Effect of temper rolling on the mechanical behaviour of thin steel sheets under monotonous and reverse simple shear tests
Source abstract
Abstract
Temper rolling is performed on ferritic steel thin sheets after cold rolling and annealing, in order to increase the material strength and to obtain the correct roughness and a good flatness. However, depending on the thickness reduction and on the material composition, this operation may induce specific strain-path changes effects during subsequent forming processes. This paper focuses on the analysis of the hardening behaviour during simple shear tests. The results are discussed in relation with the material compositions, the initial anisotropy and the macroscopic strain heterogeneities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Pepelnjak T, Barisic B (2007) Analysis and elimination of the stretcher strains on TH415 tinplate rings in the stamping process. J Mater Process Technol 186:111–11910.1016/j.jmatprotec.2006.12.025 ↗
2. Wilson DV, Bate PS (1994) Influences of cells walls and grain boundaries on transient responses on an IF steel to changes in strain path. Acta Metall Materiala 42:1099–111110.1016/0956-7151(94)90127-9 ↗
3. Rauch EF, Schmitt JH (1989) Dislocations substructures in mild steel deformed in simple shear. Mater Sci Eng A113:441–44810.1016/0921-5093(89)90331-6 ↗
4. Genevois P (1992) Etude expérimentale et modélisation du comportement plastique anisotrope des tôles d’acier en grandes déformations. Thèse de Doctorat, Institut Polytechnique de Grenoble
5. Bouvier S, Gardey B, Haddadi H, Teodosiu C (2006) Characterization of the strain-induced plastic anisotropy of rolled sheets by using sequences of simple shear and uniaxial tensile tests. J Mater Process Technol 174:115–12610.1016/j.jmatprotec.2005.04.086 ↗
6. Bouvier S, Alves JL, Oliveira MC, Menezes LF (2005) Modelling of anisotropic work hardening behaviour of metallic materials subjected to strain- path changes. Comput Mater Sci 32:301–31510.1016/j.commatsci.2004.09.038 ↗
7. Gaspérini M, Swiatnicki W (2003) Plastic localisation by macroscopic shear banding during shear tests of heavily cold rolled aluminium alloys. J Probl Mater Sci 33:88–95
8. Rauch EF (1998) Plastic anisotropy of sheet metals determined by simple shear tests. Mater Sci Eng A241:179–18310.1016/S0921-5093(97)00486-3 ↗
9. Bouvier S, Haddadi H, Levée P, Teodosiu C (2006) Simple shear tests: experimental techniques and characterization of the plastic anisotropy of rolled sheets at large strains. J Mater Process Technol 172:96–10310.1016/j.jmatprotec.2005.09.003 ↗
10. Schmitt JH, Aernoudt E, Baudelet B (1985) Yield loci for polycristalline metals without texture. Mater Sci Eng 75:13–2010.1016/0025-5416(85)90173-9 ↗