Prediction of necking for two aluminum alloys under non-proportional loading by using an FE-based approach
Source abstract
Abstract
Forming Limit Diagrams (FLDs) were found numerically for sheets under non-proportional loading by means of an FE-based Marciniak–Kuczynski (M-K) analysis. The material model used in the analysis includes two instability criteria; a non-local criterion to detect incipient localized necking and a through-thickness shear instability criterion. The objective was to study whether the effects of pre-straining on the FLD could be predicted by the chosen modeling approach, and compare the results from the two instability criteria. The results with the two criteria were different, but both criteria were able to capture the strong strain-path dependence of the FLDs as the governing phenomenon is plastic instability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Marciniak Z, Kuczynski K (1967) Limit strains in the process of stretch-forming sheet metal. Int J Mech Sci 9:600–62010.1016/0020-7403(67)90066-5 ↗
2. Graf A, Hosford WF (1990) Calculations of forming limit diagrams. Met Trans A 21A:87–89410.1007/BF02656427 ↗
3. Samuel M (2004) Numerical and experimental investigations of forming limit diagrams in metal sheets. J Mater Process Technol 153–154:424–43110.1016/j.jmatprotec.2004.04.095 ↗
4. Lademo O-G, Berstad T, Hopperstad OS, Pedersen KO (2004) A numerical tool for formability analysis of aluminium alloys. Part I: theory. Steel Grips 2:427–431
5. Lademo O-G, Pedersen KO, Berstad T, Hopperstad OS (2004) A numerical tool for formability analysis of aluminium alloys. Part II: experimental validation. Steel Grips 2:433–437
6. Abedrabbo N, Pourboghrat F, Carsley J (2006) Forming of aluminum alloys at elevated temperatures—part 2: numerical modeling and experimental verification. Int J Plast 22:342–37310.1016/j.ijplas.2005.03.006 ↗
7. Butuc MC, Banabic D, Barata da Rocha A, Gracio JJ, Ferreira Duarte J, Jurco P, Comsa DS (2002) The performance of Yld96 and BBC2000 yield functions in forming limit prediction. J Mater Process Technol 125–126:281–28610.1016/S0924-0136(02)00399-0 ↗
8. Wu PD, Jain M, Savoie J, MacEwen SR, Tugcu P, Neale KW (2003) Evaluation of anisotropic yield functions for aluminum sheets. Int J Plast 19:121–13810.1016/S0749-6419(01)00033-X ↗
9. Graf A, Hosford W (1993) Effect of Changing Strain Paths on Forming Limit Diagrams of Al 2008-T4. Met Trans A 24:2503–251210.1007/BF02646529 ↗
10. Graf A, Hosford W (1994) Influence of strain-path changes on forming limit diagrams of Al 6111 T4. Int J Mech Sci 36:897–891010.1016/0020-7403(94)90053-1 ↗
11. Cao J, Yao H, Karafillis A, Boyce MC (2000) Prediction of localized thinning in sheet metal using a general anisotropic yield criterion. Int J Plast 16:1105–112910.1016/S0749-6419(99)00091-1 ↗
12. Karafillis A, Boyce M (1993) General anisotropic yield criterion using bounds and a transformation weighting tensor. J Mech Phys Solids 41:1859–1188610.1016/0022-5096(93)90073-O ↗
13. Yao H, Cao J (2002) Prediction of forming limit curves using an anisotropic yield function with prestrain induced backstress. Int J Plast 18:1013–103810.1016/S0749-6419(01)00022-5 ↗
14. Chow CL, Yu LG, Tai WH, Demeri MY (2001) Prediction of forming limit diagrams for AL6111-T4 under non-proportional loading. Int J Mech Sci 43:471–48610.1016/S0020-7403(99)00123-X ↗
15. Stoughton TB (2000) General forming limit criterion for sheet metal forming. Int J Mech Sci 42:1–1710.1016/S0020-7403(98)00113-1 ↗
16. Wu PD, Graf A, MacEwen SR, Lloyd DJ, Jain M, Neale KW (2005) On forming limit stress diagram analysis. Int J Solids Struct 42:2225–224110.1016/j.ijsolstr.2004.09.010 ↗
17. Yoshida K, Kuwabara T, Kuroda M (2007) Path-dependence of the forming limit stresses in a sheet metal. Int J Plast 23:361–38410.1016/j.ijplas.2006.05.005 ↗
18. Bai Y, Wierzbicki T (2008) Forming severity concept for predicting sheet necking under complex loading histories. Int J Mech Sci 50:1012–102210.1016/j.ijmecsci.2008.02.010 ↗
19. Berstad T, Lademo O-G, Pedersen KO (2004) Formability modeling with LS-DYNA, 8th LS-DYNA International Users Conference. Detroit
20. Berstad T, Hopperstad OS, Lademo O-G (2002) FLD calculator—a tool for calculation of foming limit diagrams with LS-DYNA, Report No. STF24 F02285 (Proprietary). SINTEF, Trondheim
21. Kokkula S, Hopperstad OS, Lademo O-G, Berstad T, Langseth M (2006) Offset impact behaviour of bumper beam-longitudinal systems: numerical simulations. Int J Crashworthiness 11:317–33610.1533/ijcr.2005.0106 ↗
22. Lademo O-G, Berstad T, Eriksson M, Tryland T, Furu T, Hopperstad OS, Langseth M (2008) A model for process-based crash simulation. Int J Impact Eng 35:376–38810.1016/j.ijimpeng.2007.03.004 ↗
23. Fyllingen Ø, Hopperstad OS, Lademo O-G, Langseth M (2008) Estimation of forming limit diagrams by use of the finite element method and Monte Carlo simulation. Comput Struct (in press). doi: 10.1016/j.compstruc.2008.07.00210.1016/j.compstruc.2008.07.002 ↗
24. Reyes A, Hopperstad OS, Lademo O-G, Langseth M (2006) Modeling of textured aluminum alloys used in a bumper system: material tests and characterization. Comput Mater Sci 37:246–26810.1016/j.commatsci.2005.07.001 ↗
25. Bressan JD, Williams JA (1983) The use of a shear instability criterion to predict local necking in sheet metal deformation. Int J Mech Sci 25:155–16810.1016/0020-7403(83)90089-9 ↗
26. Hopperstad OS, Berstad T, Lademo O-G, Langseth M (2006) Shear instability criterion for plastic anisotropy, Report no STF80MK F06087. SINTEF, Trondheim
27. Barlat F, Lian J (1989) Plastic behavior and stretchability of sheet metals. Part I: a yield function for orthotropic sheets under plane stress conditions. Int J Plast 5:51–6610.1016/0749-6419(89)90019-3 ↗
28. Belytchko T, Liu WK, Moran B (2000) Nonlinear finite elements for continua and structures. Wiley, Chichester
29. Lemaitre J, Chaboche J-L (1990) Mechanics of solid materials. Cambridge University Press, Cambridge10.1017/CBO9781139167970 ↗
30. Lademo O-G (1999) Engineering models of elastoplasticity and fracture for aluminium alloys, Doctoral thesis. Norwegian University of Science and Technology, Trondheim
31. Lademo O-G, Hopperstad OS, Langseth M (1999) An evaluation of yield criteria and flow rules for aluminum alloys. Int J Plast 15:191–120810.1016/S0749-6419(98)00064-3 ↗
32. Hooputra H, Gese H, Dell H, Werner H (2004) A comprehensive failure model for crashworthiness simulation of aluminium extrusions. Int J Crashworthiness 9:449–46410.1533/ijcr.2004.0289 ↗
33. Jain M, Allin J, Lloyd DJ (1999) Fracture limit prediction using ductile fracture criteria for forming of an automotive aluminum sheet. Int J Mech Sci 41:1273–128810.1016/S0020-7403(98)00070-8 ↗
34. Han HN, Kim K-H (2003) A ductile fracture criterion in sheet metal forming process. J Mater Process Technol 142:231–23810.1016/S0924-0136(03)00587-9 ↗
35. Cockcroft MG, Latham DJ (1968) Ductility and the workability of metals. J Inst Met 96:33–39
36. Brunet M, Clerc P (2007) Two prediction methods for ductile sheet metal failure In: Cueto E, Chinesta F (eds), CP907, 10th ESAFORM Conference on Material Forming. American Institute of Physics10.1063/1.2729528 ↗
37. Alsos HS, Hopperstad OS, Tornqvist R, Amdahl J (2008) Analytical and numerical analysis of sheet metal instability using a stress based criterion. Int J Solids Struct 45:2042–205510.1016/j.ijsolstr.2007.11.015 ↗
38. Hill R (1952) On discontinuous plastic states, with special reference to localized necking in thin sheets. J Mech Phys Solids 1:19–3010.1016/0022-5096(52)90003-3 ↗
39. Hill R (1950) Mathematical theory of plasticity. Oxford University Press, Oxford
40. van Minh H, Sowerby R, Duncan JL (1974) Variability of forming limit curves. Int J Mech Sci 16:31–3210.1016/0020-7403(74)90031-9 ↗
41. Rojek J, Kleiber M, Piela A, Stocki R, Knabel J (2004) Deterministic and stochastic analysis of failure in sheet metal forming operations. Steel Grips 2:29–34
42. Pedersen K, Lademo O-G, Hopperstad OS (2004) Strain localisation in extruded sheets, Report No. STF80MK 05167 (Proprietary). SINTEF, Trondheim