Temperature heterogeneity characteristics in dissimilar friction stir welding between aluminum alloy and magnesium alloy: insights from computational fluid dynamics simulations
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Shah LH, Othman NH, Gerlich A (2018) Review of research progress on aluminium-magnesium dissimilar friction stir welding. Sci Technol Weld Join 23:256–270. https://doi.org/10.1080/13621718.2017.137019310.1080/13621718.2017.1370193 ↗
2. Chen H, Zhu Z, Zhu Y, Sun L, Guo Y (2023) Solid-State welding of aluminum to magnesium alloys: A review. Metals 13(1410). https://doi.org/10.3390/met1308141010.3390/met13081410 ↗
3. Sun Y, Liu H, Xie R, Chen Y, Chen S (2025) Heat-balance control of friction rolling additive manufacturing based on combination of plasma preheating and instant water cooling. J Mater Sci Technol 205:168–181. https://doi.org/10.1016/j.jmst.2024.03.05410.1016/j.jmst.2024.03.054 ↗
4. Chen K, Liu X, Ni J (2019) A review of friction stir-based processes for joining dissimilar materials. Int J Adv Manuf Technol 104:1709–1731. https://doi.org/10.1007/s00170-019-03975-w10.1007/s00170-019-03975-w ↗
5. Xu Y, Ke L, Nie H, Xia C, Liu Q, Chen S (2024) Precipitation behavior of intermetallic compounds at the interface of Thick plate friction stir welded al alloy/Mg alloy joints under local strong cooling. Acta Metall Sin 60:777–788. https://doi.org/10.11900/0412.1961.2022.0060210.11900/0412.1961.2022.00602 ↗
6. Ramaswamy A, Nagasai BP, Dwivedy M, Malarvizhi S, Balasubramanian V (2024) Metallurgical characteristics of AA6061 aluminium and AZ31B magnesium dissimilar joints by fusion welding technique. Microsc Res Tech 87:1210–1221. https://doi.org/10.1002/jemt.2451010.1002/jemt.24510 ↗
7. He F, Wu C, Shi L (2023) Phase-field simulation of dynamic recrystallization in friction stir weld nugget zone of dissimilar al/mg alloys. J Mater Res Technol-JMRT 27:2670–2683. https://doi.org/10.1016/j.jmrt.2023.10.11510.1016/j.jmrt.2023.10.115 ↗
8. Zheng Y, Liu W, Su Z, Zhao Z, Ren G, Niu W, Yu Z, Zang L, Yu Z (2023) Effects of Zr interlayer on microstructure, mechanical property and corrosion behavior of al/mg dissimilar friction stir welding lap joints. Mater Charact 199:112826. https://doi.org/10.1016/j.matchar.2023.11282610.1016/j.matchar.2023.112826 ↗
9. Ahmed MMZ, Seleman MME-S, Fydrych D, Cam G (2023) Review on friction stir welding of dissimilar magnesium and aluminum alloys: scientometric analysis and strategies for achieving high-quality joints. J Magnes Alloy 11:4082–4127. https://doi.org/10.1016/j.jma.2023.09.03910.1016/j.jma.2023.09.039 ↗
10. Nagaraja S, Anand PB, Mariswamy M, Alkahtani MQ, Islam S, Khan MA, Khan WA, Bhutto JK (2024) Friction stir welding of dissimilar Al-Mg alloys for aerospace applications: prospects and future potential. Rev Adv Mater Sci 63:0033. https://doi.org/10.1515/rams-2024-003310.1515/rams-2024-0033 ↗
11. Jiang XQ, Liu YY, Yuan T, Chen SJ, Wang L, Jiang W (2022) Enhanced mechanical properties of dissimilar al and Mg alloys fabricated by pulse current assisted friction stir welding. J Manuf Process 76:123–137. https://doi.org/10.1016/j.jmapro.2022.02.00710.1016/j.jmapro.2022.02.007 ↗
12. Lokesh Kumar PJ, Sevvel P, Loganathan TG, Prakash D (2023) Investigation on the distribution and role of intermetallic aggregates in influencing the mechanical strength of the friction stir welded AZ91C Mg-AA6061 al alloy joints. Mater Res Express 10:2053–1591. https://doi.org/10.1088/2053-1591/acbbbb10.1088/2053-1591/acbbbb ↗
13. Dewangan SK, Tripathi MK, Manoj MK (2022) Material flow behavior and mechanical properties of dissimilar friction stir welded al 7075 and Mg AZ31 alloys using cd interlayer. Met Mater -Int 28:1169–1183. https://doi.org/10.1007/s12540-021-00980-110.1007/s12540-021-00980-1 ↗
14. Song Q, Wang H, Ji S, Ma Z, Jiang W, Chen M (2020) Improving joint quality of hybrid friction stir welded al/mg dissimilar alloys by RBFNN-GWO system. J Manuf Process 59:750–759. https://doi.org/10.1016/j.jmapro.2020.10.03710.1016/j.jmapro.2020.10.037 ↗
15. Verma M, Saha P (2024) A comprehensive investigation of thermal management strategies in dissimilar micro-friction stir welding (dissimilar µFSW): insights from numerical simulation and experimental observations. Eng Fail Anal 160:108252. https://doi.org/10.1016/j.engfailanal.2024.10825210.1016/j.engfailanal.2024.108252 ↗
16. Verma M, Saha P, Singh PK (2025) Optimizing heat utilization in dissimilar micro-friction stir welding of AA 2024-T3/AA 6061-T6 using dual backing plate: impact on local microstructure, mechanical, and corrosion performance. J Manuf Process 149:98–115. https://doi.org/10.1016/j.jmapro.2025.05.06110.1016/j.jmapro.2025.05.061 ↗
17. Huang TF, Zhang ZY, Liu JL, Chen SH, Xie YM, Meng XC, Huang YX, Wan L (2022) Interface formation of Medium-Thick AA6061 Al/AZ31B Mg dissimilar submerged friction stir welding joints. Materials 15:13. https://doi.org/10.3390/ma1516552010.3390/ma15165520 ↗
18. Hu L, Deng Y, Zeng J, Ou Y, Qiu Z, Zhou Y, Li Z (2024) Influence of secondary welding on microstructure and mechanical properties of friction stir welded joints of AA6061 and AZ31B alloys. Proc Inst Mech Eng Part C-J Eng Mech Eng Sci 238:4526–4535. https://doi.org/10.1177/0954406223120354310.1177/09544062231203543 ↗
19. Jiang T, Wu CS, Shi L (2022) Effects of tool pin thread on temperature field and material mixing in friction stir welding of dissimilar al/mg alloys. J Manuf Process 74:112–122. https://doi.org/10.1016/j.jmapro.2021.12.00810.1016/j.jmapro.2021.12.008 ↗
20. Lv XQ, Wu CS, Sun Z (2022) Effects of ultrasonic vibration on material flow and thermal cycles in friction stir welding of dissimilar al/mg alloys, Metall. Mater Trans A-Phys Metall Mater Sci 53:1572–1584. https://doi.org/10.1007/s11661-022-06621-510.1007/s11661-022-06621-5 ↗
21. Zheng Y, Ren G, Li L (2023) Improved mechanical and corrosion properties of friction stir welded al/mg dissimilar lap joints by Zr interlayer addition. Mater Lett 348:134710. https://doi.org/10.1016/j.matlet.2023.13471010.1016/j.matlet.2023.134710 ↗
22. Kumar M, Das A, Ballav R (2023) Influence of the Zn interlayer on the mechanical strength, corrosion and microstructural behavior of friction stir-welded 6061-T6 aluminium alloy and AZ61 magnesium alloy dissimilar joints. Mater Today Commun 35:105509. https://doi.org/10.1016/j.mtcomm.2023.10550910.1016/j.mtcomm.2023.105509 ↗
23. Wang G, Xie J, Yin L, Chen Y (2023) Interfacial microstructure evaluation of precisely controlled friction stir welding joints of al/mg dissimilar alloys with Zn interlayer, coatings. 13:1149. https://doi.org/10.3390/coatings1307114910.3390/coatings13071149 ↗
24. Salih OS, Ou H, Sun W (2023) Heat generation, plastic deformation and residual stresses in friction stir welding of aluminium alloy. Int J Mech Sci 238:1879–2162. https://doi.org/10.1016/j.ijmecsci.2022.10782710.1016/j.ijmecsci.2022.107827 ↗
25. Shi L, Chen J, Yang C, Chen G, Wu C (2023) Thermal-fluid-structure coupling analysis of void defect in friction stir welding. Int J Mech Sci 241:107969. https://doi.org/10.1016/j.ijmecsci.2022.10796910.1016/j.ijmecsci.2022.107969 ↗
26. Dialami N, Cervera M, Chiumenti M (2020) Defect formation and material flow in friction stir welding. Eur J Mech A-Solids 80:103912. https://doi.org/10.1016/j.euromechsol.2019.10391210.1016/j.euromechsol.2019.103912 ↗
27. Dialami N, Cervera M, Chiumenti M, Segatori A (2019) Prediction of joint line remnant defect in friction stir welding. Int J Mech Sci 151:61–69. https://doi.org/10.1016/j.ijmecsci.2018.11.01210.1016/j.ijmecsci.2018.11.012 ↗
28. Pankaj P, Tiwari A, Medhi T, Biswas P (2022) Multi-species transport CFD simulation and experimental verification for material flow properties in dissimilar friction stir welding. Mater Today Commun 33:22. https://doi.org/10.1016/j.mtcomm.2022.10495910.1016/j.mtcomm.2022.104959 ↗
29. Tognan A, Sandnes L, Totis G, Sortino M, Berto F, Grong O, Salvati E (2022) Evaluation and origin of residual stress in hybrid metal and extrusion bonding and comparison with friction stir welding. Int J Mech Sci 218:107089. https://doi.org/10.1016/j.ijmecsci.2022.10708910.1016/j.ijmecsci.2022.107089 ↗
30. Tognan A, Sheshi N, Vaglio E, Luzin V, Hattingh D, Salvati E (2025) Multimodal experimental and numerical evaluation of residual stress in AA6082-T6 friction stir welding pipe girths. J Mater Process Technol 335:118665. https://doi.org/10.1016/j.jmatprotec.2024.11866510.1016/j.jmatprotec.2024.118665 ↗
31. Ranjole C, Singh VP, Kuriachen B, Vineesh KP (2022) Numerical prediction and experimental investigation of temperature, residual stress and mechanical properties of dissimilar Friction-Stir welded AA5083 and AZ31 alloys. Arab J Sci Eng 47:16103–16115. https://doi.org/10.1007/s13369-022-06808-310.1007/s13369-022-06808-3 ↗
32. Biro AL, Chenelle BF, Lados DA (2012) Processing, microstructure, and residual stress effects on strength and fatigue crack growth properties in friction stir welding: a review. Metall Mater Trans B 43:1622–1637. https://doi.org/10.1007/s11663-012-9716-510.1007/s11663-012-9716-5 ↗
33. Kim C, Myung D, Kim D, Lee M-G (2023) Inhomogeneous flow stresses in FSW jointed aluminum alloy sheets inversely identified by FE-VFM. Int J Mech Sci 245. https://doi.org/10.1016/j.ijmecsci.2022.10809710.1016/j.ijmecsci.2022.108097 ↗
34. Shen J, Li Y, Zhang T, Peng D, Wang D, Xu N (2015) Preheating friction stir spot welding of mg/al alloys in various lap configurations. Sci Technol Weld Join 20:1–10. https://doi.org/10.1179/1362171814y.000000024810.1179/1362171814y.0000000248 ↗
35. Kumar M, Das A, Ballav R, Kumar N, Sharma KK (2024) Enhancing the tensile performance of al/mg alloy dissimilar friction stir welded joints by reducing brittle intermetallic compounds. Int J Mater Res 115:69–80. https://doi.org/10.1515/ijmr-2021-869010.1515/ijmr-2021-8690 ↗
36. Mehdi H, Jain S, Salah AN, Singh AP, Chawla S (2023) Effect of friction stir welding parameters on microstructure and mechanical properties of the dissimilar alloys of AZ91D and AA7075. Proc Inst Mech Eng Pt E. https://doi.org/10.1177/0954408923119544410.1177/09544089231195444 ↗
37. Chen ZW, Shi L, Su H, Wu CS (2024) Numerical and experimental investigation on intermetallic compounds formation in ultrasonic vibration enhanced friction stir welding of dissimilar al/mg alloys. J Alloy Compd 977:17. https://doi.org/10.1016/j.jallcom.2024.17342610.1016/j.jallcom.2024.173426 ↗
38. Ji S, Meng X, Liu Z, Huang R, Li Z (2017) Dissimilar friction stir welding of 6061 aluminum alloy and AZ31 magnesium alloy assisted with ultrasonic. Mater Lett 201:173–176. https://doi.org/10.1016/j.matlet.2017.05.01110.1016/j.matlet.2017.05.011 ↗
39. Zettler R, da Silva AAM, Rodrigues S, Blanco A, dos Santos JF (2006) Dissimilar al to Mg alloy friction stir welds. Adv Eng Mater 8:415–421. https://doi.org/10.1002/adem.20060003010.1002/adem.200600030 ↗
40. Firouzdor V, Kou S (2010) Al-to-Mg friction stir welding: effect of material position, travel speed, and rotation speed. Metall Mater Trans A 41:2914–2935. https://doi.org/10.1007/s11661-010-0340-110.1007/s11661-010-0340-1 ↗
41. Buffa G, Baffari D, Di Caro A, Fratini L (2015) Friction stir welding of dissimilar aluminium–magnesium joints: sheet mutual position effects. Sci Technol Weld Join 20:271–279. https://doi.org/10.1179/1362171815Y.000000001610.1179/1362171815Y.0000000016 ↗
42. Fu BL, Qin GL, Li F, Meng XM, Zhang JZ, Wu CS (2015) Friction stir welding process of dissimilar metals of 6061-T6 aluminum alloy to AZ31B magnesium alloy. J Mater Process Technol 218:38–47. https://doi.org/10.1016/j.jmatprotec.2014.11.03910.1016/j.jmatprotec.2014.11.039 ↗
43. Sharghi E, Farzadi A (2018) Simulation of strain rate, material flow, and nugget shape during dissimilar friction stir welding of AA6061 aluminum alloy and Al-Mg2Si composite. J Alloy Compd 748:953–960. https://doi.org/10.1016/j.jallcom.2018.03.14510.1016/j.jallcom.2018.03.145 ↗
44. Mofid MA, Abdollah-zadeh A, Ghaini FM (2012) The effect of water cooling during dissimilar friction stir welding of al alloy to Mg alloy. Mater Des 36:161–167. https://doi.org/10.1016/j.matdes.2011.11.00410.1016/j.matdes.2011.11.004 ↗
45. Muhammad NA, Geng PH, Wu CS, Ma NS (2023) Unravelling the ultrasonic effect on residual stress and microstructure in dissimilar ultrasonic-assisted friction stir welding of al/mg alloys. Int J Mach Tools Manuf 186:23. https://doi.org/10.1016/j.ijmachtools.2023.10400410.1016/j.ijmachtools.2023.104004 ↗
46. Zhang GL, Gao JQ, Wu CS (2023) Revealing the acoustic effects on heat transfer and material flow in ultrasonic assisted friction stir welding of dissimilar al/mg alloys. J Mater Res Technol 26:1882–1902. https://doi.org/10.1016/j.jmrt.2023.08.02810.1016/j.jmrt.2023.08.028 ↗
47. Colegrove PA, Shercliff HR (2005) 3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile. J Mater Process Technol 169:320–327. https://doi.org/10.1016/j.jmatprotec.2005.03.01510.1016/j.jmatprotec.2005.03.015 ↗
48. Su H, Chen J, Wu C (2022) Effect of tool eccentricity on the periodic material flow in friction stir welding process. Int J Mech Sci 220:107164. https://doi.org/10.1016/j.ijmecsci.2022.10716410.1016/j.ijmecsci.2022.107164 ↗
49. Verma S, Wu C, Thakur L, Muhammad NA, Li S (2024) Material flow behavior and thermal cycle during friction stir welding of AA5083/AZ91 dissimilar metals. J Mater Eng Perform. https://doi.org/10.1007/s11665-024-10374-010.1007/s11665-024-10374-0 ↗
50. Das D, Bag S, Pal S, De A (2024) A review on phenomenological model subtleties for defect assessment in friction stir welding. J Manuf Process 120:641–679. https://doi.org/10.1016/j.jmapro.2024.04.06310.1016/j.jmapro.2024.04.063 ↗
51. Al-Badour F, Merah N, Shuaib A, Bazoune A (2014) Thermo-mechanical finite element model of friction stir welding of dissimilar alloys. Int J Adv Manuf Technol 72:607–617. https://doi.org/10.1007/s00170-014-5680-310.1007/s00170-014-5680-3 ↗
52. Myung D, Noh W, Kim J-H, Kong J, Hong S-T, Lee M-G (2020) Probing the mechanism of friction stir welding with ALE based finite element simulations and its application to strength prediction of welded aluminum. Met Mater Int 27:650–666. https://doi.org/10.1007/s12540-020-00901-810.1007/s12540-020-00901-8 ↗
53. Geng P, Morimura M, Wu S, Liu Y, Ma Y, Ma N, Aoki Y, Fujii H, Ma H, Qin G (2022) Prediction of residual stresses within dissimilar al/steel friction stir lap welds using an Eulerian-based modeling approach. J Manuf Process 79:340–355. https://doi.org/10.1016/j.jmapro.2022.05.00110.1016/j.jmapro.2022.05.001 ↗
54. You J, Zhao Y, Miao S, Lin Z, Yu F, Dong C, Su Y (2023) Effects of welding physical fields on the microstructure evolution during dynamic-stationary shoulder friction stir welding. J Mater Res Technol 23:3219–3231. https://doi.org/10.1016/j.jmrt.2023.01.22810.1016/j.jmrt.2023.01.228 ↗
55. Liu XC, Sun Z (2022) Numerical simulation of vortex- friction stir welding based on internal friction between identical materials. Int J Heat Mass Transf 185:13. https://doi.org/10.1016/j.ijheatmasstransfer.2021.12241810.1016/j.ijheatmasstransfer.2021.122418 ↗
56. Esmati P, Flint T, Akyel F, Olschok S, Reisgen U, Cardiff P, Larrosa NO, Grilli N (2024) Simulating chemical mixing and molten pool shape in dissimilar welds using thermal fluid dynamics. Int J Heat Mass Transf 226:18. https://doi.org/10.1016/j.ijheatmasstransfer.2024.12544910.1016/j.ijheatmasstransfer.2024.125449 ↗
57. Nandan R, Roy GG, Lienert TJ, Debroy T (2007) Three-dimensional heat and material flow during friction stir welding of mild steel. Acta Mater 55:883–895. https://doi.org/10.1016/j.actamat.2006.09.00910.1016/j.actamat.2006.09.009 ↗
58. Schmidt H, Hattel J, Wert J (2004) An analytical model for the heat generation in friction stir welding. Model Simul Mater Sci Eng 12:143–157. https://doi.org/10.1088/0965-0393/12/1/01310.1088/0965-0393/12/1/013 ↗
59. Colegrove PA, Shercliff HR, Zettler R (2007) Model for predicting heat generation and temperature in friction stir welding from the material properties. Sci Technol Weld Join 12:284–297. https://doi.org/10.1179/174329307x19753910.1179/174329307x197539 ↗
60. Qian JW, Li JL, Xiong JT, Zhang FS, Li WY, Lin X (2012) Periodic variation of torque and its relations to interfacial sticking and slipping during friction stir welding. Sci Technol Weld Join 17:338–341. https://doi.org/10.1179/1362171812y.000000000110.1179/1362171812y.0000000001 ↗
61. Atharifar H, Lin D, Kovacevic R (2009) Numerical and experimental investigations on the loads carried by the tool during friction stir welding. J Mater Eng Perform 18:339–350. https://doi.org/10.1007/s11665-008-9298-110.1007/s11665-008-9298-1 ↗
62. Schmidt H, Hattel J (2005) A local model for the thermomechanical conditions in friction stir welding. Model Simul Mater Sci Eng 13:77–93. https://doi.org/10.1088/0965-0393/13/1/00610.1088/0965-0393/13/1/006 ↗
63. Liechty BC, Webb BW (2008) Modeling the frictional boundary condition in friction stir welding. Int J Mach Tools Manuf 48:1474–1485. https://doi.org/10.1016/j.ijmachtools.2008.04.00510.1016/j.ijmachtools.2008.04.005 ↗
64. Zhang Z (2008) Comparison of two contact models in the simulation of friction stir welding process. J Mater Sci 43:5867–5877. https://doi.org/10.1007/s10853-008-2865-x10.1007/s10853-008-2865-x ↗
65. Colegrove PA, Shercliff HR (2006) CFD modelling of friction stir welding of Thick plate 7449 aluminium alloy. Sci Technol Weld Join 11:429–441. https://doi.org/10.1179/174329306x10770010.1179/174329306x107700 ↗
66. Su H, Wu CS, Pittner A, Rethmeier M (2014) Thermal energy generation and distribution in friction stir welding of aluminum alloys. Energy 77:720–731. https://doi.org/10.1016/j.energy.2014.09.04510.1016/j.energy.2014.09.045 ↗
67. Kishore VR, Arun J, Padmanabhan R, Balasubramanian V (2015) Parametric studies of dissimilar friction stir welding using computational fluid dynamics simulation. Int J Adv Manuf Technol 80:91–98. https://doi.org/10.1007/s00170-015-6995-410.1007/s00170-015-6995-4 ↗
68. Padmanaban R, Kishore VR, Balusamy V (2014) Numerical simulation of temperature distribution and material flow during friction stir welding of dissimilar aluminum alloys. Procedia Eng 97:854–863. https://doi.org/10.1016/j.proeng.2014.12.36010.1016/j.proeng.2014.12.360 ↗
69. Yang CL, Wu CS, Lv XQ (2018) Numerical analysis of mass transfer and material mixing in friction stir welding of aluminum/magnesium alloys. J Manuf Process 32:380–394. https://doi.org/10.1016/j.jmapro.2018.03.00910.1016/j.jmapro.2018.03.009 ↗
70. Yang CL, Chen GQ, Qiao JN, Wu CS, Zhou MR, Zhang G, Shi QY (2024) Material flow during dissimilar friction stir welding of al/mg alloys. Int J Mech Sci 272:17. https://doi.org/10.1016/j.ijmecsci.2024.10917310.1016/j.ijmecsci.2024.109173 ↗
71. Yang C, Dai Q, Shi Q, Wu C, Zhang H, Chen G (2022) Flow-coupled thermo-mechanical analysis of frictional behaviors at the tool-workpiece interface during friction stir welding. J Manuf Process 79:394–404. https://doi.org/10.1016/j.jmapro.2022.05.00310.1016/j.jmapro.2022.05.003 ↗
72. Bhattacharjee R, Biswas P (2021) Review on thermo-mechanical and material flow analysis of dissimilar friction stir welding. Weld Int 35:295–332. https://doi.org/10.1080/09507116.2021.199225610.1080/09507116.2021.1992256 ↗
73. Yang C, Wu C, Shi L (2020) Modeling the dissimilar material flow and mixing in friction stir welding of aluminum to magnesium alloys. J Alloy Compd 843:156021. https://doi.org/10.1016/j.jallcom.2020.15602110.1016/j.jallcom.2020.156021 ↗
74. Chen GQ, Shi QY, Fujiya Y, Horie T (2014) Simulation of metal flow during friction stir welding based on the model of interactive force between tool and material. J Mater Eng Perform 23:1321–1328. https://doi.org/10.1007/s11665-014-0886-y10.1007/s11665-014-0886-y ↗
75. Zhai M, Wu CS, Shi L (2022) Numerical simulation of friction stir lap welding of Al-to-Mg alloys under different lap configurations and pin lengths. J Mater Res Technol 20:2889–2904. https://doi.org/10.1016/j.jmrt.2022.08.04710.1016/j.jmrt.2022.08.047 ↗
76. Sellars CM WJM (1966) On the mechanism of hot deformation. Acta Metall 14:1136–113810.1016/0001-6160(66)90207-0 ↗
77. Chen G, Ma Q, Zhang S, Wu J, Zhang G, Shi Q (2018) Computational fluid dynamics simulation of friction stir welding: A comparative study on different frictional boundary conditions. J Mater Sci Technol 34:128–134. https://doi.org/10.1016/j.jmst.2017.10.01510.1016/j.jmst.2017.10.015 ↗
78. Assidi M, Fourment L, Guerdoux S, Nelson T (2010) Friction model for friction stir welding process simulation: calibrations from welding experiments. Int J Mach Tools Manuf 50:143–155. https://doi.org/10.1016/j.ijmachtools.2009.11.00810.1016/j.ijmachtools.2009.11.008 ↗
79. Mostaghel N, Davis T (1997) Representations of coulomb friction for dynamic analysis. Earthq Eng Struct Dynamics 26:541–548. https://doi.org/10.1002/(sici)1096-9845(199705)26:5%3C541::Aid-eqe660%3E3.0.Co;2-w10.1002/(sici)1096-9845(199705)26:5%3C541::Aid-eqe660%3E3.0.Co;2-w ↗
80. Chen GQ, Shi QY, Li YJ, Sun YJ, Dai QL, Jia JY, Zhu YC, Wu JJ (2013) Computational fluid dynamics studies on heat generation during friction stir welding of aluminum alloy. Comput Mater Sci 79:540–546. https://doi.org/10.1016/j.commatsci.2013.07.00410.1016/j.commatsci.2013.07.004 ↗
81. Zhang G, Gao J, Wu C (2024) Dislocation density based constitutive model for ultrasonic vibration assisted friction stir welding of dissimilar al/mg alloys. J Manuf Process 131:336–355. https://doi.org/10.1016/j.jmapro.2024.09.02810.1016/j.jmapro.2024.09.028 ↗
82. Xu Y, Ke L, Ouyang S, Mao Y, Niu P (2021) Precipitation behavior of intermetallic compounds and their effect on mechanical properties of Thick plate friction stir welded al/mg joint. J Manuf Process 64:1059–1069. https://doi.org/10.1016/j.jmapro.2020.12.06810.1016/j.jmapro.2020.12.068 ↗
83. Zhao W, Zhu Y, Liu Z, Fu A, He H (2024) Mechanism of ultrasonic effects on thermal-stress field in cu/ Al-FSW process. Int J Mech Sci 270:109101. https://doi.org/10.1016/j.ijmecsci.2024.10910110.1016/j.ijmecsci.2024.109101 ↗
84. Nandan R, Roy GG, Debroy T (2006) Numerical simulation of three-dimensional heat transfer and plastic flow during friction stir welding. Metall Mater Trans A-Phys Metall Mater Sci 37A:1247–1259. https://doi.org/10.1007/s11661-006-1076-910.1007/s11661-006-1076-9 ↗