A 3D study of the influence of friction on the Adiabatic Shear Band formation during High Speed Machining
Source abstract
Abstract
Adiabatic Shear Band (ASB) may form at very high speeds with materials having poor thermal conductivity. It results from the competition between plastic hardening and strain softening and initiates when the latter becomes predominant. Because of high speeds, the heat created does not have sufficient time to propagate, leading to the formation of high strain localized zones. Starting from a previous description of the ASB formation process where the friction phenomenon has been considered as negligible, the aim of this paper is to describe the influence of the latter on the ASB formation process. Consequently, using a very general 3D finite element code where mesh adaptation is triggered by an error estimator within an Arbitrary Lagrangian Eulerian formulation, the formation of several ASB has been simulated in 3D High Speed Machining taking friction into account. The results obtained allow proposing a description of its influence on both the ASB build up process and the final chip geometry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Metal Forming Simulation Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. T.W. Wright, G.K. Batchelor, L.B. Freud, The Physics and Mathematics of Adiabatic Shear Bands, Cambridge University Press (2002).
2. F. Delalondre, S. Guerdoux, L. Fourment, 3 D Simulation of Adiabatic Shear Bands in High Speed Machining, Proceeding of the 9th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM), Porto , June 17-21 (2007).10.1063/1.2740963 ↗
3. F. Delalondre, L. Fourment, A Study of Adiabatic Shear Band Formation During High Speed Machining Using 3D Finite Element Simulation, Proceeding of the 10th International Workshop Modeling of Machining Operations (CIRP), Reggio Calabria, August 27-28, (2007).10.1063/1.2740963 ↗
4. F. Delalondre, S. Guerdoux, L. Fourment, 3D Simulation of High Speed Orthogonal Metal Cutting with Adiabatic Shearing, in preparation (2008).
5. D.R.J. Owen, M. Vaz. Jr., Computational Techniques Applied to High Speed Machining under Strain Localization Conditions, Comp. Meth. In App. Mech. And Eng., 1, 171:445-461 (1999).10.1016/S0045-7825(98)00220-5 ↗
6. M. Bäker, J. Rösler, C. Siemers, A Finite Model of High Speed Metal Cutting with Adiabatic Shearing, Comp. and Struct., 80:495-513 (2002).10.1016/S0045-7949(02)00023-8 ↗
7. J.F. Molinari, M. Ortiz, Three-Dimensional Adaptive Meshing by Subdivision and Edge-Collapse in Finite-Deformation Dynamic-Plasticity Problems with Application to Adiabatic Shear Banding, Int. J. for Num. Meth. in Eng., 53:1101-1126 (2001).10.1002/nme.325 ↗
8. Y. Guetari, P. Guegan, A. Poitou, An Experimental Investigation of Orthogonal Cutting, International Journal of Forming Processes, 9/4:473-490 (2006).10.3166/ijfp.9.473-489 ↗
9. M. Bäker, Finite Element Investigation of the Flow Stress Dependance of Chip Formation, Journal of Materials Processing Technology 167:1-13 (2005)10.1016/j.jmatprotec.2004.09.076 ↗
10. M. Bäker, The Influence of Plastic Properties on Chip Formation, 28:556-562 (2003)10.1016/j.commatsci.2003.08.013 ↗
11. N. Ranc, Etude des Champs de Température et de Déformation dans les Matériaux Métalliques Sollicités à Grande Vitesse de Déformation, PhD Thesis of Paris X – Nanterre (2006)