The effect of frequency of vibration and humidity on the stick–slip amplitude
Source abstract
Abstract
This work examines the variation of stick–slip amplitude with the variation of frequency of vibration and relative humidity on a mild steel disc. A pin-on-disc machine, developed by the authors, capable of vibrating the disc at different frequency is used for the experiments. During the experiments, normal load, speed, relative humidity and frequency of vibration were varied. The results reveal that, depending on the conditions, a different stick–slip behavior can arise in the same system. It is found that the rate of reduction of stick–slip amplitude has a particular relationship with the frequency of vibration and the relative humidity. It is also observed that the transition from irregular to regular stick–slip behavior is load dependent, while the transition from irregular to smooth sliding is load independent.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Brake Systems and Friction Analysis · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Abdo, J., Al-Rawahi, N.: Determination of the effect of humidity and relative speed on the coefficient of friction using response surface methodology. Surf. Interface Anal. 40, 889–892 (2008)10.1002/sia.2605 ↗
2. Abdo, J., Alyahmadi, A.: The effect of controlled frequency and amplitude of vibration on friction. Solid State Phenom. 147, 380–385 (2009)10.4028/www.scientific.net/SSP.147-149.380 ↗
3. Bowden, F.P., Tabor, D.: Friction and Lubrication. Oxford University Press, Oxford (1954)
4. Carlson, J., Langer, J.: Mechanical model of an earthquake fault. Phys. Rev. A 40, 6470–6484 (1989)10.1103/PhysRevA.40.6470 ↗
5. Gourdon, D., Israelachvili, J.: Transition between smooth and complex stick-slip sliding of surfaces. Phys. Rev. E 68, 1–10 (2003)10.1103/PhysRevE.68.021602 ↗
6. Hymann, F., Rabinowicz, E., Rightmire, B.G.: Friction apparatus for very low-speed sliding studies. Rev. Sci. Instrum. 26, 56–58 (1954)10.1063/1.1771241 ↗
7. Kang, J., Krousgrill, C., Sadeghi, F.: Wave pattern motion and stick–slip limit cycle oscillation of a disc brake. J. Sound Vib. 325(3), 552–564 (2009)10.1016/j.jsv.2009.03.030 ↗
8. Kenmoe, G., Kofane, T.: Frictional stick-slip dynamics in a nonsinusoidal Remoissenet-Peyrard potential. Eur. Phys. J. B 55, 347–354 (2007)10.1140/epjb/e2007-00078-6 ↗
9. McClelland, G.: Friction and Weakly Increasing Interfaces, pp. 1–16. Springer, New York (1989)
10. McClelland, G.: Chemistry and Physics of Solid Surfaces. VIII. Springer, Berlin (1990)
11. Meyer, E., Overney, R., Dransfeld, K., Gyalog, T.: Nanoscience: Friction and Rheology of Nanometer Scale. World Scientific Publishing, Singapore (1998)10.1142/3026 ↗
12. Nasuno, S., Kurdolli, A., Gollub, J.: Friction in granular layers: hysteresis and precursors. Phys. Rev. Lett. 79, 949–952 (1997)10.1103/PhysRevLett.79.949 ↗
13. Person, B.: Theory of friction: the role of elasticity in boundary lubrication. Phys. Rev. B 50, 4771–4786 (1994)10.1103/PhysRevB.50.4771 ↗
14. Popp, K., Rudolph, M.: Vibration control to avoid stick-slip motion. J. Vib. Control 10, 1585–1600 (2004)10.1177/1077546304042026 ↗
15. Rabinowics, E.: Friction and Wear of Materials, 2nd edn. Wiley, New York (1995)
16. Robbins, M., Thompson, P.: Critical velocity of stick-slip motion. Science 253, 916 (1991)10.1126/science.253.5022.916 ↗
17. Ruths, M., Berman, A., Israelachvili, J.: In: Bhushan, B. (ed.) Handbook of Nanotechnology. Springer, Berlin (2005)
18. Sampson, J., Morgan, F., Reed, D., Muskat, M.: Friction behaviour during the slip portion of stick-slip process. J. Appl. Phys. 14, 689–700 (1943)10.1063/1.1714948 ↗
19. Thompson, P., Robbins, M.: Origin of stick-slip motion in boundary lubrication. Science 250, 792–794 (1990)10.1126/science.250.4982.792 ↗