New trends in sheet metal forming analysis and optimization trough the use of optical measurement technology to control springback
Source abstract
Abstract
The use of optical measurement equipment and software based on photogrammetry is becoming more affordable and is increasing their reliability in presenting results on surfaces topography as well as strain distribution. The question is, how feasible can their support be to the process/product development engineer in the choice of the right auto body-in-white (BIW) component design; how can they influence blank and tool geometries, process parameters and moreover the right material selection, in order to reduce the springback of such materials on drawing, reaching the required quality standards for the part. This paper describes some industrial cases on how these new techniques can be applied to lay out industrial deep drawing processes, accomplished by the use of optical measurement, improving design and process issues.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser and Thermal Forming Techniques · Advanced Measurement and Metrology Techniques · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Damoulis GL, Batalha GF (2004) Development of Industrial Sheet Metal Forming Process Using Computer Simulation as Integrated Tool in the Car Body Development. Sci Eng J 13:33–39
2. Damoulis GL, Batalha GF, Schwarzwald RC(2004) New Trends in Computer Simulation as Integrated Tool for Automotive Components Development“, NUMIFORM, Ohio 2003 In: S. Ghosh, J.M. Castro, J.K. Lee (eds). Proc. NUMIFORM 2004. Columbus. 1:2103-2107
3. Haug E, Pascale EDI, Pickett AK, Ulrich D (1991) Industrial Sheet Metal Forming Simulation Using Explicit FEM, VDI Bericht, Nr. 894, Germany
4. Batalha GF, Stipkovic Filho M (2001) Quantitative characterization of the surface topography of cold rolled sheets – new approaches and possibilities. J Mater Process Technol 113:732–73810.1016/S0924-0136(01)00607-0 ↗
5. Batalha GF, Stipkovic Filho M (2000) Estimation of the Contact Conditions and its Influences on the Interface Friction in Forming Processes, In: Pietrzyk, M. et al. (eds). Proc. 8th Metal Forming 2000. Krakow, A. A. Balkema, 71–78.
6. Damoulis GL, Gomes E, Batalha GF (2008) The Industrial Sheet Metal Forming Process Using the Forming Limit Diagram (FLD) through Computer Simulation as Integrated in Car Body Development. Int J Mechatron Manuf Syst 1(2/3):264–81
7. Hill R (1948) A Theory of the Yielding and Plastic Flow of Anisotropic Metals. Proc Roy Soc A, p. 193.
8. Hill R (1990) Constitutive Modeling orthotropic plasticity in sheet metals. J Mech Phys Solids 38(3):405–41710.1016/0022-5096(90)90006-P ↗
9. H. Berg and P. Hora, Simulation of sheet metal forming process using different anisotropic constitutive models, In: Hutink & Baijens (eds). Proc. NUMIFORM 98, Rotterdam, 1998, 405–17.
10. Maziliu LS, Kurr J (1990) Anisotropy Evolution by Cold Prestrained Metals Described by ICT-Theory. J Mater Process Technol 24:303–31110.1016/0924-0136(90)90191-V ↗
11. Keeler SP (1965) Determination of Forming Limits in Automotive Stampings. Sheet Met Ind 9:357–361 & 364
12. G. M. Goodwin, Application of Strain Analysis to Sheet Metal Forming Problems in the Press Shop, La Metallurgia Italiana, n. 8, (1968), pp. 767-74 / SAE Paper No. 680093, (Jan 1968).10.4271/680093 ↗
13. Swift HW (1952) Plastic Instability under Plane Stress. J Mech Phys Solids 1:1–1810.1016/0022-5096(52)90002-1 ↗
14. K. Galanulis, Optical Measuring Technologies in Sheet Metal Processing, GOM Gesellschaft für Optische Messtechnik GmbH. (2007)
15. T. Schmiedt, J. Tyson and K. Galanulis, Total Area Strain Mapping Improves Total Quality of Stampings“. GOM—Gesellschaft für Optische Messtechnik GmbH, (2007).
16. D. Behring, J. Thesing, H. Becker and R. Zobel, Optical Coordinate Measuring Techniques for the Determination and Visualization of 3D Displacements in Crash Investigations. GOM—Gesellschaft für Optische Messtechnik GmbH, (2007).