A distributed parametric model of Brinson shape memory alloy based resonant frequency tunable cantilevered PZT energy harvester

M. G. Vasundhara; M. Senthilkumar; G. K. Kalavathi

doi:10.1007/s10999-018-9429-2

journal article·2019-09

A distributed parametric model of Brinson shape memory alloy based resonant frequency tunable cantilevered PZT energy harvester

M. G. Vasundhara, M. Senthilkumar, G. K. Kalavathi

International Journal of Mechanics and Materials in Design· Volume 15· Issue 3

Publisher page

Source abstract

Abstract

This paper presents, an analytical model of piezoelectric vibration energy harvester consists of Brinson shape memory alloy (SMA) plate which can tune the resonant frequency. As the energy harvester should be tuned to excitation frequency in order to drive the maximum power, the temperature of SMA is varied to tune the natural frequency of the composite beam. In addition to SMA it also consists of piezoelectric layer and substructure layer. Using Euler–Bernoulli beam assumption, the expressions for frequency response of voltage, current and power outputs with temperature are obtained. From parametric study, it is observed that the tuning of natural frequency is 25–26%, for first three modes of vibration in short and open circuit conditions.

Source: openaire · Quality: candidate unverified · Source record ↗

Research context

Metals & alloys Composites

OpenAlex topics: Innovative Energy Harvesting Technologies · Acoustic Wave Phenomena Research · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references

1. Aladwani, A., Aldraihem, O., Baz, A.: A distributed parameter cantilevered piezoelectric energy harvester with a dynamic magnifier. Mech. Adv. Mater. Struct. 21, 566–578 (2014). https://doi.org/10.1080/15376494.2012.69960010.1080/15376494.2012.699600 ↗

2. Auricchio, F., Sacco, E.: A superelastic shape-memory-alloy beam model. J. Intell. Mater. Syst. Struct. 8, 489–501 (1997). https://doi.org/10.1177/1045389X970080060210.1177/1045389X9700800602 ↗

3. Brinson, L.C.: One-dimensional constitutive behavior of shape memory alloys: thermomechanical derivation with non-constant material functions and redefined martensite internal variable. J. Intell. Mater. Syst. Struct. 4, 229–242 (1993). https://doi.org/10.1177/1045389X930040021310.1177/1045389X9300400213 ↗

4. Bui, T.Q., Nguyen, D.D., Zhang, X., Hirose, S., Batra, R.C.: Analysis of 2-dimensional transient problems for linear elastic and piezoelectric structures using the consecutive-interpolation quadrilateral element (CQ4). Eur. J. Mech. A/Solids 58, 112–130 (2016). https://doi.org/10.1016/J.EUROMECHSOL.2016.01.01010.1016/j.euromechsol.2016.01.010 ↗

5. Bui, T.Q., Nguyen, M.N., Zhang, C., Pham, D.A.K.: An efficient meshfree method for analysis of two-dimensional piezoelectric structures. Smart Mater. Struct. 20, 065016 (2011). https://doi.org/10.1088/0964-1726/20/6/06501610.1088/0964-1726/20/6/065016 ↗

6. Caughey, T.K., O’Kelly, M.E.J.: Classical normal modes in damped linear dynamic systems. J. Appl. Mech. 32, 583 (1965). https://doi.org/10.1115/1.362726210.1115/1.3627262 ↗

7. Eichhorn, C., Tchagsim, R., Wilhelm, N., Woias, P.: A smart and self-sufficient frequency tunable vibration energy harvester. J. Micromech. Microeng. 21, 104003 (2011). https://doi.org/10.1088/0960-1317/21/10/10400310.1088/0960-1317/21/10/104003 ↗

8. Erturk, A., Inman, D.J.: A distributed parameter electromechanical model for cantilevered piezoelectric energy harvesters. J. Vib. Acoust. 130, 041002 (2008a). https://doi.org/10.1115/1.289040210.1115/1.2890402 ↗

9. Erturk, A., Inman, D.J.: On mechanical modeling of cantilevered piezoelectric vibration energy harvesters. J. Intell. Mater. Syst. Struct. 19, 1311–1325 (2008b). https://doi.org/10.1177/1045389x0708563910.1177/1045389X07085639 ↗

10. Erturk, A., Inman, D.J.: An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations. Smart Mater. Struct. 18, 025009 (2009a). https://doi.org/10.1088/0964-1726/18/2/02500910.1088/0964-1726/18/2/025009 ↗

11. Erturk, A., Inman, D.J.: An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations. Smart Mater. Struct. 18, 025009 (2009b). https://doi.org/10.1177/1045389x0708563910.1088/0964-1726/18/2/025009 ↗

12. Erturk, A., Inman, D.J.: Piezoelectric Energy Harvesting. Wiley, Chichester (2011)10.1002/9781119991151 ↗

13. Hashemi, S.M.T., Khadem, S.E.: Modeling and analysis of the vibration behavior of a shape memory alloy beam. Int. J. Mech. Sci. 48, 44–52 (2006). https://doi.org/10.1016/J.IJMECSCI.2005.09.01110.1016/j.ijmecsci.2005.09.011 ↗

14. IEEE: Publication and proposed revision of ANSI/IEEE standard 176-1987 “ANSI/IEEE standard on piezoelectricity”. IEEE Trans. Ultrason. Ferroelectr. Freq. Control. 43, 717 (1996). https://doi.org/10.1109/TUFFC.1996.53547710.1109/TUFFC.1996.535477 ↗

15. Karadag, C.V., Topaloglu, N.: A self-sufficient and frequency tunable piezoelectric vibration energy harvester. J. Vib. Acoust. 139, 011013 (2016). https://doi.org/10.1115/1.403477510.1115/1.4034775 ↗

16. Kim, Y.-J., Lee, C.-H., Kim, J.-H., Lim, J.H.: Numerical modeling of shape memory alloy plates considering tension/compression asymmetry and its verification under pure bending. Int. J. Solids Struct. 136–137, 77–88 (2018). https://doi.org/10.1016/J.IJSOLSTR.2017.12.00410.1016/j.ijsolstr.2017.12.004 ↗

17. Liu, P., Yu, T., Bui, T.Q., Zhang, C., Xu, Y., Lim, C.W.: Transient thermal shock fracture analysis of functionally graded piezoelectric materials by the extended finite element method. Int. J. Solids Struct. 51, 2167–2182 (2014). https://doi.org/10.1016/J.IJSOLSTR.2014.02.02410.1016/j.ijsolstr.2014.02.024 ↗

18. Mansour, M.O., Arafa, M.H., Megahed, S.M.: Resonator with magnetically adjustable natural frequency for vibration energy harvesting. Sens. Actuators A Phys. 163, 297–303 (2010). https://doi.org/10.1016/J.SNA.2010.07.00110.1016/j.sna.2010.07.001 ↗

19. Mouleeswaran, S.K., Mani, Y., Keerthivasan, P., Veeraragu, J.: Vibration control of small horizontal axis wind turbine blade with shape memory alloy. Smart Struct. Syst. 21, 257 (2018). https://doi.org/10.12989/SSS.2018.21.3.25710.12989/SSS.2018.21.3.257 ↗

20. Rhimi, M., Lajnef, N.: Tunable Energy Harvesting From Ambient Vibrations. In: ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, ASME, vol. 1, pp. 529–534 (2010)10.1115/SMASIS2010-3740 ↗

21. Rhimi, M., Lajnef, N.: Modeling of a Composite Piezoelectric/Shape Memory Alloy Cantilevered Beam for Vibration Energy Harvesting. In: Mechanics and Behavior of Active Materials; Integrated System Design and Implementation; Bio-Inspired Materials and Systems; Energy Harvesting, ASME, vol. 2. p. 903 (2012)10.1115/SMASIS2012-8174 ↗

22. Roundy, S., Wright, P.K.: A piezoelectric vibration based generator for wireless electronics. Smart Mater. Struct. 13, 1131–1142 (2004). https://doi.org/10.1088/0964-1726/13/5/01810.1088/0964-1726/13/5/018 ↗

23. Senthilkumar, M., Vasundhara, M.G., Kalavathi, G.K.: Electromechanical analytical model of shape memory alloy based tunable cantilevered piezoelectric energy harvester. Int. J. Mech. Mater. Des. pp. 1–17 (2018). https://doi.org/10.1007/s10999-018-9413-x10.1007/s10999-018-9413-x ↗

24. Tang, L., Wang, J.: Size effect of tip mass on performance of cantilevered piezoelectric energy harvester with a dynamic magnifier. Acta Mech. 228, 3997–4015 (2017). https://doi.org/10.1007/s00707-017-1910-810.1007/s00707-017-1910-8 ↗

25. Timoshenko, S., Young, D.H.: Elements of Strength of Materials. Van Nostrand Renhold, New York (1968)