Bulge bottoming process for reducing springback in U-bending of 980 MPa high-strength steel
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Park H-S, Barlat F, Lee S-Y (2023) Comparison of anisotropic yield functions and calibrations for accurate thickness prediction in hole expansion test. J Mater Process Technol 319:11807010.1016/j.jmatprotec.2023.118070 ↗
2. Essa A, Abeyrathna B, Rolfe B, Weiss M (2023) Incremental shape rolling of a variable depth profile. J Mater Process Technol 316:11796410.1016/j.jmatprotec.2023.117964 ↗
3. Feng Y, Shi S, Wang Z, Wang Z (2022) Research on mechanism of springback control by viscous medium with different mechanical properties. J Mater Process Technol 304:11754810.1016/j.jmatprotec.2022.117548 ↗
4. Martschin J, Rethmann P, Grodotzki J, Wrobel M, Meurer T, Tekkaya AE (2024) Quick prediction of thinning in stretch forming of hat-shaped profiles during multi-stage hot sheet metal forming. J Mater Process Technol 327:11836510.1016/j.jmatprotec.2024.118365 ↗
5. Wang H, Zhou J, Zhao T, Tao Y (2016) Springback compensation of automotive panel based on three-dimensional scanning and reverse engineering. Int J Adv Manuf Technol 85:1187–119310.1007/s00170-015-8042-x ↗
6. Yamano T, Iwaya J (2005) Method for predicting an amount of dimensional accuracy defect at the time of press-forming metal sheet
7. Sachs G, Voegeli HE (1966) Principles and methods of sheet-metal fabricating. Krieger Publishing Company, USA
8. Shawn Cheng H, Cao J, Xia ZC (2007) An accelerated springback compensation method. Int J Mech Sci 49:267–27910.1016/j.ijmecsci.2006.09.008 ↗
9. Lin HS, Lin HW (2022) Preforming strategies in correcting the spring-back from the U-shape bending. J Phys Conf Ser 2345:1201810.1088/1742-6596/2345/1/012018 ↗
10. Liu YC (1984) Springback reduction in U-channels—“double-bend” technique. J Appl Metalwork 3:148–15610.1007/BF02833694 ↗
11. Choi J, Lee J, Bong HJ, Lee M-G, Barlat F (2018) Advanced constitutive modeling of advanced high strength steel sheets for springback prediction after double stage U-draw bending. Int J Solids Struct 151:152–16410.1016/j.ijsolstr.2017.09.030 ↗
12. Meinders T, Burchitz IA, Bonté MHA, Lingbeek RA (2008) Numerical product design: springback prediction, compensation and optimization. Int J Mach Tools Manuf 48:499–51410.1016/j.ijmachtools.2007.08.006 ↗
13. Liang Z, Zou T, Dai W, Zhang Z, Liu Y, Lu K et al (2022) Compensate for longitudinally discrepant springback and bow in chain-die forming processes by multiple sections optimization. Int J Adv Manuf Technol 121:6407–643010.1007/s00170-022-09728-6 ↗
14. Lawanwong K, Hamasaki H, Hino R, Yoshida F (2014) A novel technology to eliminate U-bending springback of high strength steel sheet by using additional bending with counter punch. Procedia Eng 81:957–96210.1016/j.proeng.2014.10.124 ↗
15. Komgrit L, Hamasaki H, Hino R, Yoshida F (2016) Elimination of springback of high-strength steel sheet by using additional bending with counter punch. J Mater Process Technol 229:199–20610.1016/j.jmatprotec.2015.08.029 ↗
16. Lawanwong K, Hamasaki H, Hino R, Yoshida F (2020) Double-action bending for eliminating springback in hat-shaped bending of advanced high-strength steel sheet. Int J Adv Manuf Technol 106:1855–186710.1007/s00170-019-04678-y ↗
17. Ghaffari H, Alimirzaloo V, Farhadi S (2024) Improvement of electromagnetic calibration of springback in bent sheet metals using a novel tool coil. J Manuf Process 117:111–12410.1016/j.jmapro.2024.02.056 ↗
18. Kim M, Lee H, Park N (2022) Evaluation of deformation for titanium alloy sheet in single point incremental forming based on asymmetric yield function. Int J Mater Form 15:6610.1007/s12289-022-01712-5 ↗
19. Seo Y-H, Park J-W, Song W-J, Kang B-S, Kim J (2014) Flexible Die Design and Springback Compensation Based on Modified Displacement Adjustment Method. Adv Mech Eng 6:13125310.1155/2014/131253 ↗
20. Ogawa T, Yoshida F (2012) Effect of bottoming on reduction of springback in U-bending of high-strength steel sheet. J Jpn Soc Technol Plast 53:69–73
21. Ogawa T, Yoshida F (2011) Springback analysis of U-bending with bottoming. AIP Conf Proc 1383:1129–113610.1063/1.3623730 ↗
22. Barlat F, Aretz H, Yoon JW, Karabin ME, Brem JC, Dick RE (2005) Linear transfomation-based anisotropic yield functions. Int J Plast 21:1009–103910.1016/j.ijplas.2004.06.004 ↗
23. Yoshida F, Uemori T, Fujiwara K (2002) Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain. Int J Plast 18:633–65910.1016/S0749-6419(01)00049-3 ↗
24. Wagoner RH, Lim H, Lee MG (2013) Advanced Issues in springback. Int J Plast 45:3–2010.1016/j.ijplas.2012.08.006 ↗
25. Bong HJ, Lee J, Kim J-H, Barlat F, Lee M-G (2017) Two-stage forming approach for manufacturing ferritic stainless steel bipolar plates in PEM fuel cell: Experiments and numerical simulations. Int J Hydrogen Energy 42:6965–697710.1016/j.ijhydene.2016.12.094 ↗
26. Choi J, Lee J, Bae G, Barlat F, Lee M (2016) Evaluation of springback for DP980 S rail using anisotropic hardening models. JOM 68:1850–185710.1007/s11837-016-1924-z ↗
27. Lin B-T, Yang C-Y, Li T-C, Wang X-R, Kuo C-C (2022) Application of ANFIS to predict springback in U-bending of nickel-based alloy. Int J Adv Manuf Technol 120:6435–646110.1007/s00170-022-09189-x ↗
28. Papeleux L, Ponthot J-P (2002) Finite element simulation of springback in sheet metal forming. J Mater Process Technol 125:785–79110.1016/S0924-0136(02)00393-X ↗
29. Asgari S, Pereira M, Rolfe B, Dingle M, Hodgson P (2008) Statistical analysis of finite element modeling in sheet metal forming and springback analysis. J Mater Process Technol 203:129–13610.1016/j.jmatprotec.2007.09.073 ↗
30. Hou H, Zhao G, Yu J, Sun Y, Li H (2023) Experimental studies and modeling of strain rate- and temperature-dependent springback behavior of hot-deformed aluminum alloys. J Mater Process Technol 318:11802910.1016/j.jmatprotec.2023.118029 ↗
31. Ragai I, Lazim D, Nemes JA (2005) Anisotropy and springback in draw-bending of stainless steel 410: experimental and numerical study. J Mater Process Technol 166:116–12710.1016/j.jmatprotec.2004.08.007 ↗
32. Liu Z, Hou Y, He R, Ye Y, Niu C, Min J (2022) Machine learning for extending capability of mechanical characterization to improve springback prediction of a quenching and partitioning steel. J Mater Process Technol 308:11773710.1016/j.jmatprotec.2022.117737 ↗
33. Meng Q, Zhai R, Zhang Y, Fu P, Zhao J (2022) Analysis of springback for multiple bending considering nonlinear unloading-reloading behavior, stress inheritance and Bauschinger effect. J Mater Process Technol 307:11765710.1016/j.jmatprotec.2022.117657 ↗
34. Eggertsen PA, Mattiasson K (2010) On constitutive modeling for springback analysis. Int J Mech Sci 52:804–81810.1016/j.ijmecsci.2010.01.008 ↗
35. Eggertsen P-A, Mattiasson K (2011) On the identification of kinematic hardening material parameters for accurate springback predictions. Int J Mater Form 4:103–12010.1007/s12289-010-1014-7 ↗
36. Meng Q, Zhai R, Fu P, Zhang Y, Zhao J (2023) Springback analysis of rotary bending considering strain paths. J Mater Process Technol 31510.1016/j.jmatprotec.2023.117930 ↗
37. Chun B, Jinn J, Lee J (2002) Modeling the Bauschinger effect for sheet metals, part I: theory. Int J Plast 18:571–59510.1016/S0749-6419(01)00046-8 ↗
38. Chaboche JL (1986) Time-independent constitutive theories for cyclic plasticity. Int J Plast 2:149–18810.1016/0749-6419(86)90010-0 ↗
39. Geng L, Shen Y, Wagoner RH (2002) Anisotropic hardening equations derived from reverse-bend testing. Int J Plast 18:743–76710.1016/S0749-6419(01)00048-1 ↗
40. Yoshida F, Uemori T (2002) A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation. Int J Plast 18:661–68610.1016/S0749-6419(01)00050-X ↗
41. Wang Z, Hu Q, Yan J, Chen J (2017) Springback prediction and compensation for the third generation of UHSS stamping based on a new kinematic hardening model and inertia relief approach. Int J Adv Manuf Technol 90:875–88510.1007/s00170-016-9439-x ↗
42. Barlat F, Gracio JJ, Lee MG, Rauch EF, Vincze G (2011) An alternative to kinematic hardening in classical plasticity. Int J Plast 27:1309–132710.1016/j.ijplas.2011.03.003 ↗
43. Ha J, Lee M-G, Barlat F (2013) Strain hardening response and modeling of EDDQ and DP780 steel sheet under non-linear strain path. Mech Mater 64:11–2610.1016/j.mechmat.2013.04.004 ↗
44. Barlat F, Ha J, Grácio JJ, Lee M-G, Rauch EF, Vincze G (2013) Extension of homogeneous anisotropic hardening model to cross-loading with latent effects. Int J Plast 46:130–14210.1016/j.ijplas.2012.07.002 ↗
45. Barlat F, Vincze G, Grácio JJ, Lee M-G, Rauch EF, Tomé CN (2014) Enhancements of homogenous anisotropic hardening model and application to mild and dual-phase steels. Int J Plast 58:201–21810.1016/j.ijplas.2013.11.002 ↗
46. Yoon S-Y, Barlat F, Lee S-Y, Kim J-H, Wi M-S, Kim D-J (2022) Finite element implementation of hydrostatic pressure-sensitive plasticity and its application to distortional hardening model and sheet metal forming simulations. J Mater Process Technol 302:11749410.1016/j.jmatprotec.2022.117494 ↗
47. Kuwabara T, Ikeda S, Kuroda K (1998) Measurement and analysis of differen-tial work hardening in cold-rolled steel sheet under biaxial tension. J Mater Process Technol 80–81:517–52310.1016/S0924-0136(98)00155-1 ↗
48. Boger RK, Wagoner RH, Barlat F, Lee MG, Chung K (2005) Continuous, large strain, tension/compression testing of sheet material. Int J Plast 21:2319–234310.1016/j.ijplas.2004.12.002 ↗
49. Smith A, Chen Z, Lee JY, Lee MG, Wagoner RH (2014) Effective method for fitting complex constitutive equations. Int J Plast 58:100–11910.1016/j.ijplas.2014.01.005 ↗
50. Lee MG, Kim JH, Kim D, Seo OS, Nguyen NT, Kim HY (2013) Anisotropic Hardening of Sheet Metals at Elevated Temperature: Tension-Compressions Test Development and Validation. Exp Mech 53:1039–105510.1007/s11340-012-9694-1 ↗
51. Cleveland RM, Ghosh AK (2002) Inelastic effects on springback in metals. Int J Plast 18:769–78510.1016/S0749-6419(01)00054-7 ↗
52. Barlat F, Yoon S-Y, Lee S-Y, Wi M-S, Kim J-H (2020) Distortional plasticity framework with application to advanced high strength steel. Int J Solids Struct 202:947–96210.1016/j.ijsolstr.2020.05.014 ↗
53. ABAQUS (2021) User’s Manual, Hibbit,Karlsson & Sorensen Inc, USA
54. Choi H, Choi S, Kang SC, Lee MG (2021) Fully implicit stress update algorithm for distortion-based anisotropic hardening with cross-loading effect: Comparative algorithmic study and application to large-size forming problem. Appl Sci 11:550910.3390/app11125509 ↗
55. Kim JJ, Pham QT, Kim YS (2021) Thinning prediction of hole-expansion test for DP980 sheet based on a non-associated flow rule. Int J Mech Sci 191:10606710.1016/j.ijmecsci.2020.106067 ↗
56. Logan RW, Hosford WF (1980) Upper-bound anisotropic yield locus calculations assuming 〈111〉-pencil glide. Int J Mech Sci 22:419–43010.1016/0020-7403(80)90011-9 ↗
57. van den Boogaard T, Havinga J, Belin A, Barlat F (2016) Parameter reduction for the Yld 2004–18p yield criterion. Int J Mater Form 9:175–17810.1007/s12289-015-1221-3 ↗
58. Hershey AV (1954) The plasticity of an isotropic aggregate of anisotropic face centred cubic crystals. J Appl Mech Trans ASME 21:241–24910.1115/1.4010900 ↗
59. Zhang C, Lou Y (2023) Characterization and modelling of evolving plasticity behaviour up to fracture for FCC and BCC metals. J Mater Process Technol 317:11799710.1016/j.jmatprotec.2023.117997 ↗