Design and performance analysis of a novel parallel servo press with redundant actuation
Source abstract
Abstract
The large capacity servo press is traditionally realized by means of simultaneous actuation of multiple motors. But there exist the over-constraint problem and interference among actuators, which increases the control difficulty and product cost. This paper proposed a novel parallel servo press with redundant actuation, which can avoid the over-constraint and actuation interference. The kinematic and dynamic model of the present servo press are established and thus the kinematic and dynamic performances are obtained under three working modes, i.e. the same and opposite direction modes and non-synchronous mode. The prototype of the active mechanism with the redundant actuators has been manufactured. The kinematic experiments are carried out by using API laser tracking system and the theoretical calculation results agree with the measured data very well, which validates the theoretical model and the present press mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Robotic Mechanisms and Dynamics · Mechanical Engineering and Vibrations Research · Control Systems in Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Alain, C.: Dynamic modeling of parallel robots for computed-torque control implementation. Int. J. Robotics Res. 17(12), 1325–1336 (1998)10.1177/027836499801701205 ↗
2. Bai, Yongjun, Gao, Feng, Guo, Weizhong: Design of mechanical presses driven by multi-servomotor. J. Mech. Sci. Technol. 25(9), 2323–2334 (2011)10.1007/s12206-011-0603-9 ↗
3. Bai, Yongjun, Gao, Feng, Guo, Weizhong, Yue, Yi: Performance analytical study of the dual screws actuation mechanism. J. Mech. Sci. Technol. 26(10), 3277–3289 (2012)10.1007/s12206-012-0807-7 ↗
4. Chifu Yang, Qitao Huang, Zhengmao Ye, et al.: Dynamic modeling of spatial 6-DOF parallel robots using kane method for control purposes. Proceedings of Second International Conference on Intelligent Human-Machine Systems and Cybernetics, vol. 2, 26–28 Aug 2010, Nanjing, China, pp. 180–18310.1109/IHMSC.2010.145 ↗
5. Guo, Weizhong, Gao, Feng: Design of a servo mechanical press with redundant actuation. Chin. J. Mech. Eng. 22(4), 574–579 (2009)10.3901/CJME.2009.04.574 ↗
6. He, Yupeng, Zhao, Shengdun, Zou, Jun, et al.: Study of utilizing differential gear train to achieve hybrid mechanism of mechanical press. Sci. China Series E 50(1), 69–80 (2007)10.1007/s11431-007-0003-7 ↗
7. He, Jun, Gao, Feng, Bai, Yongjun: A two-step calibration methodology of multi-actuated mechanical servo press with parallel topology. Measurement 46(8), 2269–2277 (2013)10.1016/j.measurement.2013.03.031 ↗
8. Jyhwen Wang.: Design of horizontal mechanical presses for deep drawing and ironing process. In: Proceedings of IMECE2002 ASME International Mechanical Engineering Congress & Exposition, November 17–22, 2002, New Orleans, Louisiana, pp. 32–3610.1115/IMECE2002-39427 ↗
9. Kada, K., Mori, K., Altan, T., et al.: Mechanical servo press technology for metal forming. CIRP Ann. Manuf. Technol. 60(2), 651–672 (2011)10.1016/j.cirp.2011.05.007 ↗
10. Khalil W.: Dynamic modeling of robots using recursive Newton-Euler techniques. In: 7th International Conference on Informatics in Control, Automation and Robotics, Portugal, 15–18 June 2010
11. Pendar H, Vakil M, Zohoor H.: Efficient dynamic equations of 3-RPS parallel mechanism through Lagrange method. In: Proceedings of IEEE Conference on Robotics, Automation and Mechatronics, December 1-3, 2004, Singapore, pp. 1 152–1157
12. Rabindran, Dinesh, Tesar, Delbert: Parametric Design and Power-Flow Analysis of Parallel Force/Velocity Actuators. J. Mech. Robotics 1, 011007 (2009)10.1115/1.2959100 ↗
13. Soong, R.C.: A new design method for single DOF mechanical presses with variable input speeds and length-adjustable driving links. Mech. Mach. Theory 45(3), 496–510 (2010)10.1016/j.mechmachtheory.2009.10.008 ↗
14. Staicu, S.: Inverse dynamics of the 3-PRR planar parallel robot. Robotics Auton. Sys. 57(5), 556–563 (2009)10.1016/j.robot.2008.09.005 ↗
15. Tian, Zhixiang, Wu, Hongtao: Spatial operator algebra for free-floating space robot modeling and simulation. Chin. J. Mech. Eng. 23(5), 635–640 (2010)10.3901/CJME.2010.05.635 ↗
16. Tso, P.L., Liang, K.C.: A nine-bar linkage for mechanical forming presses. Int. J. Mach. Tools Manuf. 42, 139–145 (2002)10.1016/S0890-6955(01)00037-2 ↗
17. Yan, H.S., Chen, W.R.: A variable input speed approach for improving the output motion characteristics of Watt-type presses. Int. J. Mach. Tools Manuf. 40(4), 675–690 (2000)10.1016/S0890-6955(99)00087-5 ↗
18. Yan, H.S., Chen, W.R.: Optimized kinematics properties for Stevenson-type presses with variable input speed approach. J. Mech. Des. 124(2), 350–354 (2002)10.1115/1.1456163 ↗
19. Yossifon, S., Shivpuri, R.: Design considerations for the electric servomotor driven 30 ton double knuckle press for precision forming. Int. J. Mach. Tools Manuf. 33(2), 209–222 (1993)10.1016/0890-6955(93)90074-5 ↗
20. Yossifon, S., Messerly, S., Kropp, D., et al.: A servo motor driven multi-action press for sheet metal forming. Int. J. Mach. Tools Manuf. 31(3), 345–359 (1991)10.1016/0890-6955(91)90080-M ↗
21. Zhang, J., Gao, F., Yu, H., et al.: Design and development of a novel redundant and fault-tolerant actuator unit for heavy-duty parallel manipulators. Proc. IMechE Part C 225(12), 3031–3047 (2011)10.1177/0954406211411864 ↗
22. Zhang, Dan, Xiaoping, Su, Gao, Zhen, et al.: Design, analysis and fabrication of a novel three degrees of freedom parallel robotic manipulator with decoupled motions. Int. J. Mech. Mater. Design 9(3), 199–212 (2013)10.1007/s10999-012-9209-3 ↗