Study of the slippage and sliding mesoscopic defects during complex shape preforming of woven fabric
Source abstract
Abstract
International audience ; This study proposes to study the sliding and slippage mesoscopic defects that appear during the preforming phase of dry reinforcements to produce complex composite shapes. For this purpose, experimental preforming tests were conducted on a plain weave fabric with low cohesion using a specific punch developed specifically for this purpose, and which combines the geometric facets of a square and a tetrahedron. The tests were conducted under several configurations varying the blank holder pressure intensity as well as its distribution, through the number and springs position that generate normal forces on the blank holders. The results showed that the corners of the geometry formed by orthogonal faces favor the appearance of mesoscopic defects and specifically slippage because of its severity. Sliding has shown itself to be very sensitive both to the singularities of the geometry where it appears, and to the heterogeneity of the pressure distribution of the blank holders. On the other hand, the sliding, which appears in the vicinity of the slippage on flat faces, is rather sensitive to the distribution of the pressure. The increase in the blank holder pressure, regardless of the conditions of its application, leads to an almost linear increase in the extent and number of these mesoscopic defects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Textile materials and evaluations · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Prabhu R, Roopashree B, Jeevananda T, Rao S, Reddy KR, Raghu AV (2021) Synthesis and corrosion resistance properties of novel conjugated polymer-Cu2Cl4L3 composites. Mater Sci Energy Technol 4:92–99. https://doi.org/10.1016/j.mset.2021.01.00110.1016/j.mset.2021.01.001 ↗
2. Meghlaoui B, Ould Ouali M, Hocine S (2019) Effect of chemical treatment of Alfa natural fibers on the mechanical properties of polyethylene matrix composites. UPB Sci Bull B: Chem Mater Science 81(2):115–122
3. Berthelot JM, Assarar M, Sefrani Y, El Maho A (2021) Damping in composite materials and structures. Compos Struct 85(3):189–204. https://doi.org/10.1016/j.compstruct.2007.10.02410.1016/j.compstruct.2007.10.024 ↗
4. Abdul-Latif A, Ahmed-Ali A, Baleh R, Ouali Ould (2017) M. Innovative solution for strength enhancement of metallic like-composite tubular structures axially crushed used as energy dissipating devices. Thin-Walled Struct 119:332–344. https://doi.org/10.1016/j.tws.2017.06.02410.1016/j.tws.2017.06.024 ↗
5. Azzouz R, Allaoui S, Moulart R (2021) Composite preforming defects: a review and a classification. Int J Mater Form 14:1259–1278. https://doi.org/10.1007/s12289-021-01643-710.1007/s12289-021-01643-7 ↗
6. Bloom LD, Wang J, Potter KD (2013) Damage progression and defect sensitivity: An experimental study of representative wrinkles in tension. Compos B Eng 45(1):449–458. https://doi.org/10.1016/j.compositesb.2012.05.02110.1016/j.compositesb.2012.05.021 ↗
7. Potter K, Khan B, Wisnom M, Bell T, Stevens J (2008) Variability, fibre waviness and misalignment in the determination of the properties of composite materials and structures. Compos A Appl Sci Manuf 39(9):1343–1354. https://doi.org/10.1016/j.compositesa.2008.04.01610.1016/j.compositesa.2008.04.016 ↗
8. Boisse P, Hamila N, Vidal-Sallé E, Dumont F (2011) Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses. Compos Sci Technol 71(5):683–692. https://doi.org/10.1016/j.compscitech.2011.01.01110.1016/j.compscitech.2011.01.011 ↗
9. Hosseini A, Kashani MH, Sassani F, Milani AS, Ko FK (2018) Identifying the distinct shear wrinkling behavior of woven composite preforms under bias extension and picture frame tests. Compos Struct 185:764–773. https://doi.org/10.1016/j.compstruct.2017.11.03310.1016/j.compstruct.2017.11.033 ↗
10. Nosrat Nezami F, Gereke T, Cherif C (2016) Analyses of interaction mechanisms during forming of multilayer carbon woven fabrics for composite applications. Compos Part Appl Sci Manuf 84:406–416. https://doi.org/10.1016/j.compositesa.2016.02.02310.1016/j.compositesa.2016.02.023 ↗
11. Viisainen JV, Yu F, Codolini A, Chen S, Harper LT, Sutcliffe MPF (2023) Rapidly predicting the effect of tool geometry on the wrinkling of biaxial NCFs during composites manufacturing using a deep learning surrogate model. Composite Part B 253:110536. https://doi.org/10.1016/j.compositesb.2023.11053610.1016/j.compositesb.2023.110536 ↗
12. Lightfoot JS, Wisnom MR, Potter K (2013) Defects in woven preforms: formation mechanisms and the effects of laminate design and layup protocol. Compos Part A Appl Sci Manuf 51:99–107. https://doi.org/10.1016/j.compositesa.2013.04.00410.1016/j.compositesa.2013.04.004 ↗
13. El-Hajjar RF, Petersen DR (2011) Gaussian function characterization of unnotched tension behavior in a carbon/epoxy composite containing localized fiber waviness. Compos Struct 93(9):2400–2408. https://doi.org/10.1016/j.compstruct.2011.03.02910.1016/j.compstruct.2011.03.029 ↗
14. Cruanes C, Shanwan A, Méo S, Allaoui S, Deffarges MP, Lacroix F, Hivet G (2018) Effect of mesoscopic out-of-plane defect on the fatigue behavior of a GFRP. Mech Mater 117:214–224. https://doi.org/10.1016/j.mechmat.2017.11.00810.1016/j.mechmat.2017.11.008 ↗
15. Alves MP, Cimini Junior CA, Ha SK (2021) Fiber waviness and its effect on the mechanical performance of fiber reinforced polymer composites: An enhanced review. Compos A Appl Sci Manuf 149:106526. https://doi.org/10.1016/j.compositesa.2021.10652610.1016/j.compositesa.2021.106526 ↗
16. Fedulov B, Antonov F, Safonov A, Ushakov A, Lomov S (2015) Influence of fibre misalignment and voids on composite laminate strength. J Compos Mater 49(23):2887–2896. https://doi.org/10.1177/002199831455753310.1177/0021998314557533 ↗
17. Kacimi B, Djebbar A, Allaoui S, Hivet G, Teklal F (2019) Effect of reinforcement shear and mesoscopic defects on the low velocity impact behavior of a GFRP. IntJ Mater Form 14:3–17. https://doi.org/10.1007/s12289-019-01521-310.1007/s12289-019-01521-3 ↗
18. Kulkarni P, Mali KD, Singh S (2022) Experimental investigations on flexural performance of polymer composites with non-uniform out-of-plane waviness defect. J Thermoplast Compos Mater 36(7):2703–2717. https://doi.org/10.1177/0892705722110839310.1177/08927057221108393 ↗
19. Härtel F, Middendorf P (2013) Process parameters studies and comparison of different preform processes with NCF material. In: Proceeding of the 19th International Conference on Composite Materials, Montreal (Canada), July 28- August 2, 2013
20. Allaoui S, Hivet G, Soulat D, Wendling A, Ouagne P, Chatel S (2014) Experimental preforming of highly double curved shapes with a case corner using an interlock reinforcement. IntJ Mater Form 7(2):155–165. https://doi.org/10.1007/s12289-012-1116-510.1007/s12289-012-1116-5 ↗
21. Boisse P, Hamila N, Madeo A (2016) Modelling the development of defects during composite reinforcements and prepreg forming. Philos Trans R Soc A Math Phys Eng Sci 374(2071):20150269. https://doi.org/10.1098/rsta.2015.026910.1098/rsta.2015.0269 ↗
22. Molnár K, Virág ÁD, Halász M (2020) Shear and yarn pull-out grip for testing flexible sheets by universal load machines. Polym Testing 82:106345. https://doi.org/10.1016/j.polymertesting.2020.10634510.1016/j.polymertesting.2020.106345 ↗
23. Bai R, Li W, Zhenkun Lei Yu, Ma FQ, Fang Q, Chen X, Chen Y (2018) Experimental study of yarn friction slip and fabric shear deformation in yarn pull-out test. Compos A 107:529–535. https://doi.org/10.1016/j.compositesa.2018.02.00110.1016/j.compositesa.2018.02.001 ↗
24. Shanwan A, Allaoui S, Gillibert J, Hivet G (2021) Development and implementation of an experimental machine to study woven fabric preforming defects. Exp Tech 46:299–316. https://doi.org/10.1007/s40799-021-00483-z10.1007/s40799-021-00483-z ↗
25. Azzouz R, Allaoui S (2022) Effect of the Geometries on the Fabric’s Formability. In Key Engineering Materials (Vol. 926, pp. 1336–1342). Trans Tech Publications, Ltd. https://doi.org/10.4028/p-12qw7i10.4028/p-12qw7i ↗
26. Turk MA, Vermes B, Thompson AJ, Belnoue J-H, Hallett SR, Ivanov DS (2020) Mitigating forming defects by local modification of dry preform. Compos Part A 128:105643. https://doi.org/10.1016/j.compositesa.2019.10564310.1016/j.compositesa.2019.105643 ↗
27. Chen S, McGregor OPL, Harper LT, Endruweit A, Warrior NA (2016) Defect formation during preforming of a bi-axial non-crimp fabric with a pillar stitch pattern. Compos Part A: Appl Sci Manuf 91(1):156–167. https://doi.org/10.1016/j.compositesa.2016.09.01610.1016/j.compositesa.2016.09.016 ↗
28. Harrison P, Gomes R, Curado-Correia N (2013) Press forming a 0/90 cross-ply advanced thermoplastic composite using the double dome benchmark geometry. Compos A Appl Sci Manuf 54:56–69. https://doi.org/10.1016/j.compositesa.2013.06.01410.1016/j.compositesa.2013.06.014 ↗
29. Chen S, McGregor OPL, Harper LT, Endruweit A, Warrior NA (2018) Optimisation of local in-plane constraining forces in double diaphragm forming. Composite Structure 201:570–581. https://doi.org/10.1016/j.compstruct.2018.06.06210.1016/j.compstruct.2018.06.062 ↗
30. Mallach A, Härtel F, Heieck F, Fuhr J-P, Middendorf P, Gude M (2017) Experimental comparison of a macroscopic draping simulation for dry non-crimp fabric preforming on a complex geometry by means of optical measurement. J Compos Mater 51(16):2363–2375. https://doi.org/10.1177/002199831667047710.1177/0021998316670477 ↗
31. Lee JS, Hong SJ, Yu WR, Kang TJ (2007) The effect of blank holder force on the stamp forming behavior of non-crimp fabric with a chain stitch. Compos Sci Technol 67:357–366. https://doi.org/10.1016/j.compscitech.2006.09.00910.1016/j.compscitech.2006.09.009 ↗
32. Boisse P, Hamila N, Vidal-Sallé E, Dumont F (2011) Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses. Compos Sci Technol 71:683–692. https://doi.org/10.1016/j.compscitech.2011.01.01110.1016/j.compscitech.2011.01.011 ↗
33. Allaoui S, Boisse P, Chatel S, Hamila N, Hivet G, Soulat D, Vidal-Salle E (2011) Experimental and numerical analyses of textile reinforcement forming of a tetrahedral shape. Compos A Appl Sci Manuf 42(6):612–622. https://doi.org/10.1016/j.compositesa.2011.02.00110.1016/j.compositesa.2011.02.001 ↗
34. Ouagne P, Soulat D, Tephany C, Duriatti D, Allaoui S, Hivet G (2013) Mechanical characterization of flax-based woven fabrics and in situ measurements of tow tensile strain during the shape forming. J Compos Mater 47(28):3501–3515. https://doi.org/10.1177/002199831246721710.1177/0021998312467217 ↗
35. Sachs U, Akkerman R, Fetfatsidis K, Vidal-Sallé E, Schumacher J, Ziegmann G, Allaoui S, Hivet G, Maron B, Vanclooster K, Lomov SV (2014) Characterization of the dynamic friction of woven fabrics: Experimental methods and Benchmark results. Compos Part A: Appl Sci Manuf 67:289–298. https://doi.org/10.1016/j.compositesa.2014.08.02610.1016/j.compositesa.2014.08.026 ↗