Analytical modelling of buckling in stringer sheet forming
Source abstract
Abstract
Stringer sheet forming enables an efficient production of branched sheet metal structures. Compared to conventional sheet metal components, stringer sheets show a significant increase in stiffness and therefore offer new possibilities for lightweight design. A challenge in stringer sheet forming is the failure due to instability, which appears in the buckling of the stringer in concave curvatures. The prediction of this failure mode is so far only possible by complex numerical simulations. This work introduces an analytical model for the prediction of the buckling failure during forming of concave stringer sheet curvatures under different process boundary conditions. It is derived from Kirchhoff’s plate theory. A detailed sensitivity analysis of all influencing parameters is shown and extends the process understanding. The model is validated by means of a 4-point bending test and a stamping process. It can be used for a conservative estimation of the buckling failure limit in stringer sheet forming.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Structural Integrity and Reliability Analysis · Engineering Structural Analysis Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Bar-Cohen Y (2006) Biomimetics - using nature to inspire human innovation. Bioinspiration Biomim 1(1):1–1210.1088/1748-3182/1/1/P01 ↗
2. Zhao L, Ma J, Wang T, Xing D (2010) Lightweight design of mechanical structures based on structural bionic methodology. J Bionic Eng 7(4):S224–S23110.1016/S1672-6529(09)60239-0 ↗
3. Köhler S, Rohnert C, Groche P (2018) Extension of geometric limits in drawing of stringer sheets. Procedia Manuf 15:693–70010.1016/j.promfg.2018.07.302 ↗
4. Groche P, Bruder E, Gramlich S (eds) (2017) Manufacturing Integrated Design - Sheet Metal Product and Process Innovation. Springer international Publishing AG, Cham (Switzerland)10.1007/978-3-319-52377-4 ↗
5. Ertugrul M, Groche P (2009) Hydroforming of laser welded sheet stringers. Key Eng Mater 410-411:69–7610.4028/www.scientific.net/KEM.410-411.69 ↗
6. Bäcker F (2015) Forming of multi-axially strongly curved steel sheets with load-adapted stiffening ribs. In German: Formgebung mehrachsig stark gekrümmter Stahlbleche mit lastangepassten Versteifungsrippen. Dissertation, Technische Universität Darmstadt (Institut für Produktionstechnik und Umformmaschinen),
7. Ertugrul M (2011) Active media-based deep drawing of ribbed sheets. In German: Wirkmedienbasiertes Tiefziehen von verrippten Blechen. Dissertation, Technische Universität Darmstadt (Institut für Produktionstechnik und Umformmaschinen),
8. Volk W, Groche P, Brosius A, Ghiotti A, Kinsey BL, Liewald M, Madej L, Min J, Yanagimoto J (2019) Models and modelling for process limits in metal forming. CIRP Ann Manuf Technol 62(2):775–79810.1016/j.cirp.2019.05.007 ↗
9. Ventsel E, Krauthammer T (2001) Thin plates and shells: theory, analysis, and applications. CRC press10.1201/9780203908723 ↗
10. Senior BW (1956) Flange wrinkling in deep-drawing operations. J Mech Phys Solids 4(4):235–246. https://doi.org/10.1016/0022-5096(56)90032-110.1016/0022-5096(56)90032-1 ↗
11. Cao J, Boyce MC (1997) Wrinkling behavior of rectangular plates under lateral constraint. Int J Solids Struct 34(2):153–176. https://doi.org/10.1016/S0020-7683(96)00008-X10.1016/S0020-7683(96)00008-X ↗
12. Wang X, Cao J (2000) An analytical prediction of flange wrinkling in sheet metal forming. J Manuf Process 2(2):100–107. https://doi.org/10.1016/S1526-6125(00)70017-X10.1016/S1526-6125(00)70017-X ↗
13. Wang X, Cao J (2000) On the prediction of side-wall wrinkling in sheet metal forming processes. Int J Mech Sci 42(12):2369–2394. https://doi.org/10.1016/S0020-7403(99)00078-810.1016/S0020-7403(99)00078-8 ↗
14. Bleich F (1952) Buckling strength of metal structures. McGraw-hill, New York
15. Groche P, Zettler A, Berner S, Schneider G (2011) Development and verification of a one-step-model for the design of flexible roll formed parts. Int J Mater Form 4(4):371–37710.1007/s12289-010-0998-3 ↗
16. Magrinho JPG, Silva CMA, Silva MB, Martins PAF (2018) Formability limits by wrinkling in sheet metal forming. Proc Inst Mech Eng Part L: J Mater Design Appl 232(8):681–692
17. Yan Y, Wang H-b, Wan M (2011) Prediction of stiffener buckling in press bend forming of integral panels. Transa Nonferr Metal Soc China 21(11):2459–2465. https://doi.org/10.1016/S1003-6326(11)61037-610.1016/S1003-6326(11)61037-6 ↗
18. Groche P, Köhler S, Kern S (2018) Stamping of stringer sheets. J Manuf Process 36:319–329. https://doi.org/10.1016/j.jmapro.2018.10.02510.1016/j.jmapro.2018.10.025 ↗
19. Groche P, Bäcker F (2013) Springback in stringer sheet stretch forming. CIRP Ann Manuf Technol 62(1):275–278. https://doi.org/10.1016/j.cirp.2013.03.11710.1016/j.cirp.2013.03.117 ↗
20. Bäcker F, Groche P (2014) An algorithm for positioning functional and structural elements on semi-finished products for forming technology. In German: Ein Algorithmus zur Positionierung von Funktions- und Strukturelementen auf Halbzeugen für die Umformtechnik. Zwischenkolloquium SFB 666 Tagungsband 5
21. Bäcker F, Groche P, Abedini S (2012) Stringer Sheet Forming. Paper presented at the Proceedings of NAMRI/SME, Notre Dame (Indiana)
22. Bäcker F, Bratzke D, Groche P, Ulbrich S (2015) Time-varying process control for stringer sheet forming by a deterministic derivative-free optimization approach. Int J Adv Manuf Technol 80(5):817–840. https://doi.org/10.1007/s00170-015-7048-810.1007/s00170-015-7048-8 ↗
23. Köhler S, Groche P, Baron A, Schuchard M (2016) Forming of stringer sheets with solid tools. Adv Mater Res 1140:3–1010.4028/www.scientific.net/AMR.1140.3 ↗
24. Yu Y, Haibo W, Min W (2011) Prediction of fracture in press bend forming of aluminum alloy high-stiffener integral panels. Comput Mater Sci 50(7):2232–2244. https://doi.org/10.1016/j.commatsci.2011.02.03410.1016/j.commatsci.2011.02.034 ↗
25. C-g L, Li J, Dong Y-n, X-g Z, Yue T (2017) Fracture prediction in the forming of aircraft Al stiffeners using multi-point dies. Int J Adv Manuf Technol 90(9):3109–3118. https://doi.org/10.1007/s00170-016-9634-910.1007/s00170-016-9634-9 ↗
26. Luo H, Li W, Li C, Wan M (2017) Investigation of creep-age forming of aluminum lithium alloy stiffened panel with complex structures and variable curvature. Int J Adv Manuf Technol 91(9):3265–3271. https://doi.org/10.1007/s00170-017-0004-z10.1007/s00170-017-0004-z ↗
27. Timoshenko SP, Gere JM (1961) Theory of elastic stability. Dover Publications, New York
28. Hill R (1958) A general theory of uniqueness and stability in elastic-plastic solids. J Mech Phys Solids 6(3):236–249. https://doi.org/10.1016/0022-5096(58)90029-210.1016/0022-5096(58)90029-2 ↗
29. Hutchinson J, Neale K (1985) Wrinkling of curved thin sheet metal. Plastic instability: 71–78
30. Virot E, Kreilos T, Schneider TM, Rubinstein SM (2017) Stability landscape of Shell buckling. Phys Rev Lett 119(22):224101. https://doi.org/10.1103/PhysRevLett.119.22410110.1103/PhysRevLett.119.224101 ↗
31. Zheng K, Lee J, Lin J, Dean TA (2017) A buckling model for flange wrinkling in hot deep drawing aluminium alloys with macro-textured tool surfaces. Int J Mach Tools Manuf 114(Supplement C):21–34. https://doi.org/10.1016/j.ijmachtools.2016.12.00810.1016/j.ijmachtools.2016.12.008 ↗
32. Kirchoff G (1850) About the balance and movement of an elastic disc. In German: Über das Gleichgewicht und die Bewegung einer elastischen Scheibe. Journal fur die reine und angewandte Mathematik (Crelle's Journal) 40:51–88
33. Liu N, Yang H, Li H, Yan S (2016) Plastic wrinkling prediction in thin-walled part forming process: a review. Chin J Aeronaut 29(1):1–1410.1016/j.cja.2015.09.004 ↗
34. Saxena RK, Dixit PM (2010) Prediction of flange wrinkling in deep drawing process using bifurcation criterion. J Manuf Process 12(1):19–29. https://doi.org/10.1016/j.jmapro.2010.01.00310.1016/j.jmapro.2010.01.003 ↗
35. Kim J, Yoon JW, Yang D (2003) Investigation into the wrinkling behaviour of thin sheets in the cylindrical cup deep drawing process using bifurcation theory. Int J Numer Methods Eng 56(12):1673–170510.1002/nme.629 ↗
36. Kawka M, Olejnik L, Rosochowski A, Sunaga H, Makinouchi A (2001) Simulation of wrinkling in sheet metal forming. J Mater Process Technol 109(3):283–28910.1016/S0924-0136(00)00813-X ↗
37. Correia JDM, Ferron G (2004) Wrinkling of anisotropic metal sheets under deep-drawing: analytical and numerical study. J Mater Process Technol 155:1604–161010.1016/j.jmatprotec.2004.04.270 ↗
38. Narayanasamy R, Sowerby R (1995) Wrinkling behaviour of cold-rolled sheet metals when drawing through a tractrix die. J Mater Process Technol 49(1):199–211. https://doi.org/10.1016/0924-0136(94)01331-T10.1016/0924-0136(94)01331-T ↗
39. Banu M, Takamura M, Hama T, Naidim O, Teodosiu C, Makinouchi A (2006) Simulation of springback and wrinkling in stamping of a dual phase steel rail-shaped part. J Mater Process Technol 173(2):178–184. https://doi.org/10.1016/j.jmatprotec.2005.11.02310.1016/j.jmatprotec.2005.11.023 ↗
40. Morovvati MR, Fatemi A, Sadighi M (2011) Experimental and finite element investigation on wrinkling of circular single layer and two-layer sheet metals in deep drawing process. Int J Adv Manuf Technol 54(1):113–121. https://doi.org/10.1007/s00170-010-2931-910.1007/s00170-010-2931-9 ↗
41. Ludwik P (1909) Elements of technological mechanics. In German: Elemente der technologischen Mechanik. Springer-Verlag, Berlin10.1007/978-3-662-40293-1 ↗
42. Reihle M (1961) A simple method for recording the flow curves of steel at room temperature. In German: Ein einfaches Verfahren zur Aufnahme der Fließkurven von Stahl bei Raumtemperatur, in arch. Eisenhüttenwes. 32:331–33610.1002/srin.196103225 ↗
43. Dietrich J (2018) Forming practice: forming and cutting processes, tools, machines. In German: Praxis der Umformtechnik : Umform- und Zerteilverfahren, Werkzeuge, Maschinen. 12. Aufl. 2018 edn., Wiesbaden
44. Doege E and Behrens BA (2010) Handbook forming. In German: Handbuch Umformtechnik. Springer, Berlin, Heidelberg10.1007/978-3-642-04249-2 ↗
45. DIfNe V (1998) EN ISO 14125 - Faserverstärkte Kunststoffe - Bestimmung der Biegeeigenschaften. Beuth Verlag GmbH, Berlin
46. PtU Equipment GOM Aramis. Institut für Produktionstechnik und Umformmaschinen (Technische Universität Darmstadt). https://www.ptu.tu-darmstadt.de/mn_wirueberuns/menu_austattung/menu_messtechnik/menu_gomaramisgomargus/ptu_gomaramisgomargus.en.jsp. Accessed 21.04.2019
47. Abaqus analysis user's manual (2010), vol IV. Dassault Systèmes (Abaqus), Providence, RI, USA
48. Kindmann R, Uphoff H (2014) FE buckling - Ideal buckling stresses of rectangular buckling fields. In German: FE-Beulen - Ideale Beulspannungen von rechteckigen Beulfeldern. Lehrstuhl für Stahl-, Holz-und Leichtbau; Fakultät für Bau-und Umweltingenieurwissenschaften; Ruhr-Universität Bochum. https://www.ruhr-uni-bochum.de/stahlbau/mam/software/5._fe-beulen.pdf. Accessed 14.05.2019 2019
49. DIfNe V (2017) DIN EN 1993-1-5 - design of steel structures - part 1–5; plated structural elements. Beuth Verlag GmbH, Berlin
50. Kang J-H, Leissa AW (2005) Exact solutions for the buckling of rectangular plates having linearly varying in-plane loading on two opposite simply supported edges. Int J Solids Struct 42(14):4220–423810.1016/j.ijsolstr.2004.12.011 ↗
51. Siebel E, Beisswänger H (1955) Deep drawing. In German: Tiefziehen. C. Hanser, München
52. Darendeliler H, Akkök M, Yücesoy CA (2002) Effect of variable friction coefficient on sheet metal drawing. Tribol Int 35(2):97–10410.1016/S0301-679X(01)00099-8 ↗
53. Lange K (1985) Handbook of metal forming. McGraw-Hill Book Company, New York
54. Swift HW (1952) Plastic instability under plane stress. J Mech Phys Solids 1(1):1–1810.1016/0022-5096(52)90002-1 ↗
55. Recklin V, Dietrich F, Groche P (2018) Influence of test stand and contact size sensitivity on the friction coefficient in sheet metal forming. Lubricants 6(2):4110.3390/lubricants6020041 ↗