Enhancement of upsetting technology for minimizing internal defects in heavy ingot casting: simulation, optimization, and experimental validation
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Hardin RA, Beckermann C (2013) Effect of porosity on deformation, damage, and fracture of cast steel. Metall Mater Trans A 44:5316–533210.1007/s11661-013-1669-z ↗
2. Hardin RA, Beckermann C (2007) Effect of porosity on the stiffness of cast steel. Metall Mater Trans A 38(12):2992–300610.1007/s11661-007-9390-4 ↗
3. Hardin RA, Beckermann C (2009) Prediction of the fatigue life of cast steel containing shrinkage porosity. Metall Mater Trans A 40:581–59710.1007/s11661-008-9755-3 ↗
4. Saby M, Bouchard P-O, Bernacki M (2015) Void closure criteria for hot metal forming: a review. J Manuf Process 19:239–25010.1016/j.jmapro.2014.05.006 ↗
5. Park CY, Yang D-Y (1997) Modelling of void crushing for large-ingot hot forging. J Mater Process Technol 67:1–310.1016/S0924-0136(96)02843-9 ↗
6. Ravi B, Joshi D, Singh K (2008) Part, tooling and method optimisation driven by castability analysis and cost model, in Proceedings of 68th World Foundry Congress
7. Manjabacas MC, Miguel V (2023) A methodology to define the Niyama Criterion Reinforced with the solid fraction analysis: application to Sand Casting of Steel bars. Met (Basel) 13(10):177710.3390/met13101777 ↗
8. Wang M et al (2016) Analysis of laminated crack defect in the upsetting process of heavy disk-shaped forgings. Eng Fail Anal 59:197–21010.1016/j.engfailanal.2015.10.005 ↗
9. Markov OE, Gerasimenko OV, Kukhar VV, Abdulov OR, Ragulina NV (2019) Computational and experimental modeling of new forging ingots with a directional solidification: the relative heights of 1.1. J Brazilian Soc Mech Sci Eng 41:1–1310.1007/s40430-019-1810-z ↗
10. Markov OE, Khvashchynskyi AS, Musorin AV, Markova MA, Shapoval AA, Hrudkina NS (2022) Investigation of new method of large ingots forging based on upsetting of workpieces with ledges. Int J Adv Manuf Technol 122(3):1383–139410.1007/s00170-022-09989-1 ↗
11. Saby M, Bouchard P-O, Bernacki M (2015) A geometry-dependent model for void closure in hot metal forming. Finite Elem Anal Des 105:63–7810.1016/j.finel.2015.07.003 ↗
12. Rutskii DV, Stjagin AN, Zyuban NA, Gamanyuk SB (2017) Modelling the behaviour of ingot axial defects under open die forging, in IOP Conference Series: Materials Science and Engineering, IOP Publishing, p. 1208910.1088/1757-899X/177/1/012089 ↗
13. Harris N (2016) Determination of optimal forging conditions for void elimination in large steel ingots
14. Bacon NH (1958) Segregation and Internal Weakness in Forging Ingots
15. Dourandish S, Champliaud H, Morin J-B, Jahazi M (2024) Numerical simulation and experimental validation of microstructure evolution during the upsetting process of a large size martensitic stainless steel forging. IntJ Mater Form 17(4):1–15
16. Erbel S, Kuczyński K, Marciniak Z (1986) Obróbka plastyczna. Państwowe Wydawnictwo Naukowe
17. Jonšta P, Kurka V, Vindyš M, Kander L (2021) The effect of forging conditions on final macrostructure of Slab ingot from the 55NiCrMoV7 tool steel. Met (Basel) 11(3):43510.3390/met11030435 ↗
18. Banaszek G, Ozhmegov K, Kawalek A, Sawicki S, Magzhanov M, Arbuz A (2023) Investigation of the influence of hot forging parameters on the closing conditions of internal metallurgical defects in zirconium alloy ingots. Materials 16(4):142710.3390/ma16041427 ↗
19. Liu Q, Qiu Y, Xin R, Luo J, Ma Q (2023) The Effect of the microstructure formed in the forging–Healing process on the Mechanical properties of Heavy forgings. Materials 16(15):520510.3390/ma16155205 ↗
20. Petrik J, Bambach M (2024) DeepForge: leveraging AI for microstructural control in metal forming via model predictive control. J Manuf Process 121:193–20410.1016/j.jmapro.2024.05.023 ↗
21. Xu B, Sun M, Li D (2012) Modeling of the void close behavior in a 100t ingot during hot forging. Steel Res Int, pp. 215–218
22. Feng C, Cui Z, Liu M, Shang X, Sui D, Liu J (2016) Investigation on the void closure efficiency in cogging processes of the large ingot by using a 3-D void evolution model. J Mater Process Technol 237:371–38510.1016/j.jmatprotec.2016.06.030 ↗
23. Kajtoch J (2007) Strain in the upsetting process. Metall Foundry Eng 33(1):51–6110.7494/mafe.2007.33.1.51 ↗
24. Kukhar V, Artiukh V, Prysiazhnyi A, Pustovgar A (2018) Experimental Research and Method for Calculation of’Upsetting-with-Buckling’Load at the Impression-Free (Dieless) Preforming of Workpiece, in E3S Web of Conferences, EDP Sciences, p. 203110.1051/e3sconf/20183302031 ↗
25. Christiansen P, Hattel JH, Bay N, Martins PAF (2013) Modelling of damage during hot forging of ingots, in International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking
26. Quan G, Zou Z, Zhang Z, Pan J (2016) A study on formation process of secondary upsetting defect in electric upsetting and optimization of processing parameters based on multi-field coupling FEM. Mater Res 19:856–86410.1590/1980-5373-MR-2015-0678 ↗
27. Zhbankov IG, Perig AV (2013) Forging of ingots without hot tops. Mater Manuf Processes 28(3):229–23510.1080/10426914.2012.718472 ↗
28. Markov O, Zlygoriev V, Gerasimenko O, Hrudkina N, Shevtsov S (2018) Improving the quality of forgings based on upsetting the workpieces with concave facets. Восточно-Европейский журнал передовых технологий 5 1:16–24
29. Markov OE (2012) Forging of large pieces by tapered faces. Steel Translation 42(12):80810.3103/S0967091212120054 ↗
30. Banaszek G, Stefanik A (2006) Theoretical and laboratory modelling of the closure of metallurgical defects during forming of a forging. J Mater Process Technol 177:1–310.1016/j.jmatprotec.2006.04.023 ↗
31. Markov OE, Perig AV, Markova MA, Zlygoriev VN (2016) Development of a new process for forging plates using intensive plastic deformation. Int J Adv Manuf Technol 83:2159–217410.1007/s00170-015-8217-5 ↗
32. Markov OE, Perig AV, Zlygoriev VN, Markova MA, Grin AG (2017) A new process for forging shafts with convex dies. Research into the stressed state. Int J Adv Manuf Technol 90:801–81810.1007/s00170-016-9378-6 ↗
33. Markov OE, Kukhar VV, Zlygoriev VN, Shapoval AA, Khvashchynskyi AS, Zhytnikov RU (2020) Improvement of upsetting process of Four-Beam Workpieces based on computerized and physical modeling. FME Trans, 48, 410.5937/fme2004946M ↗
34. Zhang X, Ma F, Ma K, Li X (2012) Multi-scale analysis of void closure for heavy ingot hot forging. Mod Appl Sci 6(10):1510.5539/mas.v6n10p15 ↗
35. Christiansen P, Martins PAF, Bay N, Hattel JH (2014) Multi-objective optimization of die geometry in ingot forging. Procedia Eng 81:2457–246210.1016/j.proeng.2014.10.350 ↗
36. Markov OE, Aliiev IS, Aliieva LI, Hrudkina NS (2020) Computerized and physical modeling of Upsetting Operation by Combined dies. J Chem Technol Metall, 55, 3
37. Markov OE, Oleshko MV, Mishina VI (2011) Development of energy-saving technological process of shafts forging weighting more than 100 tons without ingot upsetting. Metall Min Ind 3(7):87–90
38. Kermanpur A, Eskandari M, Purmohamad H, Soltani MA, Shateri R (2010) Influence of mould design on the solidification of heavy forging ingots of low alloy steels by numerical simulation. Mater Des 31(3):1096–110410.1016/j.matdes.2009.09.045 ↗
39. Rathore SS, Salve MM, Dabhade VV (2015) Effect of molybdenum addition on the mechanical properties of sinter-forged Fe–Cu–C alloys. J Alloys Compd 649:988–99510.1016/j.jallcom.2015.07.156 ↗
40. Narayanasamy R, Anandakrishnan V, Pandey KS (2009) Effect of molybdenum addition on workability of powder metallurgy steels during cold upsetting. Mater Sci Engineering: A 517(1–2):30–3610.1016/j.msea.2009.03.036 ↗
41. Heidarzadeh M, Keshmiri H (2013) Influence of mould and insulation design on soundness of tool steel ingot by numerical simulation, Journal of iron and steel research, international: 20(7):78–8310.1016/S1006-706X(13)60130-2 ↗
42. Joun MS, Moon HG, Choi IS, Lee MC, Jun BY (2009) Effects of friction laws on metal forming processes. Tribol Int 42(2):311–31910.1016/j.triboint.2008.06.012 ↗
43. Ahmadi H, Zohoor M (2017) Investigation of the effective parameters in tube hydroforming process by using experimental and finite element method for manufacturing of tee joint products. Int J Adv Manuf Technol 93:393–40510.1007/s00170-016-9690-1 ↗
44. Jain N, Carlson KD, Beckermann C (2007) Round robin study to assess variations in casting simulation Niyama criterion predictions, in Proceedings of the 61th SFSA Technical nd Operating Conference, paper
45. Bhoraniya D, Dharaiya V, Sata A (2022) Application of Niyama criterion to predict shrinkage porosity in vertical centrifugal casting of ASTM A356 alloy. Int J Process Manage Benchmarking 12(3):395–40610.1504/IJPMB.2022.122231 ↗
46. Niyama E (1982) A method of shrinkage prediction and its application to steel casting practice, in 49th International Foundry Congress
47. Sutaria M, Gada VH, Sharma A, Ravi B (2012) Computation of feed-paths for casting solidification using level-set-method. J Mater Process Technol 212(6):1236–124910.1016/j.jmatprotec.2012.01.019 ↗
48. Carlson K (2004) Yield improvement and defect reduction in steel casting. University of Iowa (US)
49. Sandell PK (2008) Feeding of hollow cylindrical castings, in 68th WFC-World Foundry Congress. 2008: Chennai, India
50. Carlson KD, Beckermann C (2008) Use of the Niyama criterion to predict shrinkage-related leaks in high-nickel steel and nickel-based alloy castings, in 62nd SFSA Technical and Operating Conference; pp. 1–18
51. Zhang Y, Xu C, Liu N, Zhang Y, Xue Z (2021) Effects of weight-compatible design on ingot solidification. Steel Res Int 92(3):200056010.1002/srin.202000560 ↗
52. Wang J, Fu P, Liu H, Li D, Li Y (2012) Shrinkage porosity criteria and optimized design of a 100-ton 30Cr2Ni4MoV forging ingot. Mater Des 35:446–45610.1016/j.matdes.2011.09.056 ↗
53. Nath J (2022) Iron and Steel Castings Engineering Guide. ASM International10.31399/asm.tb.isceg.9781627083324 ↗
54. Abootorabi A, Korojy B, Jabbareh MA (2020) Effect of mould design on the Niyama criteria during solidification of CH3C 80t ingot. Ironmak Steelmaking 47(7):722–73010.1080/03019233.2019.1583879 ↗
55. Carlson KD, Beckermann C (2009) Prediction of shrinkage pore volume fraction using a dimensionless Niyama criterion. Metall Mater Trans A 40:163–17510.1007/s11661-008-9715-y ↗
56. Lee YS, Lee SU, Van Tyne CJ, Joo BD, Moon YH (2011) Internal void closure during the forging of large cast ingots using a simulation approach. J Mater Process Technol 211(6):1136–114510.1016/j.jmatprotec.2011.01.017 ↗
57. McClintock FA (1968) A criterion for ductile fracture by the growth of holes10.1115/1.3601204 ↗
58. Johnson GR, Cook WH (1985) Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng Fract Mech 21(1):31–4810.1016/0013-7944(85)90052-9 ↗
59. Rice JR, Tracey DM (1969) On the ductile enlargement of voids in triaxial stress fields∗. J Mech Phys Solids 17(3):201–21710.1016/0022-5096(69)90033-7 ↗
60. NGL EDF, GenCo NNB (2013) Assessment Report
61. Harris N, Shahriari D, Jahazi M (2016) Analysis of void closure during open die forging process of large size steel ingots. Key Eng Mater 716:579–58510.4028/www.scientific.net/KEM.716.579 ↗