Numerical simulation of material flow in AA7075 during constrained friction processing
Source abstract
Abstract
Abstract Lightweight aluminum alloys, such as AA7075, are desirable for applications in various industries, but their limited formability and workability often pose significant challenges. Constrained Friction Processing (CFP) has emerged as a promising technique to address these challenges by refining microstructures through the relative motion between two tools and the workpiece. The process involves axial extrusion, dual tool rotation, and constraint of the extrudate to control material flow and enhance microstructural refinement. CFP is particularly attractive for high-strength AA7075 as it imposes constrained material flow and increased shear deformation, overcoming the limited formability observed in existing conventional extrusion processes. This study investigates CFP using both experimental and numerical methods, establishing correlations between process conditions, material flow, microstructural evolution, and hardness for the aluminum alloy AA7075. The process was investigated at rotational speeds of 1000–1400 rpm, resulting in the highest measured peak temperature up to 445°C and refined grain sizes of 2–3 µm. The results show that initial shear deformation and material flow under the rotating tools are redistributed during processing, leading to helical flow behavior in the extruded rod. The refined stir zone (SZ) exhibited increase in hardness, about 25% compared to the base material. The developed finite-element model demonstrates good agreement with experimental results with respect to the complete thermal cycle, spatial temperature distribution, and material flow patterns, providing insight into the microstructural evolution during CFP of aluminium alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Advanced Welding Techniques Analysis · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Haghshenas M, Gerlich A (2018) Joining of automotive sheet materials by friction-based welding methods: A review. Eng Sci Technol Int J 21(1):130–148. https://doi.org/10.1016/j.jestch.2018.02.00810.1016/j.jestch.2018.02.008 ↗
2. Baghdadchi A, Patel V, Li W, Yang X, Andersson J (2023) Ductilization and grain refinement of AA7075-T651 alloy via stationary shoulder friction stir processing. J Market Res 27:5360–5367. https://doi.org/10.1016/j.jmrt.2023.11.04110.1016/j.jmrt.2023.11.041 ↗
3. Shen Z, Ding Y, Gerlich AP (2020) Advances in friction stir spot welding. Crit Rev Solid State Mater Sci 45(6):457–534. https://doi.org/10.1080/10408436.2019.167179910.1080/10408436.2019.1671799 ↗
4. Chen G, Zhang S, Zhu Y, Yang C, Shi Qy (2019) Thermo-mechanical analysis of friction stir welding: A review on recent advances. Acta Metallurgica Sinica (English Letters). https://doi.org/10.1007/s40195-019-00942-y10.1007/s40195-019-00942-y ↗
5. Tang J, Wang J, Teng J, Wang G, Fu D, Zhang H, Jiang F (2021) Effect of zn content on the dynamic softening of Al–Zn–Mg–Cu alloys during hot compression deformation. Vacuum 184:109941. https://doi.org/10.1016/j.vacuum.2020.10994110.1016/j.vacuum.2020.109941 ↗
6. Zhang H, Li L, Yuan D, Peng D (2007) Hot deformation behavior of the new Al-Mg-Si-Cu aluminum alloy during compression at elevated temperatures. Mater Charact 58(2):168–173. https://doi.org/10.1016/j.matchar.2006.04.01210.1016/j.matchar.2006.04.012 ↗
7. Cao F, Zheng J, Jiang Y, Chen B, Wang Y, Hu T (2019) Experimental and DFT characterization of $$\eta \prime $$ nano-phase and its interfaces in Al-Zn-Mg-Cu alloys. Acta Mater 164:207–219. https://doi.org/10.1016/j.actamat.2018.10.04510.1016/j.actamat.2018.10.045 ↗
8. Liu D, Xiong B, Bian F, Li Z, Li X, Zhang Y, Wang Q, Xie G, Wang F, Liu H (2015) Quantitative study of nanoscale precipitates in Al–Zn–Mg–Cu alloys with different chemical compositions. Mater Sci Eng, A 639:245–251. https://doi.org/10.1016/j.msea.2015.04.10410.1016/j.msea.2015.04.104 ↗
9. Zang R, Ding L, Ehlers FJ, Jia Z, Xu S, Li Y, Cao L (2023) The influence of Cu content and Mg/Si ratio on the strength and formability in Al-Mg-Si-Cu alloys. Mater Charact 205:113355. https://doi.org/10.1016/j.matchar.2023.11335510.1016/j.matchar.2023.113355 ↗
10. Zhang S, Kontsevoi OY, Freeman AJ, Olson GB (2011) First principles investigation of zinc-induced embrittlement in an aluminum grain boundary. Acta Mater 59(15):6155–6167. https://doi.org/10.1016/j.actamat.2011.06.02810.1016/j.actamat.2011.06.028 ↗
11. Xiao G, Jiang J, Liu Y, Wang Y, Guo B (2019) Recrystallization and microstructure evolution of hot extruded 7075 aluminum alloy during semi-solid isothermal treatment. Mater Charact 156:109874. https://doi.org/10.1016/j.matchar.2019.10987410.1016/j.matchar.2019.109874 ↗
12. Li Z, Chen L, Tang J, Sun W, Zhao G, Zhang C (2021) Improving mechanical anisotropy and corrosion resistance of extruded AA7075 alloy by warm cross rolling and annealing. J Alloy Compd 863:158725. https://doi.org/10.1016/j.jallcom.2021.15872510.1016/j.jallcom.2021.158725 ↗
13. Elibol C, Sagir K, Dogan M (2024) Effect of equal-channel angular pressing on microstructure, aging kinetics and impact behavior in a 7075 aluminum alloy. Mater Today Commun 39:108931. https://doi.org/10.1016/j.mtcomm.2024.10893110.1016/j.mtcomm.2024.108931 ↗
14. de Castro CC, Shen J, dos Santos JF, Klusemann B (2023) Microstructural development of as-cast AM50 during constrained friction processing: Grain refinement and influence of process parameters. J Mater Process Technol 318:0–118018. https://doi.org/10.1016/j.jmatprotec.2023.11801810.1016/j.jmatprotec.2023.118018 ↗
15. Schilling C, dos Santos J (2004) Method and device for joining at least two adjoining work pieces by friction welding. U.S. Patent pp 6,722–556
16. Baffari D, Buffa G, Fratini L (2017) A numerical model for wire integrity prediction in friction stir extrusion of magnesium alloys. J Mater Process Technol 247:1–10. https://doi.org/10.1016/j.jmatprotec.2017.04.00710.1016/j.jmatprotec.2017.04.007 ↗
17. Chen T, Fu B, Shen J, Suhuddin UF, Wiese B, Huang Y, Wang M, dos Santos JF, Bergmann JP, Klusemann B (2023) Application of novel constrained friction processing method to produce fine grained biomedical Mg-Zn-Ca alloy. J Magnes Alloys. https://doi.org/10.1016/j.jma.2023.10.00710.1016/j.jma.2023.10.007 ↗
18. de Castro CC, Neves AM, Klusemann B (2024) Effect of thermo-mechanical conditions during constrained friction processing on the particle refinement of AM50 Mg-alloy phases. J Magnes Alloys 12(6):2298–2311. https://doi.org/10.1016/j.jma.2024.04.00210.1016/j.jma.2024.04.002 ↗
19. Zhang H, Zhao X, Deng X, Sutton M, Reynolds A, McNeill S, Ke X (2014) Investigation of material flow during friction extrusion process. Int J Mech Sci 85:130–141. https://doi.org/10.1016/j.ijmecsci.2014.05.01110.1016/j.ijmecsci.2014.05.011 ↗
20. Li L, Reza-E-Rabby M, Overman N, Wang T, Whalen S, Grant G, Mathaudhu S, Soulami A (2022) Analysis of contact conditions and microstructure evolution in shear assisted processing and extrusion using smoothed particle hydrodynamics method. Mater Des 221:111010. https://doi.org/10.1016/j.matdes.2022.11101010.1016/j.matdes.2022.111010 ↗
21. Baffari D, Buffa G, Campanella D, Fratini L, Reynolds AP (2017) Process mechanics in friction stir extrusion of magnesium alloys chips through experiments and numerical simulation. J Manuf Process 29:41–49. https://doi.org/10.1016/j.jmapro.2017.07.01010.1016/j.jmapro.2017.07.010 ↗
22. Alewi D, Murdoch H, Magagnosc D, Lemmen K, Karaca H, Rottmann P (2024) Depth-dependent microstructure and mechanical properties of hot rolled AA7075. Mater Sci Eng, A 892:146056. https://doi.org/10.1016/j.msea.2023.14605610.1016/j.msea.2023.146056 ↗
23. Bodunrin MO (2020) Flow stress prediction using hyperbolic-sine arrhenius constants optimised by simple generalised reduced gradient refinement. J Market Res 9(2):2376–2386. https://doi.org/10.1016/j.jmrt.2019.12.07010.1016/j.jmrt.2019.12.070 ↗
24. Asadi P, Mahdavinejad R, Tutunchilar S (2011) Simulation and experimental investigation of FSP of AZ91 magnesium alloy. Mater Sci Eng, A 528(21):6469–6477. https://doi.org/10.1016/j.msea.2011.05.03510.1016/j.msea.2011.05.035 ↗
25. Garg A, Bhattacharya A (2017) On lap shear strength of friction stir spot welded AA6061 alloy. J Manuf Process 26:203–215. https://doi.org/10.1016/j.jmapro.2017.02.01910.1016/j.jmapro.2017.02.019 ↗
26. Jain R, Pal S, Singh S (2018) Thermomechanical Simulation of Friction Stir Welding Process Using Lagrangian Method, pp 103–146. https://doi.org/10.1007/978-981-10-8518-5_410.1007/978-981-10-8518-5_4 ↗
27. Jain R, Pal SK, Singh SB (2016) A study on the variation of forces and temperature in a friction stir welding process: A finite element approach. J Manuf Process 23:278–286. https://doi.org/10.1016/j.jmapro.2016.04.00810.1016/j.jmapro.2016.04.008 ↗
28. Wang L, Yang H (2012) Friction in aluminium extrusion—part 2: A review of friction models for aluminium extrusion. Tribol Int 56:99–106. https://doi.org/10.1016/j.triboint.2012.06.00610.1016/j.triboint.2012.06.006 ↗
29. Rokni M, Zarei-Hanzaki A, Roostaei AA, Abolhasani A (2011) Constitutive base analysis of a 7075 aluminum alloy during hot compression testing. Mater Des 32(10):4955–4960. https://doi.org/10.1016/j.matdes.2011.05.04010.1016/j.matdes.2011.05.040 ↗
30. Trimble D, O’Donnell G (2015) Constitutive modelling for elevated temperature flow behaviour of AA7075. Mater Des 76:150–168. https://doi.org/10.1016/j.matdes.2015.03.06210.1016/j.matdes.2015.03.062 ↗
31. Buffa G, Hua J, Shivpuri R, Fratini L (2006) A continuum based FEM model for friction stir welding—model development. Mater Sci Eng, A 419(1):389–396. https://doi.org/10.1016/j.msea.2005.09.04010.1016/j.msea.2005.09.040 ↗
32. Dalai B, Moretti MA, Åkerström P, Arvieu C, Jacquin D, Lindgren LE (2021) Mechanical behavior and microstructure evolution during deformation of AA7075-T651. Mater Sci Eng, A 822:141615. https://doi.org/10.1016/j.msea.2021.14161510.1016/j.msea.2021.141615 ↗
33. Chen S, Li D, Zhang S, Han H, Lee H, Lee M (2020) Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach. Int J Plast 131:102710. https://doi.org/10.1016/j.ijplas.2020.10271010.1016/j.ijplas.2020.102710 ↗
34. Jiang S, Lv J, Shi Z, Lin J (2024) A study of dynamic recovery and recrystallisation mechanisms in aluminium alloy AA7050 at different thermomechanical processing conditions. Mater Sci Eng, A 914:147117. https://doi.org/10.1016/j.msea.2024.14711710.1016/j.msea.2024.147117 ↗
35. Lezaack MB, Simar A (2021) Avoiding abnormal grain growth in thick 7xxx aluminium alloy friction stir welds during T6 post heat treatments. Mater Sci Eng, A 807:140901. https://doi.org/10.1016/j.msea.2021.14090110.1016/j.msea.2021.140901 ↗
36. Jadot M, Li J, Gautier R, Xie J, Lezaack MB, Sapanathan T, Rachik M, Simar A (2025) Analysis of grain structure, precipitation and hardness heterogeneities, supported by a thermal model, for an aluminium alloy 7075 deposited by solid-state multi-layer friction surfacing. J Mater Process Technol 335:118661. https://doi.org/10.1016/j.jmatprotec.2024.11866110.1016/j.jmatprotec.2024.118661 ↗