Electromechanical analytical model of shape memory alloy based tunable cantilevered piezoelectric energy harvester
Source abstract
Abstract
The resonant frequency of electromechanical energy harvester should be tuned to ambient frequency so as to maximize the harvester power. In this paper, it is proposed to tune the natural frequency of the energy harvester by varying the martensite volume fraction (0–1) of shape memory alloy (SMA). It is found that the shifting of natural frequency is around 8–10% for first three modes of vibration. This paper presents the exact analytical solution for composite cantilevered energy harvester composed of piezoelectric energy harvester layer, substructure layer and SMA layer using the assumption of Euler–Bernoulli beam. The beam base displacement in transverse direction with small angular rotation is due to base excitation. The electromechanical coupled equations of response are derived and then reduced to harmonic behavior. The expressions for frequency response of voltage output, current output and power output are obtained. Finally, a parametric case study of composite cantilevered energy harvester with shape memory alloy and important behavior of the electromechanical coupled system for short circuit and open circuit behaviors are studied in detail.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative Energy Harvesting Technologies · Structural Health Monitoring Techniques · Acoustic Wave Phenomena Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Auricchio, F., Sacco, E.: A superelastic shape-memory-alloy beam model. J. Intell. Mater. Syst. Struct. 8, 489–501 (1997). https://doi.org/10.1177/1045389X970080060210.1177/1045389X9700800602 ↗
2. Bhattacharya, S., Singh, I.V., Mishra, B.K., Bui, T.Q.: Fatigue crack growth simulations of interfacial cracks in bi-layered FGMs using XFEM. Comput. Mech. 52, 799–814 (2013). https://doi.org/10.1007/s00466-013-0845-810.1007/s00466-013-0845-8 ↗
3. American, A., Standard, N.: An American National Standard IEEE Standard on Piezoelectricity (1987)
4. Bui, T.Q.: Extended isogeometric dynamic and static fracture analysis for cracks in piezoelectric materials using NURBS. Comput. Methods Appl. Mech. Eng. 295, 470–509 (2015). https://doi.org/10.1016/J.CMA.2015.07.00510.1016/j.cma.2015.07.005 ↗
5. Bui, T.Q., Zhang, C.: Extended finite element simulation of stationary dynamic cracks in piezoelectric solids under impact loading. Comput. Mater. Sci. 62, 243–257 (2012). https://doi.org/10.1016/J.COMMATSCI.2012.05.04910.1016/j.commatsci.2012.05.049 ↗
6. Bui, T.Q., Ngoc Nguyen, M., Zhang, C.: A moving Kriging interpolation-based element-free Galerkin method for structural dynamic analysis. Comput. Methods Appl. Mech. Eng. 200, 1354–1366 (2011a). https://doi.org/10.1016/j.cma.2010.12.01710.1016/j.cma.2010.12.017 ↗
7. Bui, T.Q., Nguyen, M.N., Zhang, C.: An efficient meshfree method for vibration analysis of laminated composite plates. Comput. Mech. 48, 175–193 (2011b). https://doi.org/10.1007/s00466-011-0591-810.1007/s00466-011-0591-8 ↗
8. Bui, T.Q., Nguyen, M.N., Zhang, C., Pham, D.A.K.: An efficient meshfree method for analysis of two-dimensional piezoelectric structures. Smart Mater. Struct. 20, 65016 (2011c). https://doi.org/10.1088/0964-1726/20/6/06501610.1088/0964-1726/20/6/065016 ↗
9. Bui, T.Q., Khosravifard, A., Zhang, C., Hematiyan, M.R., Golub, M.V.: Dynamic analysis of sandwich beams with functionally graded core using a truly meshfree radial point interpolation method. Eng. Struct. 47, 90–104 (2013). https://doi.org/10.1016/J.ENGSTRUCT.2012.03.04110.1016/j.engstruct.2012.03.041 ↗
10. Bui, T.Q., Vo, D.Q., Zhang, C., Nguyen, D.D.: A consecutive-interpolation quadrilateral element (CQ4): formulation and applications. Finite Elem. Anal. Des. 84, 14–31 (2014). https://doi.org/10.1016/J.FINEL.2014.02.00410.1016/j.finel.2014.02.004 ↗
11. Bui, T.Q., Nguyen, D.D., Zhang, X., Hirose, S., Batra, R.C.: Analysis of 2-dimensional transient problems for linear elastic and piezoelectric structures using the consecutive-interpolation quadrilateral element (CQ4). Eur. J. Mech. A Solids 58, 112–130 (2016). https://doi.org/10.1016/J.EUROMECHSOL.2016.01.01010.1016/j.euromechsol.2016.01.010 ↗
12. Caughey, T.K., O’Kelly, M.E.J.: Classical normal modes in damped linear dynamic systems. J. Appl. Mech. 32, 583 (1965). https://doi.org/10.1115/1.362726210.1115/1.3627262 ↗
13. Challa, V.R., Prasad, M.G., Shi, Y., Fisher, F.T.: A vibration energy harvesting device with bidirectional resonance frequency tunability. Smart Mater. Struct. 17, 15035 (2008). https://doi.org/10.1088/0964-1726/17/01/01503510.1088/0964-1726/17/01/015035 ↗
14. Eichhorn, C., Tchagsim, R., Wilhelm, N., Woias, P.: A smart and self-sufficient frequency tunable vibration energy harvester. J. Micromech. Microeng. 21, 104003 (2011). https://doi.org/10.1088/0960-1317/21/10/10400310.1088/0960-1317/21/10/104003 ↗
15. Erturk, A., Inman, D.J.: On mechanical modeling of cantilevered piezoelectric vibration energy harvesters. J. Intell. Mater. Syst. Struct. 19, 1311–1325 (2008). https://doi.org/10.1177/1045389X0708563910.1177/1045389X07085639 ↗
16. Erturk, A., Inman, D.J.: An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations. Smart Mater. Struct. 18, 25009 (2009). https://doi.org/10.1088/0964-1726/18/2/02500910.1088/0964-1726/18/2/025009 ↗
17. Erturk, A., Inman, D.J.: Piezoelectric Energy Harvesting. Wiley, Chichester (2011)10.1002/9781119991151 ↗
18. Eshghinejad, A., Elahinia, M.: Exact solution for bending of shape memory alloy superelastic beams. In: ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, vol. 2, pp. 345–352. ASME (2011)10.1115/SMASIS2011-5151 ↗
19. Fakhzan, M.N., Muthalif, A.G.A.: Harvesting vibration energy using piezoelectric material: Modeling, simulation and experimental verifications. Mechatronics 23, 61–66 (2013). https://doi.org/10.1016/J.MECHATRONICS.2012.10.00910.1016/j.mechatronics.2012.10.009 ↗
20. Hashemi, S.M.T., Khadem, S.E.: Modeling and analysis of the vibration behavior of a shape memory alloy beam. Int. J. Mech. Sci. 48, 44–52 (2006). https://doi.org/10.1016/J.IJMECSCI.2005.09.01110.1016/j.ijmecsci.2005.09.011 ↗
21. John, S., Hariri, M.: Effect of shape memory alloy actuation on the dynamic response of polymeric composite plates. Compos. A Appl. Sci. Manuf. 39, 769–776 (2008). https://doi.org/10.1016/J.COMPOSITESA.2008.02.00510.1016/j.compositesa.2008.02.005 ↗
22. Karadag, C.V., Topaloglu, N.: A self-sufficient and frequency tunable piezoelectric vibration energy harvester. J. Vib. Acoust. 139, 11013 (2016). https://doi.org/10.1115/1.403477510.1115/1.4034775 ↗
23. Lau, K., Zhou, L., Tao, X.: Control of natural frequencies of a clamped–clamped composite beam with embedded shape memory alloy wires. Compos. Struct. 58, 39–47 (2002). https://doi.org/10.1016/S0263-8223(02)00042-910.1016/S0263-8223(02)00042-9 ↗
24. Leland, E.S., Wright, P.K.: Resonance tuning of piezoelectric vibration energy scavenging generators using compressive axial preload. Smart Mater. Struct. 15, 1413–1420 (2006). https://doi.org/10.1088/0964-1726/15/5/03010.1088/0964-1726/15/5/030 ↗
25. Liu, P., Yu, T., Bui, T.Q., Zhang, C., Xu, Y., Lim, C.W.: Transient thermal shock fracture analysis of functionally graded piezoelectric materials by the extended finite element method. Int. J. Solids Struct. 51, 2167–2182 (2014). https://doi.org/10.1016/J.IJSOLSTR.2014.02.02410.1016/j.ijsolstr.2014.02.024 ↗
26. Mansour, M.O., Arafa, M.H., Megahed, S.M.: Resonator with magnetically adjustable natural frequency for vibration energy harvesting. Sens. Actuators A Phys. 163, 297–303 (2010). https://doi.org/10.1016/J.SNA.2010.07.00110.1016/j.sna.2010.07.001 ↗
27. Oudich, A., Thiebaud, F.: A two-way shape memory alloy-piezoelectric bimorph for thermal energy harvesting. Mech. Mater. 102, 1–6 (2016). https://doi.org/10.1016/J.MECHMAT.2016.08.00610.1016/j.mechmat.2016.08.006 ↗
28. Rhimi, M., Lajnef, N.: Modeling of a composite piezoelectric/shape memory alloy cantilevered beam for vibration energy harvesting. In: Mechanics and Behavior of Active Materials; Integrated System Design and Implementation; Bio-Inspired Materials and Systems; Energy Harvesting, vol. 2, p. 903. ASME (2012)10.1115/SMASIS2012-8174 ↗
29. Rhimi, M., Lajnef, N.: Tunable energy harvesting from ambient vibrations. In: ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, vol. 1, pp. 529–534. ASME (2010)10.1115/SMASIS2010-3740 ↗
30. Roundy, S., Wright, P.K.: A piezoelectric vibration based generator for wireless electronics. Smart Mater. Struct. 13, 1131–1142 (2004). https://doi.org/10.1088/0964-1726/13/5/01810.1088/0964-1726/13/5/018 ↗
31. Sharma, K., Bui, T.Q., Zhang, C., Bhargava, R.R.: Analysis of a subinterface crack in piezoelectric bimaterials with the extended finite element method. Eng. Fract. Mech. 104, 114–139 (2013). https://doi.org/10.1016/J.ENGFRACMECH.2013.03.01210.1016/j.engfracmech.2013.03.012 ↗
32. Timoshenko, S., Young, D.H.: Elements of Strength of Materials. Van Nostrand Renhold, New York (1968)
33. Xie, X.D., Wu, N., Yuen, K.V., Wang, Q.: Energy harvesting from high-rise buildings by a piezoelectric coupled cantilever with a proof mass. Int. J. Eng. Sci. 72, 98–106 (2013). https://doi.org/10.1016/J.IJENGSCI.2013.07.00410.1016/j.ijengsci.2013.07.004 ↗