Influence of initial deformation on microstructural and textural evolution of pure copper under severe plastic deformation
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Levitas VI (2025) Steady States in severe plastic deformations and microstructure at normal and high pressure. J Mater Res Technol 36:382–397. https://doi.org/10.1016/j.jmrt.2025.03.06010.1016/j.jmrt.2025.03.060 ↗
2. Tajdary P, Morin L, Braham C, Novelo Peralta O, Gonzalez G (2024) On the strength-ductility modifications in pure copper after severe plastic deformation. Mech Mater 195:105028. https://doi.org/10.1016/J.MECHMAT.2024.10502810.1016/J.MECHMAT.2024.105028 ↗
3. Akbarzadeh B, Gorji H, Bakhshi-Jooybari M, Jamaati R, Mirnia MJ (2021) Investigation of mechanical and microstructural properties of pure copper processed by combined extrusion-equal channel angular pressing (C-Ex-ECAP). Int J Adv Manuf Technol 113:2175–2191. https://doi.org/10.1007/S00170-021-06692-5/10.1007/S00170-021-06692-5/ ↗
4. Öğüt S, Kaya H, Kentli A, Uçar M (2021) Applying hybrid equal channel angular pressing (HECAP) to pure copper using optimized Exp.-ECAP die. Int J Adv Manuf Technol 116:3859–3876. https://doi.org/10.1007/S00170-021-07717-910.1007/S00170-021-07717-9 ↗
5. Verma S, Kamalakshi G, Gururajan MP, Pant P (2023) Misorientation development at Σ3 boundaries in pure copper: experiments and MD simulations. Metall Mater Trans Phys Metall Mater Sci 54:2656–2669. https://doi.org/10.1007/S11661-023-07045-510.1007/S11661-023-07045-5 ↗
6. Wang K, Zhang WG, Xu JQ, Dan WJ (2022) The impact of misorientation on the grain boundary energy in bi-crystal copper: an atomistic simulation study. J Mol Model 28:1–12. https://doi.org/10.1007/S00894-022-05037-710.1007/S00894-022-05037-7 ↗
7. Aghamiri SMS, Zhang SH, Ukai S, Oono N, Kasada R, Noto H, Hishinuma Y, Muroga T (2020) Microstructure development in cryogenically rolled oxide dispersion strengthened copper. Mater (Oxf) 9:100520. https://doi.org/10.1016/J.MTLA.2019.10052010.1016/J.MTLA.2019.100520 ↗
8. Zhu J, Xiao J, Zhou Q, Aghababaei R (2024) Effect of grain boundary on scratch behavior of polycrystalline copper. Int J Mech Sci 272:109175. https://doi.org/10.1016/J.IJMECSCI.2024.10917510.1016/J.IJMECSCI.2024.109175 ↗
9. Zhao K, Gao T, Yang H, Hu K, Liu G, Sun Q, Nie J, Liu X (2021) Enhanced grain refinement and mechanical properties of a high–strength Al–Zn–Mg–Cu–Zr alloy induced by TiC nano–particles. Mater Sci Eng A 806:140852. https://doi.org/10.1016/J.MSEA.2021.14085210.1016/J.MSEA.2021.140852 ↗
10. Ren L, Zhang S, Shi J, Shen Z, Shi P, Zheng T, Ding B, Guo Y, Xiao Q, Li Q, Zhong Y (2022) Grain refinement and mechanical properties enhancement of Cu-10 wt%Fe alloys via Zr addition. Mater Sci Eng A 846:143309. https://doi.org/10.1016/J.MSEA.2022.14330910.1016/J.MSEA.2022.143309 ↗
11. Zhai W, Zhou W, Nai SML (2022) Grain refinement and strengthening of 316L stainless steel through addition of TiC nanoparticles and selective laser melting. Mater Sci Eng A 832:142460. https://doi.org/10.1016/J.MSEA.2021.14246010.1016/J.MSEA.2021.142460 ↗
12. Bohne B, Fritsch S, Kollender J, Wagner MFX (2024) Grain size hardening versus texture softening: mechanical anisotropy of an AZ31B magnesium alloy processed by equal-channel angular pressing. J Mater Res Technol 33:9144–9154. https://doi.org/10.1016/j.jmrt.2024.11.19310.1016/j.jmrt.2024.11.193 ↗
13. Baik SC, Estrin Y, Hellmig RJ, Jeong HT, Brokmeier HG, Kime HS (2003) Modeling of texture evolution in copper under equal channel angular pressing. Int J Mater Res 94:1189–1198. https://doi.org/10.1515/IJMR-2003-021710.1515/IJMR-2003-0217 ↗
14. Ma M, Li Z, Qiu W, Xiao Z, Zhao Z, Jiang Y (2019) Microstructure and properties of Cu–Mg-Ca alloy processed by equal channel angular pressing. J Alloys Compd 788:50–60. https://doi.org/10.1016/J.JALLCOM.2019.01.33510.1016/J.JALLCOM.2019.01.335 ↗
15. Kumar S, Tutcuoglu AD, Hollenweger Y, Kochmann DM (2020) A meshless multiscale approach to modeling severe plastic deformation of metals: application to ECAE of pure copper. Comput Mater Sci. https://doi.org/10.1016/j.commatsci.2019.10932910.1016/j.commatsci.2019.109329 ↗
16. Verma S, Pandey A, Dalal S, Srivastava M, Raman R (2023) X-ray pole figure analysis for orienting TGSM grown bulk ZnTe crystal for Terahertz device applications. J Mater Sci Mater Electron 34:1–10. https://doi.org/10.1007/S10854-023-10230-210.1007/S10854-023-10230-2 ↗
17. Zolotorevsky NY, Rybin VV, Matvienko AN, Ushanova EA, Philippov SA (2019) Misorientation angle distribution of deformation-induced boundaries provided by their EBSD-based separation from original grain boundaries: case study of copper deformed by compression. Mater Charact 147:184–192. https://doi.org/10.1016/J.MATCHAR.2018.11.00310.1016/J.MATCHAR.2018.11.003 ↗
18. Kumaran SN, Sahoo SK, Haase C, Barrales-Mora LA, Toth LS (2023) Nano-structuring of a high entropy alloy by severe plastic deformation: experiments and crystal plasticity simulations. Acta Mater. https://doi.org/10.1016/j.actamat.2023.11881410.1016/j.actamat.2023.118814 ↗
19. Li YJ, Hsu CW, Ting YH, Tsou NT, Lo YC, Wu WW, Tu KN, Chen C (2020) Deformation induced columnar grain rotation in nanotwinned metals. Mater Sci Eng A 797:140045. https://doi.org/10.1016/J.MSEA.2020.14004510.1016/J.MSEA.2020.140045 ↗
20. Borodin EN, Mayer AE, Gutkin MY (2020) Coupled model for grain rotation, dislocation plasticity and grain boundary sliding in fine-grained solids. Int J Plast 134:102776. https://doi.org/10.1016/J.IJPLAS.2020.10277610.1016/J.IJPLAS.2020.102776 ↗
21. Shaat M, Fathy A, Wagih A (2020) Correlation between grain boundary evolution and mechanical properties of ultrafine-grained metals. Mech Mater 143:103321. https://doi.org/10.1016/J.MECHMAT.2020.10332110.1016/J.MECHMAT.2020.103321 ↗
22. Hou JX, Li XY, Lu K (2021) Orientation dependence of mechanically induced grain boundary migration in nano-grained copper. J Mater Sci Technol 68:30–34. https://doi.org/10.1016/J.JMST.2020.08.01810.1016/J.JMST.2020.08.018 ↗
23. Zhilyaev A, Utyashev F, Raab G (2020) Superplasticity and grain boundaries in ultrafine-grained materials
24. Rai RK, Sahu VK, Pradhan SK, Rajinikanth V, Sahoo BK, Maji P, Tripathy S, Chowdhury SG (2024) On the influence of austenite content in orientation selectivity and shear texture evolution during hot rolling of Fe-3 wt% Si grain-oriented electrical steel. Mater Charact 217:114339. https://doi.org/10.1016/J.MATCHAR.2024.11433910.1016/J.MATCHAR.2024.114339 ↗
25. Ke R, Hu C, Zhong M, Wan X, Wu K (2022) Grain refinement strengthening mechanism of an austenitic stainless steel: critically analyze the impacts of grain interior and grain boundary. J Mater Res Technol 17:2999–3012. https://doi.org/10.1016/J.JMRT.2022.02.05610.1016/J.JMRT.2022.02.056 ↗
26. Staab F, Bruder E, Schäfer L, Skokov K, Koch D, Zingsem B, Adabifiroozjaei E, Molina-Luna L, Gutfleisch O, Durst K (2023) Hard magnetic SmCo5-Cu nanocomposites produced by severe plastic deformation. Acta Mater. https://doi.org/10.1016/j.actamat.2023.11870910.1016/j.actamat.2023.118709 ↗
27. Chakraborty S (2021) Crystal plasticity modeling of deformation in FCC metals and predictions for recrystallization nucleation
28. Zolotorevsky NY, Rybin VV, Khomskaya IV, Ushanova EA, Matvienko AN (2020) Orientation-dependent microstructure development during high-rate shear deformation of copper. Phil Mag 100:1499–1518. https://doi.org/10.1080/14786435.2020.172703810.1080/14786435.2020.1727038 ↗
29. Shabani A, Bagheri A, Toroghinejad MR, Cavaliere P (2024) Texture evolution and hardening behavior of Al/IF composite produced through severe plastic deformation. Mater Sci Eng A 889:145816. https://doi.org/10.1016/J.MSEA.2023.14581610.1016/J.MSEA.2023.145816 ↗
30. Krystian M, Horky J, Colas D, Neodo S, Diologent F (2019) Microstructure, mechanical properties, and thermal stability of lean, copper-free silver alloy subjected to equal channel angular pressing (ECAP) and subsequent post-processing. Mater Sci Eng A Mater Struct Prop Microstruct Process 757:52–61. https://doi.org/10.1016/J.MSEA.2019.04.05210.1016/J.MSEA.2019.04.052 ↗
31. Suresh M, Sharma A, More AM, Kalsar R, Bisht A, Nayan N, Suwas S (2019) Effect of equal channel angular pressing (ECAP) on the evolution of texture, microstructure and mechanical properties in the Al-Cu-Li alloy AA2195. J Alloys Compd 785:972–983. https://doi.org/10.1016/J.JALLCOM.2019.01.16110.1016/J.JALLCOM.2019.01.161 ↗
32. Eivani AR, Mirzakoochakshirazi HR, Jafarian HR (2020) Investigation of joint interface and cracking mechanism of thick cladding of copper on aluminum by equal channel angular pressing (ECAP). J Mater Res Technol 9:3394–3405. https://doi.org/10.1016/J.JMRT.2020.01.07510.1016/J.JMRT.2020.01.075 ↗
33. Zhao Z, Li Z, Wang Z, Xiao Z (2024) Effect of equal channel angular pressing on microstructure and mechanical properties of a Cu-Cr-Ni-Si-Co alloy. Mater Sci Eng A Mater Struct Prop Microstruct Process 916:147356. https://doi.org/10.1016/J.MSEA.2024.14735610.1016/J.MSEA.2024.147356 ↗
34. Muñoz JA, Khelfa T, Gheorghe D, Higuera OF, Rodriguez P, Cabrera JM (2023) Microstructure characterization of metallic materials processed by equal channel angular pressing (ECAP): an electron backscatter diffraction (EBSD) analysis. Mater Trans 64:1791–1805. https://doi.org/10.2320/MATERTRANS.MT-MF202204210.2320/MATERTRANS.MT-MF2022042 ↗
35. Ma M, Zhang X, Li Z, Xiao Z, Jiang H, Xia Z, Huang H (2020) Effect of Equal Channel Angular Pressing on Microstructure and Mechanical Properties of a Cu-Mg Alloy. Crystals 2020, Vol 10, Page 426 10:426. https://doi.org/10.3390/CRYST1006042610.3390/CRYST10060426 ↗
36. Mishra S, Suresh M, More AM, Bisht A, Nayan N, Suwas S (2021) Texture control to reduce yield strength anisotropy in the third generation aluminum-copper-lithium alloy: experiments and modeling. Mater Sci Eng A Mater Struct Prop Microstruct Process 799:140047. https://doi.org/10.1016/J.MSEA.2020.14004710.1016/J.MSEA.2020.140047 ↗
37. Yousefi Mehr V, Toroghinejad MR, Dutkiewicz J (2023) Unveiling slip/nanotwin/nano shear band deformation mechanisms at the copper side in a roll-welded aluminum/copper couple. Mater Charact 203:113039. https://doi.org/10.1016/J.MATCHAR.2023.11303910.1016/J.MATCHAR.2023.113039 ↗
38. Yousefi Mehr V, Toroghinejad MR, Rezaeian A, Asgari H, Szpunar JA (2022) Abnormal texture evolution of accumulative roll bonded Al–Cu by adding alumina particles. Heliyon. https://doi.org/10.1016/j.heliyon.2022.e0872310.1016/j.heliyon.2022.e08723 ↗
39. Li H, Ding Z, Chen Z, Tan F, Wu J (2019) Evolution of grain orientation and texture of copper and steel in copper cladding steel wires during drawing and annealing. Mater Res Express 6:106581. https://doi.org/10.1088/2053-1591/AB3B1110.1088/2053-1591/AB3B11 ↗
40. Bishara H, Lee S, Brink T, Ghidelli M, Dehm G (2021) Understanding grain boundary electrical resistivity in cu: the effect of boundary structure. ACS Nano 15:16607–16615. https://doi.org/10.1021/ACSNANO.1C0636710.1021/ACSNANO.1C06367 ↗
41. Dong L, Yang F, Yu T, Zhang N, Zhou X, Xie Z, Fang F (2023) Contribution of grain boundary to strength and electrical conductivity of annealed copper wires. J Mater Res Technol 26:1459–1468. https://doi.org/10.1016/J.JMRT.2023.08.01210.1016/J.JMRT.2023.08.012 ↗
42. Tu Y, Liu X, Wang W, Zhang W, Feng Q (2023) Grain boundary evolution and effect on electrical conductivity of CuTi alloys prepared by accumulative roll bonding-diffusion alloying process. Mater Charact 201:112958. https://doi.org/10.1016/J.MATCHAR.2023.11295810.1016/J.MATCHAR.2023.112958 ↗
43. Zhang J, Yang F, Liu Y, Zhong Z, Zhao J (2021) On the deformation-induced grain rotations in gradient nano-grained copper based on molecular dynamics simulations. Nanotechnol Rev 10:87–98. https://doi.org/10.1515/NTREV-2021-001010.1515/NTREV-2021-0010 ↗
44. Orłowska M, Ura-Bińczyk E, Olejnik L, Lewandowska M (2019) The effect of grain size and grain boundary misorientation on the corrosion resistance of commercially pure aluminium. Corros Sci 148:57–70. https://doi.org/10.1016/J.CORSCI.2018.11.03510.1016/J.CORSCI.2018.11.035 ↗
45. Yang X, Wang P, Huang M (2022) Grain boundary evolution during low-strain grain boundary engineering achieved by strain-induced boundary migration in pure copper. Materials Science and Engineering: A 833:142532. https://doi.org/10.1016/J.MSEA.2021.14253210.1016/J.MSEA.2021.142532 ↗
46. Parajuli P, Romeu D, Hounkpati V, Mendoza-Cruz R, Chen J, Yacamán MJ, Flowers J, Ponce A (2019) Misorientation dependence grain boundary complexions in < 111 > symmetric tilt al grain boundaries. Acta Mater 181:216–227. https://doi.org/10.1016/J.ACTAMAT.2019.09.01010.1016/J.ACTAMAT.2019.09.010 ↗
47. Zhu X, Cheng X (2020) Symmetric tilt grain boundary evolution during the growth of copper thin films: molecular dynamics simulation. Phys B Condens Matter 578:411838. https://doi.org/10.1016/J.PHYSB.2019.41183810.1016/J.PHYSB.2019.411838 ↗
48. Qin L, Zhao M, Liu J, Xie A, Rong L (2025) Atomic-scale investigation of precipitation on hydrogen-induced Σ3 twin boundary cracking in superalloys. J Alloys Compd 1025:180341. https://doi.org/10.1016/J.JALLCOM.2025.18034110.1016/J.JALLCOM.2025.180341 ↗
49. Zhang X, Lv Y, Hashimoto T, Nilsson JO, Zhou X (2021) Intergranular corrosion of AA6082 Al–Mg–Si alloy extrusion: the influence of trace Cu and grain boundary misorientation. J Alloys Compd 853:157228. https://doi.org/10.1016/J.JALLCOM.2020.15722810.1016/J.JALLCOM.2020.157228 ↗