Enhancing wear resistance of 05Cr17Ni4Cu4Nb stainless steel via nanostructured ceramic particles-induced nano-copper precipitation
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Jin J-B, Zhou S, Yang H, Yang J, Zhang Z, Guo B, Zhang L-C (2025) Breaking through the strength-ductility trade-off of LPBF-produced Ti-xNb alloys from mixed powders via ω-phase induced heterostructure. Int J Extreme Manuf 7:065003. https://doi.org/10.1088/2631-7990/aded4e10.1088/2631-7990/aded4e ↗
2. Ali A, Hafez W (2023) Overcoming Challenges in the Powder Metallurgy Process of Metal Matrix Composites. SVU-International J Eng Sci Appl 5:13–18. https://doi.org/10.21608/svusrc.2023.228672.114410.21608/svusrc.2023.228672.1144 ↗
3. Xu X, Du J, Lu H, Su Y, Xing F, Luo K, Lu J (2024) High-performance functional coatings manufactured by integrated extremely high-speed-rate laser directed energy deposition with interlayer remelting. Int J Mach Tools Manuf 200:10417410.1016/j.ijmachtools.2024.104174 ↗
4. Lv J, Liang Y, Xu X, Xu G, Zhang H, Lu H, Luo K, Cai J, Lu J (2024) Performance-control-orientated hybrid metal additive manufacturing technologies: state of the art, challenges, and future trends. Int J Extreme Manuf 6:032009. https://doi.org/10.1088/2631-7990/ad331510.1088/2631-7990/ad3315 ↗
5. Li J, Liu Z (2024) Optimization design and interface characteristics research of high damping NiTi - Nickel-Aluminum Bronze functional gradient composite coating additively manufactured by high-speed laser-directed energy deposition. Surf Coat Technol 493:131280. https://doi.org/10.1016/j.surfcoat.2024.13128010.1016/j.surfcoat.2024.131280 ↗
6. Blakey-Milner B, Gradl P, Snedden G, Brooks M, Pitot J, Lopez E, Leary M, Berto F (2021) du Plessis, Metal additive manufacturing in aerospace: A review. Mater Design 209:110008. https://doi.org/10.1016/j.matdes.2021.11000810.1016/j.matdes.2021.110008 ↗
7. Wang C, Tan XP, Tor SB, Lim CS (2020) Machine learning in additive manufacturing: State-of-the-art and perspectives. Additive Manuf 36:101538. https://doi.org/10.1016/j.addma.2020.10153810.1016/j.addma.2020.101538 ↗
8. Zhang P, Li Y, Tong Y, Hu Y, Wang J, Liang X, Lan H, Zhang M, Mao C, Wang K (2025) Additive manufacturing of hard and crack-freeTiC-based cermets. Ceram Int 51:24618–24627. https://doi.org/10.1016/j.ceramint.2025.03.14410.1016/j.ceramint.2025.03.144 ↗
9. Li K, Yang J, Yi Y, Liu X, Liu Y, Zhang L-C, Zhang W, Li W, Chen D, Zhou S (2023) Enhanced strength-ductility synergy and mechanisms of heterostructured Ti6Al4V-Cu alloys produced by laser powder bed fusion. Acta Mater 256:119112. https://doi.org/10.1016/j.actamat.2023.11911210.1016/j.actamat.2023.119112 ↗
10. Xia C, Pan Z, Polden J, Li H, Xu Y, Chen S, Zhang Y (2020) A review on wire arc additive manufacturing: Monitoring, control and a framework of automated system. J Manuf Syst 57:31–45. https://doi.org/10.1016/j.jmsy.2020.08.00810.1016/j.jmsy.2020.08.008 ↗
11. Ahn D-G (2021) Directed energy deposition (DED) process: state of the art. Int J Precision Eng Manufacturing-Green Technol 8:703–74210.1007/s40684-020-00302-7 ↗
12. Han J, Tang S, Song X, Ge Y, Ma W, Guan J, Zhu K, Li Y, Yu M, Zhang K, Liu X, Li P (2025) The synergistic effect of NbC and TiN addition on the microstructure, mechanical property and corrosion resistance of CoCrFeNiAl coating deposited on 17 – 4 PH substrate via laser cladding. Ceram Int 51:25581–25601. https://doi.org/10.1016/j.ceramint.2025.03.24010.1016/j.ceramint.2025.03.240 ↗
13. Yu DT, Wu CL, Zhang S, Zhang CH, Chen HT, Tao XP (2024) Effects of heat treatment on the nano-indentation, corrosion and cavitation erosion behavior of 17-4PH stainless steel by laser surface melting. Surf Coat Technol 484:130821. https://doi.org/10.1016/j.surfcoat.2024.13082110.1016/j.surfcoat.2024.130821 ↗
14. Mathoho I, Akinlabi ET, Arthur N, Tlotleng M (2020) Impact of DED process parameters on the metallurgical characteristics of 17 – 4 PH SS deposited using DED. CIRP J Manufact Sci Technol 31:450–458. https://doi.org/10.1016/j.cirpj.2020.07.00710.1016/j.cirpj.2020.07.007 ↗
15. Villa M, Grumsen FB, Niessen F, Dahmen T, Cao L, Reich M, Kessler O, Huang X, Somers MAJ (2023) Aging 17 – 4 PH martensitic stainless steel prior to hardening: effects on martensitic transformation, microstructure and properties. Materialia 32:101882. https://doi.org/10.1016/j.mtla.2023.10188210.1016/j.mtla.2023.101882 ↗
16. Wang J, Zou H, Li C, Peng Y, Qiu S, Shen B (2006) The microstructure evolution of type 17-4PH stainless steel during long-term aging at 350°C. Nucl Eng Des 236:2531–2536. https://doi.org/10.1016/j.nucengdes.2006.03.01710.1016/j.nucengdes.2006.03.017 ↗
17. Yeli G, Auger MA, Wilford K, Smith GDW, Bagot PAJ, Moody MP (2017) Sequential nucleation of phases in a 17-4PH steel: Microstructural characterisation and mechanical properties. Acta Mater 125:38–49. https://doi.org/10.1016/j.actamat.2016.11.05210.1016/j.actamat.2016.11.052 ↗
18. Ozsoy A, Aydogan E, Dericioglu AF (2022) Selective laser melting of Nano-TiN reinforced 17 – 4 PH stainless steel: Densification, microstructure and mechanical properties. Mater Sci Engineering: A 836:142574. https://doi.org/10.1016/j.msea.2021.14257410.1016/j.msea.2021.142574 ↗
19. Kim JM, Park JS, Yun HS (2014) Microstructure and Mechanical Properties of TiC Nanoparticle-Reinforced Iron-Matrix Composites. Strength Mater 46:177–182. https://doi.org/10.1007/s11223-014-9533-y10.1007/s11223-014-9533-y ↗
20. Zhang Z, Chen DL (2008) Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites. Mater Sci Eng A 483–484. https://doi.org/10.1016/j.msea.2006.10.18410.1016/j.msea.2006.10.184 ↗
21. Huang C, Zou B, Guo P, Liu Y, Huang C, Wang J (2016) Sliding behavior and wear mechanism of iron and cobalt-based high-temperature alloys against WC and SiC balls. Int J Refract Met Hard Mater 59:40–55. https://doi.org/10.1016/j.ijrmhm.2016.05.00710.1016/j.ijrmhm.2016.05.007 ↗
22. Liu Y, Liu W, Fan H, Zhang Q, Ma Y, Wang F, Zhang H (2025) Role of Nano-TiC particles in enhancing the microstructure and wear resistance of IN718 superalloys fabricated by directed energy deposition. Ceram Int 51:46933–46944. https://doi.org/10.1016/j.ceramint.2025.07.39810.1016/j.ceramint.2025.07.398 ↗
23. Surzhenkov A, Antonov M, Goljandin D, Kulu P, Viljus M, Traksmaa R, Mere A (2016) High-temperature erosion of Fe-based coatings reinforced with cermet particles. Surf Eng 32:624–63010.1080/02670844.2016.1145377 ↗
24. Yan X, Zheng Y, Qiu Y, Qiao G, Du W, He H, Bai Q (2024) Role of reinforcement on the microstructure of WC reinforced Fe-based composite coating prepared by direct energy deposition. Mater Charact 209:113731. https://doi.org/10.1016/j.matchar.2024.11373110.1016/j.matchar.2024.113731 ↗
25. Li Z, Gou H, Zhang Y, Zhang F, Shan Q, Wei H, Yan Z (2024) Microstructure and Abrasive Wear Properties of WC/Fe Matrix Composites Under Different Preform Wall Thicknesses. Int J Metalcast 18:1508–1522. https://doi.org/10.1007/s40962-023-01127-110.1007/s40962-023-01127-1 ↗
26. Nie MH, Zhang S, Wang ZY, Zhang CH, Chen HT, Chen J (2022) Effect of laser power on microstructure and interfacial bonding strength of laser cladding 17-4PH stainless steel coatings. Mater Chem Phys 275:125236. https://doi.org/10.1016/j.matchemphys.2021.12523610.1016/j.matchemphys.2021.125236 ↗
27. Bartkowski D, Bartkowska A, Jurči P (2021) Laser cladding process of Fe/WC metal matrix composite coatings on low carbon steel using Yb: YAG disk laser. Opt Laser Technol 136:106784. https://doi.org/10.1016/j.optlastec.2020.10678410.1016/j.optlastec.2020.106784 ↗
28. Li J, Xiang S, Luan H, Amar A, Liu X, Lu S, Zeng Y, Le G, Wang X, Qu F, Jiang C, Yang G (2019) Additive manufacturing of high-strength CrMnFeCoNi high-entropy alloys-based composites with WC addition. J Mater Sci Technol 35:2430–2434. https://doi.org/10.1016/j.jmst.2019.05.06210.1016/j.jmst.2019.05.062 ↗
29. Rammo NN, Abdulah OG (2006) A model for the prediction of lattice parameters of iron–carbon austenite and martensite. J Alloys Compd 420:117–120. https://doi.org/10.1016/j.jallcom.2005.10.07510.1016/j.jallcom.2005.10.075 ↗
30. Williamson GK, Hall WH (1953) X-ray line broadening from filed aluminium and wolfram. Acta Metall 1:22–31. https://doi.org/10.1016/0001-6160(53)90006-6. https://doi.org/10.1016/0001-6160(53)90006-6 ↗
31. Ghesmati Tabrizi S, Sajjadi SA, Babakhani A, Lu W (2017) Analytical and experimental investigation of the effect of SPS and hot rolling on the microstructure and flexural behavior of Ti6Al4V matrix reinforced with in-situ TiB and TiC. J Alloys Compd 692:734–744. https://doi.org/10.1016/j.jallcom.2016.09.02610.1016/j.jallcom.2016.09.026 ↗
32. Mendoza MY, Samimi P, Brice DA, Martin BW, Rolchigo MR, LeSar R, Collins PC (2017) Microstructures and Grain Refinement of Additive-Manufactured Ti-xW Alloys. Metall Mater Trans A 48:3594–3605. https://doi.org/10.1007/s11661-017-4117-710.1007/s11661-017-4117-7 ↗
33. Chen H, He Y, Dash SS, Zou Y (2024) Additive manufacturing of metals and alloys to achieve heterogeneous microstructures for exceptional mechanical properties. Mater Res Lett 12:149–171. https://doi.org/10.1080/21663831.2024.230526110.1080/21663831.2024.2305261 ↗
34. Chen H, Kosiba K, Suryanarayana C, Lu T, Liu Y, Wang Y, Prashanth KG (2023) Feedstock preparation, microstructures and mechanical properties for laser-based additive manufacturing of steel matrix composites. Int Mater Rev 68:1192–1244. https://doi.org/10.1080/09506608.2023.225866410.1080/09506608.2023.2258664 ↗
35. Vysotskiy I, Malopheyev S, Zuiko I, Mironov S, Kaibyshev R (2022) Microstructure distribution in 17 – 4 PH martensitic steel produced by selective laser melting. Metall Mater Trans 53:4143–4147. https://doi.org/10.1007/s11661-022-06829-510.1007/s11661-022-06829-5 ↗
36. Ren K, Chew Y, Fuh JYH, Zhang YF, Bi GJ (2019) Thermo-mechanical analyses for optimized path planning in laser aided additive manufacturing processes. Mater Design 162:80–93. https://doi.org/10.1016/j.matdes.2018.11.01410.1016/j.matdes.2018.11.014 ↗
37. Xiong XC, Chen B, Huang MX, Wang JF, Wang L (2013) The effect of morphology on the stability of retained austenite in a quenched and partitioned steel. Scripta Mater 68:321–324. https://doi.org/10.1016/j.scriptamat.2012.11.00310.1016/j.scriptamat.2012.11.003 ↗
38. Kokawa H, Koyanagawa T, Shimada M, Sato YS, Kuwana T (2000) Dependence of Carbide Precipitation on Grain Boundary Structure in Sensitized Austenitic Stainless Steel. In: Meike A, Gonis A, Turchi PEA, Rajan K (eds) Properties of Complex Inorganic Solids, vol 2. Springer US, Boston, MA, pp 17–2610.1007/978-1-4615-1205-9_2 ↗
39. Deng D, Chen R, Sun Q, Li X (2015) Microstructural Study of 17-4PH Stainless Steel after Plasma-Transferred Arc Welding, Materials, pp. 424–43410.3390/ma8020424 ↗
40. Li J, Zhu Z, Peng Y, Shen G (2021) Phase evolution and wear resistance of in-situ synthesized (Cr, W)23C6-WC composite ceramics reinforced Fe-based composite coatings produced by laser cladding. Vacuum 190:110242. https://doi.org/10.1016/j.vacuum.2021.11024210.1016/j.vacuum.2021.110242 ↗
41. Cao T, Cheng C, Ye F, Xv H, Zhao J (2020) Relationship between carbon segregation and the carbide precipitation along grain boundary based on the structural unit model. J Mater Sci 55:7883–7893. https://doi.org/10.1007/s10853-020-04537-210.1007/s10853-020-04537-2 ↗
42. Lu H, Zhang X, Liu J, Zhao S, Lin X, Li H, Hu Y (2022) Study on laser shock modulation of melt pool in laser additive manufacturing of FeCoCrNi high-entropy alloys. J Alloys Compd 925:166720. https://doi.org/10.1016/j.jallcom.2022.16672010.1016/j.jallcom.2022.166720 ↗
43. Ren N, Li J, Zhang R, Panwisawas C, Xia M, Dong H, Li J (2023) Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing. Nat Commun 14:7990. https://doi.org/10.1038/s41467-023-43563-x10.1038/s41467-023-43563-x ↗
44. Gao J, Lan H, Jiang Q, Chen S, Xu Z, Yu Y, Du X, Cai L (2025) Mechanisms of Hardness Variation in 14Cr12Ni3Mo2VN Martensitic Stainless Steel Under Different Tempering. Temperatures Following High-Frequency Induction Quenching, Coatings
45. Ma Y, Naeem M, Zhu L, He H, Sun X, Yang Z, He F, Harjo S, Kawasaki T, Wang X-L (2024) Microscopic insights of the extraordinary work-hardening due to phase transformation. Acta Mater 270:119822. https://doi.org/10.1016/j.actamat.2024.11982210.1016/j.actamat.2024.119822 ↗
46. Zhi H, Li J, Li W, Elkot M, Antonov S, Zhang H, Lai M (2023) Simultaneously enhancing strength-ductility synergy and strain hardenability via Si-alloying in medium-Al FeMnAlC lightweight steels. Acta Mater 245:118611. https://doi.org/10.1016/j.actamat.2022.11861110.1016/j.actamat.2022.118611 ↗
47. Li Z, Xie D, liu Y, Lv F, Zhou K, Jiao C, Gao X, Wang D, Liu Y, Zu H, Shen L (2024) Effect of WC on the microstructure and mechanical properties of laser-clad AlCoCrFeNi2.1 eutectic high-entropy alloy composite coatings. J Alloys Compd 976:173219. https://doi.org/10.1016/j.jallcom.2023.17321910.1016/j.jallcom.2023.173219 ↗
48. Bokeloh J, Wilde G (2014) High-Precision Nucleation Rate Measurements for Higher Melting Metals. JOM 66:1512–1519. https://doi.org/10.1007/s11837-014-1027-710.1007/s11837-014-1027-7 ↗
49. Park SB (2022) Heterogeneous nucleation models to predict grain size in solidification. Prog Mater Sci 123:100822. https://doi.org/10.1016/j.pmatsci.2021.10082210.1016/j.pmatsci.2021.100822 ↗
50. Zheng H-Y, Wang M, Wang X-X, Huang W-D (2011) Analysis of heterogeneous nucleation on rough surfacesbased on Wenzel model. Acta Phys Sinica 60:066402–066402. https://doi.org/10.7498/aps.60.06640210.7498/aps.60.066402 ↗
51. Chen H, Gu D, Zhang H, Xi L, Lu T, Deng L, Kühn U, Kosiba K (2021) Novel WC-reinforced iron-based composites with excellent mechanical properties synthesized by laser additive manufacturing: Underlying role of reinforcement weight fraction. J Mater Process Technol 289:116959. https://doi.org/10.1016/j.jmatprotec.2020.11695910.1016/j.jmatprotec.2020.116959 ↗
52. Yan X, Hu J, Wang L, Chai Z, Sun W, Xu W (2021) The coupled effect of thermal and mechanical stabilities of austenite on the wear resistance in a 0.2 C–5Mn-1.6Si steel down to cryogenic temperatures. Wear 486–487. https://doi.org/10.1016/j.wear.2021.20411610.1016/j.wear.2021.204116 ↗
53. Moore MA, King FS (1980) Abrasive wear of brittle solids. Wear 60:123–140. https://doi.org/https://https://doi.org/10.1016/0043-1648(80)90253-710.1016/0043-1648(80)90253-7 ↗
54. Li T, Zhang S, Xie M, Song X, Lei J (2024) Directed energy deposition of aluminium bronze/GNPs composites: Microstructural evolution for enhanced wear resistance. Tribol Int 197:109761. https://doi.org/10.1016/j.triboint.2024.10976110.1016/j.triboint.2024.109761 ↗
55. Suh NP, Saka N, Jahanmir S (1977) Implications of the delamination theory on wear minimization. Wear 44:127–134. https://doi.org/10.1016/0043-1648(77)90090-4. https://doi.org/10.1016/0043-1648(77)90090-4 ↗
56. Li Y, Qiu Y, Shi Y, Jiang G, Bai P (2024) Microstructure, wear and corrosion resistance of Ni-based composite coating by multi-layer laser cladding. Mater Today Commun 41:110369. https://doi.org/10.1016/j.mtcomm.2024.11036910.1016/j.mtcomm.2024.110369 ↗
57. Zhang Z, Qian W, Wang S, Chen Y, Wang N, Zhao Q, Li H, Gao G, Zhao Y, Zhan H (2024) Activating continuous dislocation pinning enhanced toughness of nanocomposite coating through specially oriented semicoherent heterointerface lattice distortion. Ceram Int 50:12028–12039. https://doi.org/10.1016/j.ceramint.2024.01.10510.1016/j.ceramint.2024.01.105 ↗
58. Lu HF, Xue KN, Xu X, Luo KY, Xing F, Yao JH, Lu JZ (2021) Effects of laser shock peening on microstructural evolution and wear property of laser hybrid remanufactured Ni25/Fe104 coating on H13 tool steel. J Mater Process Technol 291:117016. https://doi.org/10.1016/j.jmatprotec.2020.11701610.1016/j.jmatprotec.2020.117016 ↗
59. Wang Z, Sun L, Wang D, Song B, Liu C, Su Z, Ma C, Ren X (2024) Abrasive Wear Properties of Wear-Resistant Coating on Bucket Teeth Assessed Using. a Dry Sand Rubber Wheel Tester, Materials
60. Li Y, Shi Y, Tang S, Wu J, Zhang W, Wang J (2023) Effect of nano-WC on wear and impact resistance of Ni-based multi-layer coating by laser cladding. Int J Adv Manuf Technol 128:4253–4268. https://doi.org/10.1007/s00170-023-12035-310.1007/s00170-023-12035-3 ↗
61. Xie M, Zhou S, Jin J, Zhao S, Zhao Y (2020) Microstructure and properties of homogeneous Cu90Fe10 immiscible composites with nanotwins by laser powder deposition: Effect of spot size. J Alloys Compd 821:153231. https://doi.org/10.1016/j.jallcom.2019.15323110.1016/j.jallcom.2019.153231 ↗
62. Khruschov MM (1974) Principles of abrasive wear. Wear 28:69–88. https://doi.org/10.1016/0043-1648(74)90102-110.1016/0043-1648(74)90102-1 ↗
63. Milanese E, Brink T, Aghababaei R, Molinari J-F (2020) Role of interfacial adhesion on minimum wear particle size and roughness evolution. Phys Rev E 102:043001. https://doi.org/10.1103/PhysRevE.102.04300110.1103/PhysRevE.102.043001 ↗
64. Hu Q, Ji D, Shen M, Zhuang H, Yao H, Zhao H, Guo H, Zhang Y (2022) Three-Body Abrasive Wear Behavior of WC-10Cr3C2-12Ni Coating. for Ball Mill Liner Application, Materials
65. Chen B, Xu M (2024) Preparation and performance analysis of micro-nano composite coatings reinforced with WC particles. Mater Res Express 11:026508. https://doi.org/10.1088/2053-1591/ad288810.1088/2053-1591/ad2888 ↗