Effect of initial preform geometry and friction on the cold deformation behaviour of sintered titanium carbide composite steel
Source abstract
Abstract
Cold upsetting experiments were carried on sintered titanium carbide composite steel preforms in order to assess their deformation characteristics. The effect of aspect ratio and frictional constraints on deformation behaviour have been investigated thoroughly. Cylindrical compacts with different aspect ratios were prepared, sintered and upset forged at room temperature. The above cold deformation work was carried out using 1.0 MN capacity Universal Testing Machine. Cold deformation experiments were carried out in several steps. Dimensions such as height, contact, and bulged diameters and densities were measured for each test. In general, each compact was subjected to an incremental compressive loading in steps of 0.005 MN until fine cracks appeared on its free surface. Effect of various upsetting parameters, namely, axial strain, axial stress, Poisson’s ratio on the densification has been studied.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Warren H, Hunt Jr (2000) Aluminum metal matrix composites today. Mater Sci Forum 331–337:71
2. Miracle DB (2005) Metal matrix composites—from science to technological significance. Compos Sci Technol 65(Issues 15–16):2526–2540 December10.1016/j.compscitech.2005.05.027 ↗
3. Divecha AP, Fishman SG, Karmarkar SD (1981) J Metals 33:12
4. Nair SV, Tien JK, Bates RC (1985) Int Metals Rev 30:275
5. Bhanu Prasad VV, Bhat BVR, Mahajan YR, Ramakrishnan P (2002) Structure-property correlation in discontinuously reinforced aluminium matrix composites as a function of relative particle size ratio. Mater Sci Eng A 337:179–18610.1016/S0921-5093(02)00024-2 ↗
6. Kuhn HA et al (1982) Deformation characteristics of iron-powder compacts. In: Aqua EN (ed) Modern developments in powder metallurgy, vol 15, pp 463–479
7. Narayanasamy R, Pandey KS (1990) Some aspects of barreling of porous solid cylinders under axial compression. Quarterly International Journal of Powder Metallurgy Science and Technology 1(2):24–34
8. Doraivelu SM, Gegel HL, Gunasekaran JS, Malas JC, Morugan JT (1984) A new yield function for compressible P/M materials. Int J Mech Sci 26:527–53510.1016/0020-7403(84)90006-7 ↗
9. Johnson PK (2000) Outstanding P/M designs replace stamped, cast and machined parts. Int J Powder Metall 36(5):49–56
10. Bockstiegel G (1996) Relationship between pore structure and densification mechanism in the compaction of iron powders—part II. Int J Powder Metall 2(4):129–137
11. Selvakumar N, Narayanasamy R (2005) Deformation behavior of cold upset forming of sintered Al–Fe composite performs. J Eng Mater Technol, ASME Transactions 127:251–25610.1115/1.1867984 ↗
12. Sowerby R, O’Reilly I, Chandrasekaran N, Dung NL (1984) Materials testing for cold forging. J Eng Mater Technol 106:101–10610.1115/1.3225668 ↗
13. German RM (1998) Powder metallurgy of iron and steel. Wiley, New York, pp 276–279
14. Hashmi MSJ (1978) Upsetting of cylindrical billets between flat platens having unequal frictional properties. Int J Mach Tool Des Res 18:189–19610.1016/0020-7357(78)90022-7 ↗
15. Yang DY, Choi Y, Kim JH (1991) Analysis of upset forging of cylindrical billets considering the dissimilar frictional conditions at two flat die surfaces. Int J Mach Tools Manuf 31(3):397–40410.1016/0890-6955(91)90084-G ↗
16. Selvakumar N, Narayanasamy R (2003) Phenomenon of strain hardening behavior of sintered aluminum preforms during cold axial forming. J Mater Process Technol 142(2):347–35410.1016/S0924-0136(03)00605-8 ↗
17. Narayanasamy R, Ramesh T, Pandey KS (2007) An experimental investigation on strain hardening behaviour of aluminium—3.5% alumina powder metallurgy composite preform under various stress states during cold upset forming. Mater Des 28(Issue 4):1211–122310.1016/j.matdes.2006.01.010 ↗
18. Pandey KS (1986) Indigenously developed ceramic coating. R.E.C. Trichy, Tamilnadu, India
19. Hassan SF, Gupta M (2002) Development of high strength magnesium based composites using elemental nickel particulates as reinforcement. J Mater Sci 37:2467–247410.1023/A:1015475103720 ↗
20. Abdel-Rahman M, El-Sheikh MN (1995) Workability in forging of powder metallurgy compacts. J Mater Process Technol 54:97–10210.1016/0924-0136(95)01926-X ↗