasticity 103(2), 235–246 (2011)10.1007/s10659-010-9282-5 ↗
19. Horgan, C.O., Murphy, J.G.: Finite extension and torsion of fibre-reinforced non-linearly elastic circular cylinders. Int. J. Non-Linear Mech. 47(2), 97–104 (2012)10.1016/j.ijnonlinmec.2011.03.003 ↗
20. Horgan, C.O., Ogden, R.W., Saccomandi, G.: A theory of stress softening of elastomers based on finite chain extensibility. Proc. R. Soc. Lond. 460, 1737–1754 (2004)10.1098/rspa.2003.1248 ↗
21. Horgan, C.O., Saccomandi, G.: Constitutive models for compressible nonlinearly elastic materials with limiting chain extensibility. J. Elasticity 77(2), 123–138 (2004)10.1007/s10659-005-4408-x ↗
22. Johnson, M.A., Beatty, M.F.: The Mullins effect in uniaxial extension and its influence on transverse vibration of a rubber string. Cont. Mech. Therm. 5(2), 83–115 (1993)10.1007/BF01141446 ↗
23. Kanner, L.M., Horgan, C.O.: Inhomogeneous shearing of strain-stiffening rubber-like hollow circular cylinders. Int. J. Solids Struct. 45(20), 5464–5482 (2008)10.1016/j.ijsolstr.2008.05.030 ↗
24. Krishnaswamy, S., Beatty, M.F.: Damage induced stress-softening in the torsion, extension and inflation of a cylindrical tube. Q. J. Mech. Appl. Math. 54(2), 295–327 (2001)10.1093/qjmam/54.2.295 ↗
25. Lopez-Pamies, O.: A new I1-based hyperelastic model for rubber elastic materials. C R Mecanique 338(1), 3–11 (2010)10.1016/j.crme.2009.12.007 ↗
26. Marckmann, G., Verron, E., Gornet, L., Chagnon, G., Charrier, P., Fort, P.: A theory of network alteration for the Mullins effect. J. Mech. Phys. Solids 50(9), 2011–2028 (2002)10.1016/S0022-5096(01)00136-3 ↗
27. Mullins, L.: Effect of stretching on the properties of rubber. J. Rubber Res. 16, 275–289 (1947)
28. Mullins, L., Tobin, N.R.: Theoretical model for the elastic behavior of filled-reinforced vulcanized rubbers. J. Rubber Chem. Tech. 30, 555–571 (1957)10.5254/1.3542705 ↗
29. Ogden, R.W., Roxburgh, D.G.: A pseudo-elastic model for the Mullins effect in filled rubber. Proc. R. Soc. Lond. A 455, 2861–2877 (1999)10.1098/rspa.1999.0431 ↗
30. Qi, H.J., Boyce, M.C.: Stress–strain behavior of thermoplastic polyurethanes. Mech. Mater. 37(8), 817–839 (2005)10.1016/j.mechmat.2004.08.001 ↗
31. Rivlin RS, Saunders DW (1951) Large elastic deformation of isotropic materials. VII. Experiments on the deformations of rubber. Philos. Trans. R. Soc. Lond. A 243, 251–288 (1951)
32. Simo, J.C.: On a fully three-dimensional finite-strain viscoelastic damage model: formulation and computational aspects. Comput. Methods Appl. Mech. Eng. 60(2), 153–173 (1987)10.1016/0045-7825(87)90107-1 ↗
33. Tobolsky, A.: Properties and structure of polymers. Wiley, New York (1960)
34. Wineman, A.S., Rajagopal, K.R.: On a constitutive theory for materials undergoing microstructural changes. Arch. Mech. 42, 53–75 (1990)
35. Wineman, A., Shaw, J.: Combined deformations and temperature-induced scission in a rubber cylinder in torsion. Int. J. Non Linear Mech. 42(2), 330–335 (2007)10.1016/j.ijnonlinmec.2007.02.005 ↗
36. Zúñiga, A.E.: A phenomenological energy-based model to characterize stress-softening effect in elastomers. Polymer 46(10), 3496–3506 (2005)10.1016/j.polymer.2005.02.093 ↗
37. Zúñiga, A.E., Beatty, M.F.: A new phenomenological model for stress-softening in elastomers. J. Appl. Math. Phys. (ZAMP) 53(5), 794–814 (2002)10.1007/PL00022513 ↗