Estimation of heat flux at metal-mold interface during solidification of cylindrical casting
Source abstract
Abstract
For modeling solidification process of casting accurately, the correct information about the heat flux boundary condition is required. In this study, an inverse heat conduction model is established to determine the interfacial heat flux at metal-mold in the process of casting with a cylindrical geometry. The numerically calculated temperature is compared with the exact solution and simulation solution obtained by commercial software ProCAST to investigate the accuracy of forward heat conduction model. The analysis of calculated heat flux indicates that the inverse model may be taken as a feasible and effective tool for the estimation of the metal-mold interfacial heat flux during solidification of cylindrical casting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Nowak I, Smolka J, Nowak AJ (2010) An effective 3-D inverse procedure to retrieve cooling conditions in an aluminum alloy continuous casting problem. Appl Therm Eng 30:1140–115110.1016/j.applthermaleng.2010.01.029 ↗
2. Zhang LQ, Li LX, Ju H, Zhu BW (2010) Inverse identification of interfacial heat transfer coefficient between the casting and metal mold using neural network. Energy Convers Manag 51:1898–190410.1016/j.enconman.2010.02.020 ↗
3. Sun HC, Chao LS (2007) Analysis of interfacial heat transfer coefficient of green sand mold casting for aluminum and tin-lead alloys by using a lump capacitance method. J Heat Transf 129:595–60010.1115/1.2709975 ↗
4. Guo ZP, Xiong SM, Cho SH, Choi JK (2007) Study on heat transfer behavior at metal/die interface in aluminum alloy die casting process. Acta Metall Sin 11:1149–1154
5. Rajaraman R, Velraj R (2008) Comparison of interfacial heat transfer coefficient estimated by two different techniques during solidification of cylindrical aluminum alloy casting. Heat Mass Transfer 44:1025–103410.1007/s00231-007-0335-7 ↗
6. Nallathambi AK, Specht E (2009) Estimation of heat flux in array of jets quenching using experimental and inverse finite element method. J Mater Process Technol 209:325–33210.1016/j.jmatprotec.2009.04.001 ↗
7. Arunkumar S, Rao KVS, Kumar TSP (2008) Spatial variation of heat flux at the metal mold interface due to mold filling effects in gravity die-casting. Int J Heat Mass Transf 51:676–68510.1016/j.ijheatmasstransfer.2007.10.020 ↗
8. Sui DS, Cui ZS (2009) Application of orthogonal experimental design and Tikhonov regularization method for the identification of parameters in the casting solidification process. Acta Metall Sin 22:13–2110.1016/S1006-7191(08)60065-4 ↗
9. Gadala MS, Xu FC (2006) An FE-based sequential inverse algorithm for heat flux calculation during impingement water cooling. Int J Numer Methods Heat Fluid Flow 16:356–38510.1108/09615530610649762 ↗
10. Chen WL, Yang YC, Lee HL (2007) Inverse problem in determining convection heat transfer coefficient of an annular fin. Energy Convers Manag 48:1081–108810.1016/j.enconman.2006.10.016 ↗
11. Silva JN, Moutinho DJ, Moreira AL, Ferreira IL et al (2011) Determination of heat transfer coefficients at metal-mold interface during horizontal unsteady-state directional solidification of Sn-Pb alloys. Mater Chem Phys 130:179–18510.1016/j.matchemphys.2011.06.032 ↗
12. Gafur MA, Nasrul Haque M, Narayan Prabhu K (2003) Effect of chill thickness and superheat on casting-chill interfacial heat transfer during solidification of commercially pure aluminum. J Mater Process Technol 133:257–26510.1016/S0924-0136(02)00459-4 ↗
13. Long A, Thornhill D, Armstrong C et al (2011) Determination of the heat transfer coefficient at the metal-die interface for high pressure die cast AlSi9Cu3Fe. Appl Therm Eng 31:3996–400610.1016/j.applthermaleng.2011.07.052 ↗
14. Dong YW, Bu K, Dou YQ et al (2011) Determination of interfacial heat-transfer coefficient during investment-casting process of single-crystal blades. J Mater Process Technol 211:2123–213110.1016/j.jmatprotec.2011.07.012 ↗
15. Spinelli JE, Cheung N, Goulart PR et al (2012) Design of mechanical properties of Al-alloys chill castings based on the metal/mold interfacial heat transfer coefficient. Int J Therm Sci 51:145–15410.1016/j.ijthermalsci.2011.08.014 ↗