Effectiveness of analytical methods in predicting non-linear contact conditions in hard-on-hard hip implants
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Advanced materials and composites · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Affatato, S., Merola, M., Ruggiero, A.: Development of a novel in silico model to investigate the influence of radial clearance on the acetabular cup contact pressure in hip implants. Materials (Basel). 11, 1–11 (2018). https://doi.org/10.3390/ma1108128210.3390/ma11081282 ↗
2. Aherwar, A., Singh, A., Patnaik, A.: Current and future biocompatibility aspects of biomaterials for hip prosthesis. AIMS Bioeng. 3, 23–43 (2015). https://doi.org/10.3934/bioeng.2016.1.2310.3934/bioeng.2016.1.23 ↗
3. Al-Hajjar, M., Fisher, J., Tipper, J., Williams, S., Jennings, L.M.: Wear of 36-mm BIOLOX delta ceramic-on-ceramic bearing in total hip replacements under edge loading conditions. Proc. Inst. Mech. Eng. Part H J. Eng. Med. 227, 535–542 (2013). https://doi.org/10.1177/095441191247461310.1177/0954411912474613 ↗
4. Alpkaya, A.T., Mihcin, S.: Dynamic computational wear model of PEEK-on-XLPE bearing couple in total hip replacements. Med. Eng. Phys. 117, 104006 (2023). https://doi.org/10.1016/j.medengphy.2023.10400610.1016/j.medengphy.2023.104006 ↗
5. Chang, J., Luo, Z., Wang, Y., Han, Q., Han, F., Zhang, H.: Characterization of joint contact model considering friction of variable stator vane mechanism and application to principle-level mechanism. Int. J. Non Linear Mech. 156, 104511 (2023). https://doi.org/10.1016/j.ijnonlinmec.2023.10451110.1016/j.ijnonlinmec.2023.104511 ↗
6. Chen, Y., Wang, S., Tan, H., Xu, J., He, Y., Wang, S.: Study on the tribological performance at the interface between a steel wire rope and groove during a twisting process. Int. J. Non Linear Mech. 166, 104829 (2024). https://doi.org/10.1016/j.ijnonlinmec.2024.10482910.1016/j.ijnonlinmec.2024.104829 ↗
7. Cilingir, A.C.: Finite element analysis of the contact mechanics of ceramic-on-ceramic hip resurfacing prostheses. J. Bionic Eng. 7, 244–253 (2010). https://doi.org/10.1016/S1672-6529(10)60247-810.1016/S1672-6529(10)60247-8 ↗
8. Ciulli, E., Betti, A., Forte, P.: The applicability of the Hertzian formulas to point contacts of spheres and spherical caps. Lubricants (2022). https://doi.org/10.3390/lubricants1010023310.3390/lubricants10100233 ↗
9. Eames, B., Hills, D.A., Moore, M.R.: Elastic, flat and rounded finite contacts: when should we use half-plane theory? Eur. J. Mech. A/Solids 106, 105306 (2024). https://doi.org/10.1016/j.euromechsol.2024.10530610.1016/j.euromechsol.2024.105306 ↗
10. English, R., Ashkanfar, A., Rothwell, G.: A computational approach to fretting wear prediction at the head-stem taper junction of total hip replacements. Wear 338–339, 210–220 (2015). https://doi.org/10.1016/j.wear.2015.06.01610.1016/j.wear.2015.06.016 ↗
11. Fang, X., Zhang, C., Chen, X., Wang, Y., Tan, Y.: A new universal approximate model for conformal contact and non-conformal contact of spherical surfaces. Acta Mech. 226, 1657–1672 (2015). https://doi.org/10.1007/s00707-014-1277-z10.1007/s00707-014-1277-z ↗
12. Galmiche, R., Migaud, H., Beaulé, P.E.: Hip anatomy and biomechanics relevant to hip replacement. Personalized Hip and Knee Joint Replacement, pp 9–21, Springer Nature (2020). https://doi.org/10.1007/978-3-030-24243-510.1007/978-3-030-24243-5 ↗
13. Gao, Y., Jin, Z., Wang, L., Wang, M.: Finite element analysis of sliding distance and contact mechanics of hip implant under dynamic walking conditions. Proc. Inst. Mech. Eng. Part H J. Eng. Med. 229, 469–474 (2015). https://doi.org/10.1177/095441191558538010.1177/0954411915585380 ↗
14. Heß, M., Forsbach, F.: An analytical model for almost conformal spherical contact problems: application to total hip arthroplasty with uhmwpe liner. Appl. Sci. (2021). https://doi.org/10.3390/app11231117010.3390/app112311170 ↗
15. Hidayat, T., Ammarullah, M.I., Ismail, R., Saputra, E., Lamura, M.D.P., Chethan, K.N., Bayuseno, A.P., Jamari, J.: Investigation of contact behavior on a model of the dual-mobility artificial hip joint for Asians in different inner liner thicknesses. World J. Orthop. 15, 321–336 (2024). https://doi.org/10.5312/wjo.v15.i4.32110.5312/wjo.v15.i4.321 ↗
16. Hidayat, T., Ismail, R., Tauviqirrahman, M., Saputra, E., Ammarullah, M.I., Danny-Pratama-Lamura, M., Bayuseno, A.P., Jamari, J.: Investigation of mesh model for a finite element simulation of the dual-mobility prosthetic hip joint. J. Tribol. 38, 118–140 (2023)
17. Jamari, J., Ammarullah, M.I., Saad, A.P.M., Syahrom, A., Uddin, M., van der Heide, E., Basri, H.: The effect of bottom profile dimples on the femoral head on wear in metal-on-metal total hip arthroplasty. J. Funct. Biomater. (2021). https://doi.org/10.3390/jfb1202003810.3390/jfb12020038 ↗
18. Kashyap, V., Ramkumar, P.: Feasibility study of micro-groove cross hatched surface texturing on Ti6Al4V for improved biotribological performance in metal-on-polymer hip implant. Tribol. Mater. Surf. Interfaces 13, 150–160 (2019). https://doi.org/10.1080/17515831.2019.160658210.1080/17515831.2019.1606582 ↗
19. Kashyap, V., Ramkumar, P.: Comprehensive analysis of geometrical parameters of crosshatched texture for enhanced tribological performance under biological environment. Proc. Inst. Mech. Eng. Part J. Eng. Tribol. 235, 434–452 (2021). https://doi.org/10.1177/135065012091513610.1177/1350650120915136 ↗
20. Kashyap, V., Ramkumar, P.: Surface & coatings technology DLC coating over pre-oxidized and textured Ti6Al4V for superior adhesion and tribo-performance of hip implant. Surf. Coat. Technol. 440, 128492 (2022). https://doi.org/10.1016/j.surfcoat.2022.12849210.1016/j.surfcoat.2022.128492 ↗
21. Knight, M.G., De Lacerda, L.A., Wrobel, L.C., Henshall, J.L.: Parametric study of the contact stresses around spherical and cylindrical inclusions. Comput. Mater. Sci. 25, 115–121 (2002). https://doi.org/10.1016/S0927-0256(02)00255-010.1016/S0927-0256(02)00255-0 ↗
22. Li, J.: Development and validation of a finite-element musculoskeletal model incorporating a deformable contact model of the hip joint during gait. J. Mech. Behav. Biomed. Mater. (2021). https://doi.org/10.1016/j.jmbbm.2020.10413610.1016/j.jmbbm.2020.104136 ↗
23. Liu, C.S., Zhang, K., Yang, L.: Normal force-displacement relationship of spherical joints with clearances. J. Comput. Nonlinear Dyn. 1, 160–167 (2006). https://doi.org/10.1115/1.216287210.1115/1.2162872 ↗
24. Mattei, L., Ciulli, E., Di Puccio, F.P.B.: EHL modelling of hard-on-hard hip implants: comparison of total and resurfacing hip implants. Production 1, 2009 (2009)
25. Mattei, L., Di Puccio, F.: Wear simulation of metal-on-metal hip replacements with frictional contact. J. Tribol. 135, 1–11 (2013). https://doi.org/10.1115/1.402320710.1115/1.4023207 ↗
26. Mattei, L., Di Puccio, F.: Frictionless vs. frictional contact in numerical wear predictions of conformal and non-conformal sliding couplings. Tribol. Lett. 70, 1–10 (2022). https://doi.org/10.1007/s11249-022-01657-510.1007/s11249-022-01657-5 ↗
27. Mattei, L., Di Puccio, F., Piccigallo, B., Ciulli, E.: Lubrication and wear modelling of artificial hip joints: A review. Tribol. Int. 44, 532–549 (2011). https://doi.org/10.1016/j.triboint.2010.06.01010.1016/j.triboint.2010.06.010 ↗
28. Meguid, S.A., Czekanski, A.: Advances in computational contact mechanics. Int. J. Mech. Mater. des. 4, 419–443 (2008). https://doi.org/10.1007/s10999-008-9077-z10.1007/s10999-008-9077-z ↗
29. Meng, Q., Liu, F., Fisher, J., Jin, Z.: Contact mechanics and lubrication analyses of ceramic-on-metal total hip replacements. Tribol. Int. 63, 51–60 (2013). https://doi.org/10.1016/j.triboint.2012.02.01210.1016/j.triboint.2012.02.012 ↗
30. Merola, M., Affatato, S.: Materials for hip prostheses: a review of wear and loading considerations. Materials (Basel) (2019). https://doi.org/10.3390/ma1203049510.3390/ma12030495 ↗
31. Ming Song, S.T., Ashkanfar, A., English, R., Rothwell, G.: Computational method for bearing surface wear prediction in total hip replacements. J. Mech. Behav. Biomed. Mater. (2021). https://doi.org/10.1016/j.jmbbm.2021.10450710.1016/j.jmbbm.2021.104507 ↗
32. Nitish Prasad, K., Ramkumar, P.: FEM wear prediction of ceramic hip replacement bearings under dynamic edge loading conditions. J. Mech. Behav. Biomed. Mater. 146, 106049 (2023). https://doi.org/10.1016/j.jmbbm.2023.10604910.1016/j.jmbbm.2023.106049 ↗
33. Prasad, K.N., Ramkumar, P.: Effect of geometrical, operational and material parameters in the lubrication regime of hard-on-hard hip implants. Mater. Chem. Phys. 317, 1–31 (2024). https://doi.org/10.1016/j.matchemphys.2024.12917110.1016/j.matchemphys.2024.129171 ↗
34. Di Puccio, F., Mattei, L.: Biotribology of artificial hip joints. World J. Orthop. 6, 77–94 (2015). https://doi.org/10.5312/wjo.v6.i1.7710.5312/wjo.v6.i1.77 ↗
35. Sonntag, R., Reinders, J., Rieger, J.S., Heitzmann, D.W.W., Kretzer, J.P.: Hard-on-hard lubrication in the artificial hip under dynamic loading conditions. PLoS ONE. 8, 1–8 (2013). https://doi.org/10.1371/journal.pone.007162210.1371/journal.pone.0071622 ↗
36. Ruggiero, A., Merola, M., Affatato, S.: Finite element simulations of hard-on-soft hip joint prosthesis accounting for dynamic loads calculated from a musculoskeletal model during walking. Materials (Basel). (2018). https://doi.org/10.3390/ma1104057410.3390/ma11040574 ↗
37. Sarrazin, J., Halbaut, M., Martinot, P., Putman, S., Migaud, H., Girard, J.: Are CPR (contact patch to rim) distance anomalies associated with the occurrence of abnormal noises from ceramic-on-ceramic THA? Orthop. Traumatol. Surg. Res. 109, 103438 (2023). https://doi.org/10.1016/j.otsr.2022.10343810.1016/j.otsr.2022.103438 ↗
38. Shankar, S., Prakash, L., Kalayarasan, M.: Finite element analysis of different contact bearing couples for human hip prosthesis. Int. J. Biomed. Eng. Technol. 11, 66–80 (2013). https://doi.org/10.1504/IJBET.2013.05371210.1504/IJBET.2013.053712 ↗
39. Shankar, S., Siddarth, R., Nithyaprakash, R., Uddin, M.S.: Wear prediction of hard carbon coated hard-on-hard hip implants using finite element method. Int. J. Comput. Aided Eng. Technol. 10(4), 440–456 (2018)10.1504/IJCAET.2018.10012356 ↗
40. Shen, G., Fang, F., Kang, C.: Nanotechnology and precision engineering tribological performance of bioimplants: a comprehensive review. Nanotechnol. Precis. Eng. 1, 107–122 (2018). https://doi.org/10.13494/j.npe.2018000310.13494/j.npe.20180003 ↗
41. Sun, Z., Hao, C.: Conformal contact problems of ball-socket and ball. Phys. Procedia 25, 209–214 (2012). https://doi.org/10.1016/j.phpro.2012.03.07310.1016/j.phpro.2012.03.073 ↗
42. Toh, S.M.S., Ashkanfar, A., English, R., Rothwell, G., Langton, D.J., Joyce, T.J.: How does bicycling affect the longevity of Total Hip Arthroplasty? A finite element wear analysis. J. Mech. Behav. Biomed. Mater. 139, 105673 (2023). https://doi.org/10.1016/j.jmbbm.2023.10567310.1016/j.jmbbm.2023.105673 ↗
43. Uddin, M.S., Zhang, L.C.: Predicting the wear of hard-on-hard hip joint prostheses. Wear 301, 192–200 (2013). https://doi.org/10.1016/j.wear.2013.01.00910.1016/j.wear.2013.01.009 ↗
44. Underwood, R.J., Zografos, A., Sayles, R.S., Hart, A., Cann, P.: Edge loading in metal-on-metal hips: low clearance is a new riskfactor. Proc. Inst. Mech. Eng. H 226, 217 (2012). https://doi.org/10.1177/095441191143139710.1177/0954411911431397 ↗
45. Venkatesh Raja, K., Malayalamurthi, R.: Assessment on assorted hyper-elastic material models applied for large deformation soft finger contact problems. Int. J. Mech. Mater. des. 7, 299–305 (2011). https://doi.org/10.1007/s10999-011-9167-110.1007/s10999-011-9167-1 ↗
46. Viitala, R., Saikko, V.: Effect of random variation of input and various daily activities on wear in a hip joint simulator. J. Biomech. 106, 109831 (2020). https://doi.org/10.1016/j.jbiomech.2020.10983110.1016/j.jbiomech.2020.109831 ↗
47. Wang, F.C., Liu, F., Jin, Z.M.: A general elastohydrodynamic lubrication analysis of artificial hip joints employing a compliant layered socket under steady state rotation. Proc. Inst. Mech. Eng. Part H J. Eng. Med. 218, 283–291 (2004). https://doi.org/10.1243/095441104193283610.1243/0954411041932836 ↗
48. Yu, Z., Zhang, L.: Design of low wear artificial hip joint considering 3D physiological loading and motion. Wear (2023). https://doi.org/10.1016/J.WEAR.2023.20474410.1016/J.WEAR.2023.204744 ↗
49. Zhu, A., He, S., Zhao, J., Luo, W.: A nonlinear contact pressure distribution model for wear calculation of planar revolute joint with clearance. Nonlinear Dyn. 88, 315–328 (2017). https://doi.org/10.1007/s11071-016-3244-910.1007/s11071-016-3244-9 ↗