Experimental study on the meso-scale milling of tungsten carbide WC-17.5Co with PCD end mills
Source abstract
Abstract
Tungsten carbide is a material that is very difficult to cut, mainly owing to its extreme wear resistance. Its high value of yield strength, accompanied by extreme brittleness, renders its machinability extremely poor, with most tools failing. Even when cutting with tool materials of the highest quality, its mode of cutting is mainly brittle and marred by material cracking. The ductile mode of cutting is possible only at micro levels of depth of cut and feed rate. This study aims to investigate the possibility of milling the carbide material at a meso-scale using polycrystalline diamond (PCD) end mills. A series of end milling experiments were performed to study the effects of cutting speed, feed per tooth, and axial depth of cut on performance measures such as cutting forces, surface roughness, and tool wear. To characterize the wear of PCD tools, a new approach to measuring the level of damage sustained by the faces of the cutter’s teeth is presented. Analyses of the experimental data show that the effects of all the cutting parameters on the three performance measures are significant. The major damage mode of the PCD end mills is found to be the intermittent micro-chipping. The progress of tool damage saw a long, stable, and steady period sandwiched between two short, abrupt, and intermittent periods. Cutting forces and surface roughness are found to rise with increments in the three cutting parameters, although the latter shows signs of reduction during the initial increase in cutting speed only. The results of this study find that an acceptable surface quality (average roughness $$R_{\text{a}} 600\,{\text{mm}}$$) can be obtained under the conditions of the given cutting parameters. It indicates that milling with PCD tools at a meso-scale is a suitable machining method for tungsten carbides.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced Surface Polishing Techniques · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Ottersbach M, Zhao W (2016) Experimental investigations on the machinability of tungsten carbides in orthogonal cutting with diamond-coated tools. Procedia CIRP 46:416–41910.1016/j.procir.2016.04.008 ↗
2. Zhao W, Yang Q, Khan AM et al (2019) An inverse-identification-based finite element simulation of orthogonal cutting tungsten carbide. J Braz Soc Mech Sci Eng 41:1–1210.1007/s40430-018-1505-x ↗
3. Krain HR, Sharman ARC, Ridgway K (2007) Optimisation of tool life and productivity when end milling Inconel 718TM. J Mater Process Technol 189(1/3):153–16110.1016/j.jmatprotec.2007.01.017 ↗
4. Fang ZZ (2005) Correlation of transverse rupture strength of WC-Co with hardness. Int J Refract Met H 23(2):119–12710.1016/j.ijrmhm.2004.11.005 ↗
5. Saito H, Iwabuchi A, Shimizu T (2006) Effects of Co content and WC grain size on wear of WC cemented carbide. Wear 261(2):126–13210.1016/j.wear.2005.09.034 ↗
6. Li T, Li Q, Fuh JYH et al (2006) Effects of lower cobalt binder concentrations in sintering of tungsten carbide. Mater Sci Eng A 430(1/2):113–11910.1016/j.msea.2006.05.118 ↗
7. Liu K, Li XP (2001) Ductile cutting of tungsten carbide. J Mater Process Technol 113(1/3):348–35410.1016/S0924-0136(01)00582-9 ↗
8. Arif M, Rahman M, San WY (2012) Analytical model to determine the critical conditions for the modes of material removal in the milling process of brittle material. J Mater Process Technol 212(9):1925–193310.1016/j.jmatprotec.2012.04.014 ↗
9. Suzuki H, Okada M, Fujii K et al (2013) Development of micro milling tool made of single crystalline diamond for ceramic cutting. CIRP Ann Manuf Technol 62(1):59–6210.1016/j.cirp.2013.03.096 ↗
10. Nakamoto K, Katahira K, Ohmori H et al (2012) A study on the quality of micro-machined surfaces on tungsten carbide generated by PCD micro end-milling. CIRP Ann Manuf Technol 61(1):567–57010.1016/j.cirp.2012.03.112 ↗
11. Liu K, Li XP, Rahman M (2003) CBN tool wear in ductile cutting of tungsten carbide. Wear 255(7/12):1344–135110.1016/S0043-1648(03)00061-9 ↗
12. Zhang J, Suzuki N, Wang Y et al (2014) Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond. J Mater Process Technol 214(11):2644–265910.1016/j.jmatprotec.2014.05.024 ↗
13. Tamaki JI, Kubo A, Ullah AS (2014) Wear characteristics of nano-polycrystalline diamond tool in cutting of tungsten carbide. Int J Mechatron Manuf Syst 7(4/6):227–245
14. Zhan Z, He N, Li L et al (2015) Precision milling of tungsten carbide with micro PCD milling tool. Int J Adv Manuf Technol 77(9/12):2095–210310.1007/s00170-014-6632-7 ↗
15. Kuppuswamy R, Mkhize N (2017) Near ductile regime machining of tungsten carbide insert through control of cutting speed parameter while using a poly-crystalline diamond tool. Procedia Manuf 8:549–55610.1016/j.promfg.2017.02.070 ↗
16. Wojciechowski S, Nowakowski Z, Majchrowski R et al (2017) Surface texture formation in precision machining of direct laser deposited tungsten carbide. Adv Manuf 5(3):251–26010.1007/s40436-017-0188-3 ↗
17. Doetz M, Dambon O, Klocke F et al (2018) Process control in ductile mode machining of tungsten carbide. In: The 5th European seminar on precision optics manufacturing, Teisnach, Germany. https://doi.org/10.1117/12.231870910.1117/12.2318709 ↗
18. Sakamoto S, Suwa H, Moriwaki T (2017) Wear properties of diamond-coated ball end tools in milling of tungsten carbide. In: JSME, proceedings of international conference on leading edge manufacturing in 21st century, Hiroshima City, Japan. https://doi.org/10.1299/jsmelem.2017.9.05010.1299/jsmelem.2017.9.050 ↗
19. Suzuki H, Okada M, Asai W et al (2017) Ultraprecision cutting of silicon carbide using micro milling tool of single crystalline diamond. In: JSME, proceedings of international conference on leading edge manufacturing in 21st century. https://doi.org/10.1299/jsmelem.2017.9.08410.1299/jsmelem.2017.9.084 ↗
20. Katahira K, Ohmori H, Takesue S et al (2015) Effect of atmospheric-pressure plasma jet on polycrystalline diamond micro-milling of silicon carbide. CIRP Ann Manuf Technol 64(1):129–13210.1016/j.cirp.2015.04.097 ↗
21. Okada M, Yoshida A, Furumoto T et al (2016) Mechanisms and characteristics of direct cutting of tungsten carbide using a diamond-coated carbide end mill. Int J Adv Manuf Technol 86(5/8):1827–183910.1007/s00170-015-8324-3 ↗
22. Minami T, Itoigawa F, Maegawa S et al (2015) Basic study on failure process of CVD diamond coating tool in machining of cemented carbide materials. In: JSME, proceedings of international conference on leading edge manufacturing in 21st century, Kyoto, Japan. https://doi.org/10.1299/jsmelem.2015.8.0522-110.1299/jsmelem.2015.8.0522-1 ↗
23. Goel S, Luo X, Comley P et al (2013) Brittle-ductile transition during diamond turning of single crystal silicon carbide. Int J Mach Tool Manuf 65:15–2110.1016/j.ijmachtools.2012.09.001 ↗
24. Yui A, Kitajima T, Krajnik P et al (2014) Effect of cutting fluid on diamond tool life under micro V-groove turning of cobalt-free tungsten carbide. Adv Mater Res 1017:181–18610.4028/www.scientific.net/AMR.1017.181 ↗
25. Bian R, Ferraris E, He N et al (2014) Process investigation on meso-scale hard milling of ZrO2 by diamond coated tools. Precis Eng 38(1):82–9110.1016/j.precisioneng.2013.07.007 ↗
26. Mia M, Bashir MA, Khan MA et al (2017) Optimization of MQL flow rate for minimum cutting force and surface roughness in end milling of hardened steel (HRC 40). Int J Adv Manuf Technol 89(1/4):675–69010.1007/s00170-016-9080-8 ↗
27. Singh G, Gupta MK, Mia M et al (2018) Modeling and optimization of tool wear in MQL-assisted milling of Inconel 718 superalloy using evolutionary techniques. Int J Adv Manuf Technol 97(1/4):481–49410.1007/s00170-018-1911-3 ↗
28. Li H, Lai X, Li C et al (2007) Modelling and experimental analysis of the effects of tool wear, minimum chip thickness and micro tool geometry on the surface roughness in micro-end-milling. J Micromech Microeng 18(2):1–1210.1088/0960-1317/17/1/R01 ↗