The effect of LPBF scanning angles on the forming quality, wear resistance, and corrosion resistance of the molten layer in CuSn12Ni2 wind turbine bearing bushings
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Yin J, Meng X, Cheng S (2025) Failure modeling and multidimensional optimization of gearbox journal bearings to prevent wear failures and reduce friction in wind turbines. Eng Fail Anal 109748. https://doi.org/10.1016/j.engfailanal.2025.10974810.1016/j.engfailanal.2025.109748 ↗
2. Fei W, Tan J et al (2024) Influences of planet gear journal bearing on dynamic characteristics of megawatt-scale wind turbine drivetrains: simulations and experiments. Mech Syst Signal Process 221:111747. https://doi.org/10.1016/J.YMSSP.2024.11174710.1016/J.YMSSP.2024.111747 ↗
3. Fei WJ, Tan JJ, Zhu CC et al (2025) Effect of planetary gear sliding bearings on vibration characteristics of wind turbine transmission chains. Acta Energiae Solaris Sinica 46(6):645–658. https://doi.org/10.19912/j.0254-0096.tynxb.2024-019610.19912/j.0254-0096.tynxb.2024-0196 ↗
4. Zhou C, Wang R et al (2025) Joint modeling of planetary gear train and bearings of wind turbines for vibration analysis of planetary bearing outer ring looseness fault. Energies 18(22):5938. https://doi.org/10.3390/EN1822593810.3390/EN18225938 ↗
5. Xu HC, Bo HY et al (2023) Dynamic characteristics of a planetary gear-roller bearing coupled system in wind turbine units. Acta Energiae Solaris Sinica 44(8):477–484. https://doi.org/10.19912/j.0254-0096.tynxb.2022-063810.19912/j.0254-0096.tynxb.2022-0638 ↗
6. Yin J, Meng X et al (2024) Tribo-dynamics modeling and analysis of planetary gear bearing systems in wind turbines considering sun-planetary-ring helical gear mesh and elastic deformation effects[J]. Tribol Int 200:110059. https://doi.org/10.1016/j.triboint.2024.11005910.1016/j.triboint.2024.110059 ↗
7. Li H, Tan J et al (2025) Collaborative optimization of meshing and lubrication for planetary gear-journal bearing integrated structure in high power density wind turbine drivetrains. Renew Energy 255:123763. https://doi.org/10.1016/J.RENENE.2025.12376310.1016/J.RENENE.2025.123763 ↗
8. Li H, Zhu CC et al (2024) Research status and development trends of sliding bearings for wind turbine applications. Acta Energiae Solaris Sinica 45(5):77–85. https://doi.org/10.19912/j.0254-0096.tynxb.2023-004510.19912/j.0254-0096.tynxb.2023-0045 ↗
9. Liu W, Wei L et al (2025) Investigation of tribological behavior and failure mechanisms of PEEK-based composites, Babbitt alloy, and CuSn10Pb10 bimetal for wind turbine main shaft sliding bearings under simulated operational conditions. Tribol Int 204:110522. https://doi.org/10.1016/J.TRIBOINT.2025.11052210.1016/J.TRIBOINT.2025.110522 ↗
10. Zhao SK, Su H. (2023). Lubrication performance analysis of radial sliding bearings in low-speed heavy-load wind turbine gearboxes under multiple operating conditions. J Northwest Polytechnical Univ 41(5):978–98610.1051/jnwpu/20234150978 ↗
11. He WH, Guo TH et al (2025) Electrochemical behavior of 42CrMo bearing steel for offshore wind power applications. Corros Prot 46(4):9–15
12. Hu YN, Yu H et al (2024) Research progress and challenges in predicting mechanical properties of additively manufactured alloys using machine learning. Chin J Theoretical Appl Mech 56(7):1892–1915
13. Stopyra W, Gruber K et al (2020) Laser powder bed fusion of AA7075 alloy: influence of process parameters on porosity and hot cracking. Addit Manuf 35(prepublish) https://doi.org/10.1016/j.addma.2020.10127010.1016/j.addma.2020.101270 ↗
14. Guo X, Yang Y et al (2024) Effect of forming strategies on the microstructure and mechanical properties of thin-walled CuCrZr alloy fabricated by selective laser melting. J Alloys Compd 1005:176233. https://doi.org/10.1016/J.JALLCOM.2024.17623310.1016/J.JALLCOM.2024.176233 ↗
15. Chen SY, Du DF et al (2026) Influence of process parameters on microstructural defects and microstructure of K418B superalloy fabricated by laser powder bed fusion. J Aeronaut Mater (1):70–78 https://link.cnki.net/urlid/11.3159.V.20260107.1657.022
16. Mao LY (2023) Influence of scanning strategies on microstructure and properties of SLM-fabricated 316L stainless steel (Master’s thesis). South China University of Technology. https://doi.org/10.27151/d.cnki.ghnlu.2023.00088610.27151/d.cnki.ghnlu.2023.000886 ↗
17. Li RB (2024) Investigation on thermal stress evolution and deformation mechanisms in multi-laser powder bed fusion overlapping regions (Doctoral dissertation). Chongqing University. https://doi.org/10.27670/d.cnki.gcqdu.2024.00478510.27670/d.cnki.gcqdu.2024.004785 ↗
18. Tulika DPK, S et al (2021) Effect of powder layer thickness and scan orientation on the deformation and failure of selectively laser melted Ti-6Al-4V alloy over six decades of strain rates. Mater Sci Eng A 822. https://doi.org/10.1016/J.MSEA.2021.14165610.1016/J.MSEA.2021.141656 ↗
19. Qiao Z, Kaiwen W et al (2023) Effect of rotation angle on surface morphology, microstructure, and mechanical properties of inconel 718 alloy fabricated by high power laser powder bed fusion. J Mater Sci Technol 154:30–42. https://doi.org/10.1016/J.JMST.2023.01.02110.1016/J.JMST.2023.01.021 ↗
20. Leicht A, Yu C et al (2020) Effect of scan rotation on the microstructure development and mechanical properties of 316L parts produced by laser powder bed fusion. Mater Charact 163 https://doi.org/10.1016/j.matchar.2020.11030910.1016/j.matchar.2020.110309 ↗
21. Ramit VSHK (2024) Effect of laser scan rotation on the microstructure and mechanical properties of laser powder bed fused Haynes 282. Materialia 33:101992. https://doi.org/10.1016/J.MTLA.2023.10199210.1016/J.MTLA.2023.101992 ↗
22. Zong XW, Wang L et al (2021) Effect of laser scanning angle on microstructure and properties of SLM-fabricated 316L stainless steel. Appl Laser 41(3):421–430. https://doi.org/10.14128/j.cnki.al.20214103.42110.14128/j.cnki.al.20214103.421 ↗
23. Robinson HJ, Ashton TRI et al (2019) The effect of hatch angle rotation on parts manufactured using selective laser melting. Rapid Prototyp J 25(2):289–298. https://doi.org/10.1108/rpj-06-2017-011110.1108/rpj-06-2017-0111 ↗
24. Itziar S, Alexander U et al (2021) Scanning manufacturing parameters determining the residual stress state in LPBF IN718 small Parts. Adv Eng Mater 23(7). https://doi.org/10.1002/ADEM.20210015810.1002/ADEM.202100158 ↗
25. Yu C, Zhang P et al (2020) Microstructure and fatigue behavior of laser-powder bed fusion austenitic stainless steel. J Mater Sci Technol 46:191–200. https://doi.org/10.1016/j.jmst.2019.08.04710.1016/j.jmst.2019.08.047 ↗
26. Dowling L, Kennedy J, Trimble D (2022) Effect of a modified energy density equation to achieve a more uniform energy input during LPBF for improved repeatability[J]. J Manuf Process 77:607–615. https://doi.org/10.1016/j.jmapro.2022.03.04510.1016/j.jmapro.2022.03.045 ↗
27. Zhou H, Cui Q et al (2026) Study on the Lnfluence of surface microtextures on the tribological properties of sliding bearings under complex operating Conditions. J Bio- Tribo-Corros 12(1):39. https://doi.org/10.1007/S40735-025-01098-210.1007/S40735-025-01098-2 ↗
28. Chunxing G, Li D, Di Z (2023) Research on Start-Stop performance of journal bearing based on an isothermal and mixed lubrication model with different acceleration and deceleration forms in Consideration. J Tribol 145(5). https://doi.org/10.1115/1.405651710.1115/1.4056517 ↗
29. Guo H, Qin LC et al (2023) Influence of coupled factors on the performance of mixed-lubrication sliding bearings. J South China Univ Technol (Natural Sci Edition) 51(5):141–150
30. Michael M, Michael P et al (2022) Validation of statistic and deterministic asperity contact models using experimental Stribeck data. Tribol Int 165. https://doi.org/10.1016/J.TRIBOINT.2021.10732910.1016/J.TRIBOINT.2021.107329 ↗
31. Wang M, Sun TW et al (2021) Calculation of non-Hertzian contact stress in high-speed ball screw pairs. Adv Eng Sci 53(2):178–186. https://doi.org/10.15961/j.jsuese.20200044310.15961/j.jsuese.202000443 ↗
32. Aamir SF, Ankush R et al (2022) Corrosion behaviour of engineering materials: a review of mitigation methodologies for different environments. J Inst Eng 103(2):639–661. https://doi.org/10.1007/S40033-022-00367-510.1007/S40033-022-00367-5 ↗
33. National Technical Committee on Steel Standardization of China (SAC/TC 183) (2018) Corrosion of metals and alloys — Alternate immersion test in salt solution: GB/T 19746–2018 [S]. Standards Press of China, Beijing
34. Daniel B, Paul P et al (2022) A critical assessment of the Archimedes density method for thin-wall specimens in laser powder bed fusion: measurement capability, process sensitivity and property correlation. J Manuf Process 79:185–192. https://doi.org/10.1016/J.JMAPRO.2022.04.05910.1016/J.JMAPRO.2022.04.059 ↗
35. Yuan MX, Kou TY et al Effect of pulsed laser SLM process parameters on the forming quality of titanium alloys. Surf Technol 52(11):430–438. https://doi.org/10.16490/j.cnki.issn.1001-3660.2023.11.03710.16490/j.cnki.issn.1001-3660.2023.11.037 ↗
36. Erlei L, Zongyan Z, Lin W et al (2022) Particle scale modelling of melt pool dynamics and pore formation in selective laser melting additive manufacturing. Powder Technol 397. https://doi.org/10.1016/J.POWTEC.2021.11.05610.1016/J.POWTEC.2021.11.056 ↗
37. Zhang C, Li CY et al (2025) Optimization of process parameters for laser powder bed fusion of nickel-titanium alloys. Appl Laser 45(6):20–32. https://doi.org/10.14128/j.cnki.al.20254506.02010.14128/j.cnki.al.20254506.020 ↗
38. Snell R, Tammas-Williams S et al (2020) Methods for rapid pore classification in metal additive manufacturing. JOM 72(1):101–109. https://doi.org/10.1007/s11837-019-03761-910.1007/s11837-019-03761-9 ↗
39. Wang L, Feng S et al (2025) The effect of porosity on the fatigue crack growth behavior of selective laser melted TA15 titanium alloy. Eng Fail Anal 170:109305. https://doi.org/10.1016/J.ENGFAILANAL.2025.10930510.1016/J.ENGFAILANAL.2025.109305 ↗
40. Chen S, Tao FH et al (2022) Effect of build orientation on microstructure and properties of selective laser melted 4Cr5MoSiV1 steel. J Mater Eng 50(3):122–130
41. Vinothraj UT, Xavior MA (2024) Wear and frictional behaviour of additive manufactured SS 316L through powder bed fusion. J Appl Sci Eng 27(12):3601–3612
42. Vinothraj U, Xavior AM (2025) Effect of heat treatment on tribological properties of AISI 316L manufactured through selective laser melting. J Mater Res Technol 35:7180–7192. https://doi.org/10.1016/J.JMRT.2025.03.02410.1016/J.JMRT.2025.03.024 ↗
43. Wen SZ, Huang P et al (2018) Principles of tribology, 5th edn. Tsinghua University, Beijing, pp 274–278
44. Zu H, He Z et al (2023) Effect of metallic coatings on the wear performance and mechanism of 30CrMnSiNi2A steel. Materials 16(18). https://doi.org/10.3390/MA1618619110.3390/MA16186191 ↗
45. Jia B, Wan Q et al (2024) Tribological properties and machine learning prediction of fecocrnialn high entropy coatings. Surf Coat Technol 477:130341. https://doi.org/10.1016/J.SURFCOAT.2023.13034110.1016/J.SURFCOAT.2023.130341 ↗
46. Sun HR, Cui QW et al (2025) Effect of tic content on the wear performance of IN718 melted layers. Laser Optoelectron Progress 62(21):296–305. https://doi.org/10.3788/lop25047910.3788/lop250479 ↗
47. Hansong J, Qinghua S et al (2022) Evaluation and prediction of pore effects on single-crystal mechanical and damage properties of selective laser melted Inconel-718. Mater Des 219. https://doi.org/10.1016/J.MATDES.2022.11080710.1016/J.MATDES.2022.110807 ↗
48. Naiyu L, Jianguo G et al (2022) Improvement in corrosion resistance of micro-arc oxidation coating on PVD Ti‐coated aluminum alloy 7075. Int J Appl Ceramic Technol 19(5):2556–2565. https://doi.org/10.1111/IJAC.1406610.1111/IJAC.14066 ↗
49. Bilesan RM, Yazdani M, Luneau M et al (2023) Electrochemical approach for advanced flow reactors via additive manufacturing of high surface area Ti-6Al‐4V anode. ChemElectroChem 10(20) https://doi.org/10.1002/CELC.20230031910.1002/CELC.202300319 ↗
50. Meng YC, Chu YR et al (2025) Tribological and electrochemical properties of laser-clad CoCrNi-based medium–high entropy alloys. Rare Metal Mater Eng 54(4):983–992
51. Chen TX, Liao JJ et al (2025) Effect of dissolved hydrogen on the in-situ high-temperature water corrosion behavior of N36 zirconium alloy. At Energy Sci Technol 59(S2):379–388