Mini symposium on cutting and machining: 25 years of ESAFORM activity
Source abstract
Abstract
Abstract This paper reports on the state of the art in the experimental and numerical investigations of cutting and machining processes. The contributions on the above-mentioned processes and published on the Proceedings of the European Scientific Association for material FORMing (ESAFORM) Conferences are highlighted. In particular, this literature review is an update of a previous one conducted in the 2007, after ten years of the ESAFORM activities, and it confirms the crucial role played by the minisymposium on Machining and Cutting in this field. In fact, the research has been quite active even in these last fifteen years, as demonstrated by the number of contributions and their relevant scientific contents. As overall, this review shows as the minisymposium on Machining and Cutting, that has been organized since 2001 with no interruptions, has contributed to the scientific progress on the study of the material removal processes.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Agirreurreta AA, Pelegay JA, Arrazola PJ, Orskov KB, Chinesta F, Cueto E, Abisset-Chavanne E (2016) High productivity machining of holes in Inconel 718 with SiAlON tools, AIP Conference Proceedings 1769, 08000610.1063/1.4963481 ↗
2. Amaro P, Ferreira P, Simões F (2018) Tool wear analysis during duplex stainless steel trochoidal milling. AIP Conference Proceedings, 1960, 07000110.1063/1.5034897 ↗
3. Amaro P, Ferreira P, Simões F (2020) Comparative analysis of different cutting milling strategies applied in duplex stainless steel. Procedia Manuf 47:517–52410.1016/j.promfg.2020.04.132 ↗
4. Ambrogio G, Di Renzo S, Gagliardi F, Umbrello D (2012) White and Dark Layer Analysis Using Response Surface Methodology.Key Engineering Materials,504–506, pp. 1335–134010.4028/www.scientific.net/KEM.504-506.1335 ↗
5. Angiuli R, Giannuzzi M, Papadia G (2019) Experimental thermographic investigation for dry finish turning of SAF 2507 steel. AIP Conference Proceedings, 2113, art. no. 080004, DOI: https://doi.org/10.1063/1.511261210.1063/1.5112612 ↗
6. Andreas K, Engel U, Merklein M (2012) Influence of Grinding on the Surface Properties of Cemented Carbides.In Key Engineering Materials,504–506, pp. 1353–135810.4028/www.scientific.net/KEM.504-506.1353 ↗
7. Arrazola PJ, Barbero O, Urresti I (2010) Influence of material parameters on serrated chip prediction in finite element modeling of chip formation process. International Journal of Material Forming, 3 (SUPPL. 1), pp. 519–52210.1007/s12289-010-0821-1 ↗
8. Arrazola PJ, Özel T, Umbrello D, Davies M, Jawahir IS (2013a) Recent advances in modelling of metal machining processes. CIRP Annals - Manufacturing Technology 62(2):695–71810.1016/j.cirp.2013.05.006 ↗
9. Arrazola PJ, Matsumura T, Armentia I, Kortabarria A (2013b) Thermo mechanical loads In Ti-6Al-4V machining.Key Engineering Materials,554–557, pp. 2047–205310.4028/www.scientific.net/KEM.554-557.2047 ↗
10. Arrieta I, Courbon C, Cabanettes F, Arrazola PJ, Rech J (2017) Influence of the ferritic-pearlitic steel microstructure on surface roughness in broaching of automotive steels, AIP Conference Proceedings 1896, 09001110.1063/1.5008118 ↗
11. Asad M, Girardin F, Mabrouki T, Rigal J-F (2008) Dry cutting study of an aluminium alloy (A2024-T351): A numerical and experimental approach. IntJ Mater Form 1:499–50210.1007/s12289-008-0150-9 ↗
12. Attanasio A, Ceretti E, Giardini C, Filice L, Umbrello D (2008) Criterion to evaluate diffusive wear in 3D simulations when turning AISI 1045 steel. Int J Mater Form 1:495–49810.1007/s12289-008-0130-0 ↗
13. Attanasio A, Umbrello D (2009) Abrasive and diffusive tool wear FEM simulation. Int J Mater Form 2:543–54610.1007/s12289-009-0475-z ↗
14. Attanasio A, Ceretti E, Giardini C (2011) 3D FEM simulation of flank wear in turning, AIP Conference Proceedings, 1353, 56110.1063/1.3589574 ↗
15. Ayed Y, Germain G, Ammar A, Furet B (2013) Experimental study of tool wear mechanisms in conventional and high pressure coolant assisted machining of titanium alloy Ti17.Key Engineering Materials,554–557, 1961–196610.4028/www.scientific.net/KEM.554-557.1961 ↗
16. Batista M, Calamaz M, Girot F, Salguero J, Marcos M (2012) Using image analysis techniques for single evaluation of the chip shrinkage factor in orthogonal cutting process.Key Engineering Materials,504–506, pp. 1329–133410.4028/www.scientific.net/KEM.504-506.1329 ↗
17. Bellin M, Sartori S, Ghiotti A, aBruschi S (2017) New tool holder design for cryogenic machining of Ti6Al4V, AIP Conference Proceedings 1896, 09000110.1063/1.5008108 ↗
18. Benhassine M, Rivière-Lorphèvre E, Arrazola P-J, Gobin P, Dumas D, Madhavan V, Aizpuru O, Ducobu F (2018) 2D simulations of orthogonal cutting of CFRP: Effect of tool angles on parameters of cut and chip morphology. AIP Conference Proceedings, 1960, art. no. 07000510.1063/1.5034901 ↗
19. Benhassine M, Rivière-Lorphèvre E, Arrazola P-J, Gobin P, Granjon A, Aizpuru O, Ducobu F (2019) Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanism. AIP Conference Proceedings, 2113, art. no. 08000310.1063/1.5112611 ↗
20. Ben Boubaker H, Ayed Y, Mareau C, Germain G (2018) “On the formation of adiabatic shear bands in titanium alloy Ti17 under severe loading conditions”, AIP Conference Proceedings 1960, 07000410.1063/1.5034900 ↗
21. Bertolini R, Ghiotti A, Bruschi S (2021) Cryogenic machining to enhance surface finish of a biomedical grade ultra-high-molecular weight polyethylene. 24th International Conference on Material Forming, Liège, Belgique10.25518/esaform21.3749 ↗
22. Biermann D, Höhne F, Sieben B et al (2010) Finite element modeling and three-dimensional simulation of the turning process incorporating the material hardness. Int J Mater Form 3, 459–462 (2010)10.1007/s12289-010-0806-0 ↗
23. Bonnet C, Pottier T, Landon Y, Bouzid A (2021) Validation of a multi-scale Ti-6Al-4V drilling model by means of thermomechanical field measurements, Liegi, Belgium10.25518/esaform21.1878 ↗
24. Bordin A, Bruschi S, Ghiotti1 A, Bucciotti F, Facchini L (2014) Comparison between wrought and EBM Ti6Al4V machinability characteristics.Key Engineering Materials,611–612, 1186–119310.4028/www.scientific.net/KEM.611-612.1186 ↗
25. Braham-Bouchnak T, Germain G, Robert P, Lebrun JL (2010) High pressure water jet assisted machining of duplex steel: machinability and tool life. Int J Mater Form 3:507–51010.1007/s12289-010-0818-9 ↗
26. Boubakri C, Wolff NM, Moufki A, Dubar L, Watremez M, Hubert C (2019) Micromachining simulation using a crystal plasticity model: ALE and CEL approaches, AIP Conference Proceedings 2113, 08001710.1063/1.5112625 ↗
27. Bordin A, Imbrogno S, Bruschi S, Ghiotti A, Umbrello D (2015) Numerical Modelling of Orthogonal Cutting of Electron Beam Melted Ti6Al4V.Key Engineering Materials,651–653, 1255–126010.4028/www.scientific.net/KEM.651-653.1255 ↗
28. Bruschi S, Ghiotti A, Bordin A (2013) Effect of the Process Parameters on the Machinability Characteristics of a CoCrMo Alloy.In Key Engineering Materials,554–557, pp. 1976–198310.4028/www.scientific.net/KEM.554-557.1976 ↗
29. Burns TJ, Mates S, Rhorer RL et al (2010) Modeling of the temperature field in the chip and in the tool in high-speed machining of a carbon steel: effect of pearlite to austenite phase10.1007/s12289-010-0814-0 ↗
30. Cappellini C, Attanasio A, Rotella G, Umbrello D (2010) Formation of white and dark layers in hard cutting: influence of tool wear. IntJ Mater Form 3:455–45810.1007/s12289-010-0805-1 ↗
31. Careri F, Imbrogno S, Attallah MM, Essa K, Umbrello D (2020) Finite element modeling of machining nickel superalloy produced by direct energy deposition process. Procedia Manuf 47:525–52910.1016/j.promfg.2020.04.120 ↗
32. Caruso S, Outeiro JC, Umbrello D, M’Saoubi R (2010) Modeling and experimental validation of the surface residual stresses induced by hard machining of AISI H13 tool steel. IntJ Mater Form 3:515–51810.1007/s12289-010-0820-2 ↗
33. Caruso S, Outeiro JC, Umbrello D, Batista AC (2014) Residual Stresses in Machining of AISI 52100 Steel under Dry and Cryogenic Conditions: A Brief Summary.Key Engineering Materials,611–612, pp. 1236–124210.4028/www.scientific.net/KEM.611-612.1236 ↗
34. Caruso S, Rinaldi S, Franchi R, Del Prete A, Umbrello D (2017) Experimental analysis of influence of cutting conditions on machinability of waspaloy. AIP Conference Proceedings, 1896, art. no. 09000810.1063/1.5008115 ↗
35. Chaabani S, Rodriguez I, Cuesta M, Ayed Y, Arrazola PJ, Germain G (2019) Tool wear and cutting forces when machining inconel 718 under cryogenic conditions: Liquid nitrogen and carbon dioxide. AIP Conference Proceedings, 2113, art. no. 08000210.1063/1.5112610 ↗
36. Chaabani S, Arrazola PJ, Ayed Y, Madariaga A, Tidu A, Germain G (2020) Surface integrity when machining Inconel 718 using conventional lubrication and carbon dioxide coolant. Procedia Manuf 47:530–53410.1016/j.promfg.2020.04.150 ↗
37. Chinesta F, Filice L, Micari F et al (2008) Assessment of material models through simple machining tests. Int J Mater Form 1:507–51010.1007/s12289-008-0171-4 ↗
38. Chodor J, Kukielka L, Kaldunski P, Bohdal L, Patyk R, Kulakowska A (2018) Evaluation of the correctness of the feed selection based on the analysis of chip’s shape. AIP Conference Proceedings, 1960, art. no. 07000710.1063/1.5034903 ↗
39. Courbon C, Mabrouki T, Rech J et al (2010) On the identification conditions of a constitutive model in machining of AISI 1045 steel. Int J Mater Form 3:439–44210.1007/s12289-010-0801-5 ↗
40. Courbon C, Mabrouki T, Rech J, Mazuyer D, Perrard F, D’Eramo E (2013) Metallurgical Aspects of Material Behaviour in Cutting of AISI 1045.Key Engineering Materials,554–557, pp. 2085–209210.4028/www.scientific.net/KEM.554-557.2085 ↗
41. David T, Methon G, M’Saoubi R, Girinon M, Rech J, Courbon C (2021) Characterization of wear modes in orthogonal milling of 15-5PH stainless steel. ESAFORM 202110.25518/esaform21.908 ↗
42. Del Prete A, Vitis AA, Spagnolo A (2010a) Experimental development of RSM techniques for surface quality prediction in metal cutting applications. IntJ Mater Form 3:471–47410.1007/s12289-010-0809-x ↗
43. Del Prete A, De Vitis AA, Anglani A (2010b) Roughness improvement in machining operations through coupled metamodel and genetic algorithms technique. IntJ Mater Form 3:467–47010.1007/s12289-010-0808-y ↗
44. Del Prete A, De Vitis AA, Filice L, Caruso S, Umbrello D (2012) Tool engage investigation in nickel superalloy turning operations.Key Engineering Materials,504–506, 1305–131010.4028/www.scientific.net/KEM.504-506.1305 ↗
45. Desmaison O, Mocellin K, Jardin N (2011) Modelling of Residual Stresses Induced By High Speed Milling Process, AIP Conference Proceedings 1353, 597–60210.1063/1.3589580 ↗
46. Denkena B, Ammermann C, Niederwestberg D (2012) Development of a calorimeter to determine the chip heat in drilling of C45EN. Key Eng Mater 504–506. DOI: https://doi.org/10.4028/www.scientific.net/KEM.504-506.134110.4028/www.scientific.net/KEM.504-506.1341 ↗
47. Dornfeld D, Min S, Takeuchi Y (2006) Recent Advances in Mechanical Micromachining. Cirp Annals – Manufacturing Technology 55(2):745–76810.1016/j.cirp.2006.10.006 ↗
48. Drobnič M, Pušavec F, Čekada M (2021) Liquid LCO2 Assisted Machining of Martensitic Stainless Steel with TiAlSiN PVD Coated Tools. 24th International Conference on Material Forming, Liège, Belgique10.25518/esaform21.4246 ↗
49. Ducobu F, Arrazola P-J, Rivière-Lorphèvre E, Filippi E (2015) Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling.Key Engineering Materials,651–653, pp. 1197–120310.4028/www.scientific.net/KEM.651-653.1197 ↗
50. Ducobu F, Demarbaix A, Pantalé O (2021) Finite element modelling of the Taylor impact test in 3D with the Coupled Eulerian-Lagrangian method. 24th International Conference on Material Forming, Liège, Belgique10.25518/esaform21.316 ↗
51. Equeter L, Ducobu F, Rivière-Lorphèvre E, Abouridouane M, Klocke F, Dehombreux P (2018) Estimation of the influence of tool wear on force signals: a finite element approach in AISI 1045 orthogonal cutting. AIP Conference Proceedings 1960, 07001210.1063/1.5034908 ↗
52. Fabre D, Bonnet C, Rech J, Mabrouki T (2016) Iterative Lagrangian model of broaching to study cutting forces, temperatures and chip formation. AIP Conference Proceedings, 1769, art. no. 08000310.1063/1.4963478 ↗
53. Fergani O, Jiang X, Welo T (2016) Analysis of residual stress-induced distortions of thin sheet structures in multi-step milling, AIP Conference Proceedings 1769, 08001410.1063/1.4963489 ↗
54. Ferreira P, Simões F, Relvas C (2014) Experimental analysis of milling operations in Ti-6Al-4V and Co-28Cr-6Mo alloys for medical devices.Key Engineering Materials,611–612, pp. 1282–129310.4028/www.scientific.net/KEM.611-612.1282 ↗
55. Filice L, Micari F, Rizzuti S, Umbrello D (2007) A critical analysis on the friction modeling in orthogonal cutting of steel. AIP Conference Proceedings, 907, pp. 745–75010.1063/1.2729602 ↗
56. Franco P, Estrems M, Faura F (2007) Numerical modelling of tool wear in turning with cemented carbide cutting tools. AIP Conference Proceedings 907, 71510.1063/1.2729597 ↗
57. Fukumori S, Itoigawa F, Maegawa S, Nakamura T, Shamoto E (2019) Suppression mechanism of diamond tool wear in ultrasonic vibration cutting. AIP Conference Proceedings. 2113. 08002010.1063/1.5112628 ↗
58. Ganesan SM, Khan YA, Valberg H et al (2008) Cutting applied as test method for acquisition of flow stress data at high strains and strain rates. Int J Mater Form 1:519–52210.1007/s12289-008-0193-y ↗
59. Germain G, Lebrun JL, Braham-Bouchnak T, Bellett D, Auger S (2008) Laser-assisted machining of Inconel 718 with carbide and ceramic DOI: 10.1007/s12289-008-0213-y. All Open Access, Green, OPEN ACCESS
60. Giovenco A, Courbon C, Cabanettes F, Rech J, Masciantonio U, Karaouni H, D’Eramo E, Van Robaeys A, Jourden E (2019) Importance of the contact interface definition in the numerical simulation of tool wear in metal cutting. AIP Conference Proceedings, 2113, 08000710.1063/1.5112615 ↗
61. Girardin F, Remond D, Rigal J-F (2010) A new method for detecting tool wear and breakage in milling. Int J Mater Form 3:463–46610.1007/s12289-010-0807-z ↗
62. Gravier J, Vignal V, Bissey-Breton S, Farré J (2008) Impact of cutting conditions on mechanical, microstructural and electrochemical state in super finish turning of copper. IntJ Mater Form 1:527–53010.1007/s12289-008-0214-x ↗
63. Gutowski T, Murphy C, Allen D, Bauer D, Bras B, Piwonka T, Sheng P, Sutherland J, Thurston D, Wolff E (2005) Environmentally Benign Manufacturing: Observations from Japan, Europe and the United States. J Clean Prod 13(1):1–1710.1016/j.jclepro.2003.10.004 ↗
64. Habak M, Lebrun JL, Morel A (2007) A study of the influence of the metallurgical state on shear band and white layer generation in 100Cr6 steel: application to machining, AIP Conference Proceedings 907, 691–69610.1063/1.2729593 ↗
65. Haddag B, Nouari M, Moufki A (2016) Some cases of machining large-scale parts: Characterization and modelling of heavy turning, deep drilling and broaching. AIP Conference Proceedings, 1769, art. no. 08000410.1063/1.4963479 ↗
66. Harzallah M, Pottier T, Senatore J, Mousseigne M, Germain G, Landon Y (2016) A new behavior model for better understanding of titanium alloys Ti-6Al-4V chip formation in orthogonal cutting, AIP Conference Proceedings 1769, 08001510.1063/1.4963490 ↗
67. He Y, Li L-N, Li C-Y, Chen L, Yue X (2013) Experimental investigation on the cutting heat distribution with different coating structures inserts.Key Engineering Materials,554–557, pp. 1953–196010.4028/www.scientific.net/KEM.554-557.1953 ↗
68. Imbrogno S, Rotella G, Umbrello D (2014) On the Flow Stress Model Selection for Finite Element Simulations of Machining of Ti6Al4V. Key Engineering Materials, Vols. 611–612, pp. 1274–128110.4028/www.scientific.net/KEM.611-612.1274 ↗
69. Imbrogno S, Rinaldi S, Seara B, Arrazola PJ, Rotella G, Umbrello D (2016a) 2D finite element model and microstructural changes during cutting of Ti6Al4V in dry condition, AIP Conference Proceedings 1769, 08001010.1063/1.4963485 ↗
70. Imbrogno S, Bordin A, Bruschi S, Umbrello D (2016b) Experimental analysis on semi-finishing machining of Ti6Al4V additively manufactured by direct melting laser sintering, AIP Conference Proceedings 1769, 080007 https://doi.org/10.1063/1.496348210.1063/1.4963482 ↗
71. Imbrogno S, Segebade E, Fellmeth A, Gerstenmeyer M, Zanger F, Schulze V, Umbrello D (2017) Microstructural and hardness changes in aluminum alloy Al-7075: Correlating machining and equal channel angular pressing, AIP Conference Proceedings 1896, 09000510.1063/1.5008112 ↗
72. Imbrogno S, Rinaldi S, Suarez AG, Arrazola PJ, Umbrello D (2018a) High speed machinability of the aerospace alloy AA7075 T6 under different cooling conditions. AIP Conference Proceedings, 1960, art. no. 07001310.1063/1.5034909 ↗
73. Imbrogno S, Rinaldi S, Raso A, Bordin A, Bruschi S, Umbrello D (2018b) 3D FE simulation of semi-finishing machining of Ti6Al4V additively manufactured by direct metal laser sintering, AIP Conference Proceedings 1960, 07001410.1063/1.5034910 ↗
74. Jafarian F, Ciaran MI, Arrazola PJ, Filice L, Umbrello D, Amirabadi H (2014) Effects of the Flow Stress in Finite Element Simulation of Machining Inconel 718 Alloy. In Key Engineering Materials (Vols. 611–612, pp. 1210–121610.4028/www.scientific.net/KEM.611-612.1210 ↗
75. Jayal AD, Badurdeen F, Jawahir D Jr, I.S (2010) Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels. CIRP J Manufact Sci Technol 2(3):144–15210.1016/j.cirpj.2010.03.006 ↗
76. Jawahir IS, Balaji AK (2000) Predictive Modeling and Optimization of Turning Operations with Complex Grooved Cutting Tools for Curled Chip Formation and Chip Breaking. Mach Sci Technol 4(3):399–44310.1080/10940340008945717 ↗
77. Jegatheesan V, Liow JL, Shu L, Kim SH, Visvanathan C (2009) The Need for Global Coordination in Sustainable Development. J Clean Prod 17(7):637–64310.1016/j.jclepro.2008.11.016 ↗
78. Jovane F, Yoshikawa H, Alting L, Boër CR, Westkamper E, Williams D, Tseng M, Seliger G, Paci AM (2008) The Incoming Global Technological and Industrial Revolution Towards Competitive Sustainable Manufacturing. CIRP Ann Manuf Technol 57(2):641–65910.1016/j.cirp.2008.09.010 ↗
79. Kalhori V, Wedberg D, Lindgren L (2010) Simulation of mechanical cutting using a physical based material model. IntJ Mater Form 3:511–51410.1007/s12289-010-0819-8 ↗
80. Klocke F, Lung D, Krämer A, Cayli T, Sangermann H (2013) Potential of modern lubricoolant strategies on cutting performance.Key Engineering Materials,554–557, pp. 2062–207110.4028/www.scientific.net/KEM.554-557.2062 ↗
81. Klocke F, Döbbeler B, Lung S, Seelbach T, Jawahir IS (2018a) Analysis of surface integrity in machining of AISI 304 stainless steel under various cooling and cutting conditions, AIP Conference Proceedings 1960, 07001510.1063/1.5034911 ↗
82. Klocke F, Döbbeler B, Lakner T (2018b) Impact of high-pressure coolant supply on chip formation in milling Impact of High-Pressure Coolant Supply on Chip Formation in Milling.Procedia CIRP.7710.1063/1.5008110 ↗
83. Komatsu T, Matsumura T, Yoshino T, Torizuka S (2011) Micro cutting process of ultra fine grain steels. AIP Conference Proceedings, 1353, pp. 585–59010.1063/1.3589578 ↗
84. Kugalur-Palanisamy N, Riviere-Lorphèvre E, Arrazola P-J, Ducobu F (2019) Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process. AIP Conference Proceedings, 2113, art. no. 08000910.1063/1.5112617 ↗
85. Kugalur-Palanisamy N, Rivière-Lorphèvre E, Ducobu F, Arrazola P-J (2020) Influence of the choice of the parameters on constitutive models and their effects on the results of Ti6Al4V orthogonal cutting simulation. Procedia Manuf 47:458–46510.1016/j.promfg.2020.04.335 ↗
86. Kugalur-Palanisamy N, Rivière-Lorphèvre E, Arrazola P, Ducobu F (2021) Influences of Cutting Speed and Material Constitutive Models on Chip Formation and their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulation. 24th International Conference on Material Forming, Liège10.25518/esaform21.2424 ↗
87. Kulakowska A, Kukielka L, Kaldunski P, Bohdal L, Patyk R, Chodor J, Kukielka K (2018) Burnishing rolling process of the surface prepared in the turning process, AIP Conference Proceedings 1960, 07001610.1063/1.5034912 ↗
88. Le Mercier K, Watremez M, Fouilland L, Guérin JD, Dubar L (2014) Thermo-Mechanical Behaviour of Spheroidal Graphite Iron.Engineering Materials, Vols.611–612, pp. 1250–125710.4028/www.scientific.net/KEM.611-612.1250 ↗
89. Lorong P, Micari F, Touratier M (2007) Modelling of Cutting and Machining: 10 years of ESAFORM activity, Advances in Material Forming. Springer, pp 225–23610.1007/978-2-287-72143-4_13 ↗
90. Lu T, Gupta A, Jayal AD, Badurdeen F, Feng SC, Dillon OW Jr, Jawahir IS (2011) A Framework of Product and Process Metrics for Sustainable Manufacturing, Advances in Sustainable Manufacturing, pp. 331–33610.1007/978-3-642-20183-7_48 ↗
91. Makarov VF, Tokarev D, Tyktamishev VR (2008) High speed broaching of hard machining materials. IntJ Mater Form 1:547–55010.1007/s12289-008-0276-9 ↗
92. Manco GL, Caruso S, Rotella G (2010) FE modeling of microstructural changes in hard turning of AISI 52100 steel. IntJ Mater Form 3:447–45010.1007/s12289-010-0803-3 ↗
93. Mäntyjärvi K, Väisänen A, Karjalainen JA (2009) Cutting method influence on the fatigue resistance of ultra-high-strength steel. IntJ Mater Form 2:547–55010.1007/s12289-009-0583-9 ↗
94. Makhfi S, Malek Habak M, Velasco R, Haddouche K, Vantomme P (2011) Prediction of Cutting Forces Using ANNs Approach in Hard Turning of AISI 52100 steel, AIP Conference Proceedings, 1353, 669–67410.1063/1.3589592 ↗
95. Marouvo J, Ferreira P, Simões F (2021) Cutting Performance of Austenitic and Duplex Stainless Steels with Drills of Three Cutting Edges. Paper presented at ESAFORM 2021. 24th International Conference on Material Forming, Liège, Belgique. doi: https://doi.org/10.25518/esaform21.428410.25518/esaform21.4284 ↗
96. Matsumura T, Shirakashi T, Usui E (2008) Identification of wear characteristics in tool wear model of cutting process. International Journal of Material Forming, 1 (SUPPL. 1), pp. 555–55810.1007/s12289-008-0297-4 ↗
97. Matsumura T, Hori I, Shirakashi T (2010) Analysis of cutting temperature in drilling process. International Journal of Material Forming, 3 (SUPPL. 1), pp. 499–50210.1007/s12289-010-0816-y ↗
98. Maurel A, Michel G, Thibaud S, Fontaine M, Gelin JC (2007) Inverse Method for Identification of Material Parameters Directly from Milling Experiments, AIP Conference Proceedings 907, 739–74410.1063/1.2729601 ↗
99. Mehrban M, Naderi D, Panahizadeh V, Naeini HM (2008) Modelling of tool life in turning process using expermental method. Int J Mater Form 1:559–56210.1007/s12289-008-0298-3 ↗
100. Meena A, El Mansori M (2016) Cutting performance and wear mechanisms of PVD coated carbide tools during dry drilling of newly produced ADI. 1769:080011. https://doi.org/10.1063/1.496348610.1063/1.4963486 ↗