Testing of a novel CrNiCo alloy for tooling applications in semi-solid processing of steels
Source abstract
Abstract
Semisolid processing which has become a well established manufacturing route for the production of intricate, thin-walled aluminium and magnesium parts with mechanical properties as good as forged grades, faces a major challenge in the case of steels. The tool materials must withstand the complex load profile and relatively higher forming temperatures which promote chemical interaction with steel slurries. Thixoforming tools ought to last thousands of forming cycles for industrial application to be attractive. Hot work tool steel dies proved to be entirely inadequate when thixoforming steels. In spite of extensive research on tool materials for the semisolid processing of steels, there is yet no material to fulfil this critical role. The present work was undertaken to explore the potential of a novel CrNiCo alloy as the tooling material in semisolid processing of steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Bobzin K, Lugscheider E, Maes M, Immich P (2006) Solid State Phenomena 116–117:70410.4028/www.scientific.net/SSP.116-117.704 ↗
2. Flemings MC (2000) Proc. 6th Int. Conf.On Semi-Solid Processing of Alloys and Composites, Turin, 11–14
3. Kopp R, Kallweit J, Moller T, Seidl I (2002) J. Mater. Process Technol. 130–131:56210.1016/S0924-0136(02)00766-5 ↗
4. Lugscheider E, Bobzin K, Barimani C, Barwulf St, Hornig Th (2000) Adv Eng Mater 2:3310.1002/(SICI)1527-2648(200002)2:1/2<33::AID-ADEM33>3.0.CO;2-J ↗
5. Muenstermann S, Uibel K, Tonnesen T, Telle R (2006) Solid State Phenomena 116–117:69610.4028/www.scientific.net/SSP.116-117.696 ↗
6. Omar MZ, Palmiere EJ, Howe AA, Atkinson HV, Kapranos P (2005) Mater Sci Eng Vol 395:5310.1016/j.msea.2004.12.013 ↗
7. Lugscheider E, Hornig Th, Neuschutz D, Kyrylov O, Prange R (2000) Proc. 6th Int. Conf.On Semi-Solid Processing of Alloys and Composites, Turin, 587–592
8. Telle R, Muenstermann S, Beyer C (2006) Solid State Phenomena 116–117:69010.4028/www.scientific.net/SSP.116-117.690 ↗
9. Behrens B-A, Fischer D, Haller B, Rassili A, Klemm H, Flüß A, Walkin B, Karlsson M, Robelet M, Cucatto A (2004) Proc. 8th Intern. Conference on Semi-Solid Processing of Alloys and Composites (S2P), Limassol, Cyprus, Sept. 21-23rd
10. Rassili A et al. (2004) Proc. 8th Intern. Conference on Semi-Solid Processing of Alloys and Composites (S2P), Limassol, Cyprus, Sept. 21–23rd
11. Kapranos P, Kirkwood DH, Sellars CM (1996) Proc. 4th Intern. Conference on Semi-Solid Processing of Alloys and Composites. The University of Sheffield, Sheffield, p 306
12. Kopp R, Lugscheider E, Hornig T, Kallweit J, Maes M, Seidl I (2002) Proceedings of the Fifth International ESAFORM Conference on Material Forming, Akapit, Krakow, Poland, 659
13. Kapranos P, Kirkwood DH, Sellars CM (1993) J Eng Manuf, B 207:110.1243/PIME_PROC_1993_207_055_02 ↗
14. Kopp R, Kallweit J, Moller T, Seidl I (2002) J. Mater Process Technol 130:56210.1016/S0924-0136(02)00766-5 ↗
15. Peters DT, Brush EF, Cowie JG, Midson SP (2002) Die Casting Toward the Future, North American Die Casting Association, T02-065
16. Riley FL (2000) J Am Ceram Soc. Vol. 83:245
17. Schwam D, Wallace JF, Bircenau S (2002) Die Materials For Critical Applications and Increased Production Rates, DE-FC07-98ID13693
18. Birol Y, Steel Research International, doi: 10.2374/SRI08SP061 .
19. Andreis G, Fuchs K-D, Schruff I (1999) in Proceedings of the Fifth International Conference on Tooling, Loeben, 593–600
20. Jean S, Miquel B, LeRoux S, Lamesle P, Rezai-Aria F (2001) in Proceedings of SF2M of Temperature–Fatigue Interaction,
21. Doege E, Nägele H, Schliephake U (1994) Proc Inst Mech Eng B: J Eng Manuf 208:111–11910.1243/PIME_PROC_1994_208_067_02 ↗
22. Delagnes D, Rezai-Aria F, Levaillant C, Grellier A (1999) in Proceedings of the Fifth International Conference on Tooling, Loeben, 195–204.