Local High Pressure Torsion: a process for creating targeted heterogeneities in metallic materials
Source abstract
Abstract
Abstract In the light of recent developments in the design of structural materials, micro-architected heterogenous-structure metals are considered among most structurally efficient. In this work, a new technique for Local High Pressure Torsion (L-HPT) enabling the creation of heterogeneous structures through localised deformation processing in sheet metals by impeding a rotating punch is proposed. Using AA5083 aluminium alloy as an example, we show experimentally that the rotation of the punch sets adjacent material layers in motion. This results in more than two-fold increase in material hardness over initial level in the workpiece bulk with rather sharp gradients in hardness level transition. The maximum hardness is observed at the peripheral edge of a punch tip. Finite-element modelling of the L-HPT process confirmed that the rotational flow of workpiece material leads to the accumulation of shear strain. The level of accumulated strain increases with an increase in friction at the contact surface. Further analysis based on dimensionality theory revealed that for such an L-HPT configuration the level of equivalent strain is directly proportional to the ratio of rotation-to-translation speeds at the punch.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Ashby MF (2024) Materials selection in mechanical design, 6 ed., Butterworth-Heinemann
2. Sun Z, Zhou J, Retraint D (2023) Mechanical properties of metallic materials processed by surface severe plastic deformation. Mater Trans 64(8):1739–175310.2320/matertrans.MT-MF2022028 ↗
3. Romero-Resendiz L, Naeem M, Zhu YT (2023) Heterostructured materials by severe plastic deformation: overview and perspectives. Mater Trans 64(10):2346–236010.2320/matertrans.MT-MF2022010 ↗
4. Ameyama K, Cazes F, Couque H, Dirras G, Kikuchi S, Li J, Mompiou F, Mondal K, Orlov D, Sharma B, Tingaud D, Vajpai SK (2022) Harmonic structure, a promising microstructure design. Mater Res Lett 10(7):440–47110.1080/21663831.2022.2057203 ↗
5. Orlov D, Ameyama K (2020) Critical assesment 37: harmonic-structure materials - idea, status and perspectives. Mater Sci Technol 36(5):517–52610.1080/02670836.2020.1719306 ↗
6. Noronha DJ, Sharma S, Prabhu Parkala R, Shankar G, Kumar N, Doddapaneni S (2024) Deep rolling techniques: a comprehensive review of process parameters and impacts on the Material properties of Commercial Steels. Metals 14(6):66710.3390/met14060667 ↗
7. Schulze V (2005) Modern mechanical surface treatment: States, Stability, effects. Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim10.1002/3527607811 ↗
8. Bajakke PA, Jambagi SC, Malik VR, Deshpande AS (2020) Friction stir Processing: an emerging Surface Engineering technique. In: Gupta K (ed) Surface Engineering of Modern materials. Springer International Publishing, Cham, pp 1–31
9. Mishra RS, Ma ZY (2005) Friction stir welding and processing. Mater Sci Engineering: R: Rep 50(1):1–7810.1016/j.mser.2005.07.001 ↗
10. Huang H, Niu J, Xing X, Lin Q, Chen H, Qiao Y (2022) Effects of the shot peening process on Corrosion Resistance of Aluminum Alloy: a review. Coatings 12(5):62910.3390/coatings12050629 ↗
11. Zykova AP, Tarasov SY, Chumaevskiy AV, Kolubaev EA (2020) A review of Friction stir Processing of Structural Metallic materials: process, Properties, and methods. Metals 10(6):77210.3390/met10060772 ↗
12. Wu X, Zhu Y, Lu K (2020) Ductility and strain hardening in gradient and lamellar structured materials. Scripta Mater 186:321–32510.1016/j.scriptamat.2020.05.025 ↗
13. Butz GA, Lyst JO (1961) Improvement In Fatigue resistance of Aluminum Alloys by Surface Cold Working. Mater Res Stand 1961002
14. Zhu Y, Ameyama K, Anderson PM, Beyerlein IJ, Gao H, Kim HS, Lavernia E, Mathaudhu S, Mughrabi H, Ritchie RO, Tsuji N, Zhang X, Wu X (2021) Heterostructured materials: superior properties from hetero-zone interaction. Mater Res Lett 9(1):1–3110.1080/21663831.2020.1796836 ↗
15. Edalati K, Ahmed AQ, Akrami S, Ameyama K, Aptukov V, Asfandiyarov RN, Ashida M, Astanin V, Bachmaier A, Beloshenko V, Bobruk EV, Bryła K, Cabrera JM, Carvalho AP, Chinh NQ, Choi I-C, Chulist R, Cubero-Sesin JM, Davdian G, Demirtas M, Divinski S, Durst K, Dvorak J, Edalati P, Emura S, Enikeev NA, Faraji G, Figueiredo RB, Floriano R, Fouladvind M, Fruchart D, Fuji M, Fujiwara H, Gajdics M, Gheorghe D, Gondek Ł, González-Hernández JE, Gornakova A, Grosdidier T, Gubicza J, Gunderov D, He L, Higuera OF, Hirosawa S, Hohenwarter A, Horita Z, Horky J, Huang Y, Huot J, Ikoma Y, Ishihara T, Ivanisenko Y, Jang J-i, Jorge AM, Kawabata-Ota M, Kawasaki M, Khelfa T, Kobayashi J, Kommel L, Korneva A, Kral P, Kudriashova N, Kuramoto S, Langdon TG, Lee D-H, Levitas VI, Li C, Li H-W, Li Y, Li Z, Lin H-J, Liss K-D, Liu Y, Cardona DMM, Matsuda K, Mazilkin A, Mine Y, Miyamoto H, Moon S-C, Müller T, Muñoz JA, Murashkin MY, Naeem M, Novelli M, Olasz D, Pippan R, Popov VV, Popova EN, Purcek G, de Rango P, Renk O, Retraint D, Révész Á, Roche V, Rodriguez-Calvillo P, Romero-Resendiz L, Sauvage X, Sawaguchi T, Sena H, Shahmir H, Shi X, Sklenicka V, Skrotzki W, Skryabina N, Staab F, Straumal B, Sun Z, Szczerba M, Takizawa Y, Tang Y, Valiev RZ, Vozniak A, Voznyak A, Wang B, Wang JT, Wilde G, Zhang F, Zhang M, Zhang P (2024) J Alloys Compd 1002:174667 J. Zhou, X. Zhu, Y.T. Zhu, Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review10.1016/j.jallcom.2024.174667 ↗
16. Matsutani R, Sakuragi T, Yamagishi N, Miyazawa N, Nakada N, Onaka S (2021) SEM/EBSD Analysis of Grain Refinement and Coarsening of Ultra-fine-grained Al during simple Shear deformation. Mater Trans 62(7):921–92810.2320/matertrans.MT-M2021026 ↗
17. Estrin Y, Vinogradov A (2013) Extreme grain refinement by severe plastic deformation: a wealth of challenging science. Acta Mater 61(3):782–81710.1016/j.actamat.2012.10.038 ↗
18. Beygelzimer Y, Filippov A, Estrin Y (2023) Turbulent’ shear flow of solids under high-pressure torsion. Phil Mag 103(11):1017–102810.1080/14786435.2023.2180681 ↗
19. Edalati K, Bachmaier A, Beloshenko VA, Beygelzimer Y, Blank VD, Botta WJ, Bryła K, Čížek J, Divinski S, Enikeev NA, Estrin Y, Faraji G, Figueiredo RB, Fuji M, Furuta T, Grosdidier T, Gubicza J, Hohenwarter A, Horita Z, Huot J, Ikoma Y, Janeček M, Kawasaki M, Král P, Kuramoto S, Langdon TG, Leiva DR, Levitas VI, Mazilkin A, Mito M, Miyamoto H, Nishizaki T, Pippan R, Popov VV, Popova EN, Purcek G, Renk O, Révész Á, Sauvage X, Sklenicka V, Skrotzki W, Straumal BB, Suwas S, Toth LS, Tsuji N, Valiev RZ, Wilde G, Zehetbauer MJ, Zhu X (2022) Nanomaterials by severe plastic deformation: review of historical developments and recent advances. Mater Res Lett 10(4):163–25610.1080/21663831.2022.2029779 ↗
20. Zhilyaev AP, Langdon TG (2008) Using high-pressure torsion for metal processing: fundamentals and applications. Prog Mater Sci 53(6):893–97910.1016/j.pmatsci.2008.03.002 ↗
21. Bridgman PW (1935) Effects of high shearing stress combined with high hydrostatic pressure. Phys Rev 48(10):825–84710.1103/PhysRev.48.825 ↗
22. Beygelzimer Y, Orlov D, Baretzky B, Estrin Y, Vinogradov A, Kulagin R (2024) Surface sliding revealed by operando monitoring of high-pressure torsion by acoustic emission. Mater Lett 363:13630310.1016/j.matlet.2024.136303 ↗
23. Edalati K, Horita Z, Langdon TG (2009) The significance of slippage in processing by high-pressure torsion. Scripta Mater 60(1):9–1210.1016/j.scriptamat.2008.08.042 ↗
24. Limited MS (2024) QForm 3D. https://www.qform3d.com/. 2024.08.31)
25. Bomarito GF, Warner DH (2015) Micromechanical investigation of ductile failure in Al 5083-H116 via 3D unit cell modeling. J Mech Phys Solids 74:97–11010.1016/j.jmps.2014.10.007 ↗
26. Nielsen CV, Bay N (2018) Review of friction modeling in metal forming processes. J Mater Process Technol 255:234–24110.1016/j.jmatprotec.2017.12.023 ↗
27. Levanov AN (1997) Improvement of metal forming processes by means of useful effects of plastic friction. J Mater Process Technol 72(2):314–31610.1016/S0924-0136(97)00191-X ↗
28. Song Y, Wang W, Gao D, Yoon EY, Lee DJ, Kim HS (2014) Finite element analysis of the effect of friction in high pressure torsion. Met Mater Int 20(3):445–45010.1007/s12540-014-3007-4 ↗
29. Beygelzimer Y, Estrin Y, Davydenko O, Kulagin R (2023) Gripping prospective of Non-shear flows under high-pressure torsion. Materials 16(2):82310.3390/ma16020823 ↗
30. Kachanov LM (2004) Fundamentals of the theory of plasticity. Dover, Mineola, NY, USA
31. Oguocha INA, Adigun OJ, Yannacopoulos S (2008) Effect of sensitization heat treatment on properties of Al–Mg alloy AA5083-H116. J Mater Sci 43(12):4208–421410.1007/s10853-008-2606-1 ↗
32. Beygelzimer Y, Varyukhin V, Kulagin R, Orlov D (2017) Twist extrusion. In: Rosochowski A (ed) Severe Plastic Deformation Technology. Whittles Publishing, Dunbeath, Scotland, pp 202–234
33. Valiev RZ, Langdon TG (2006) Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog Mater Sci 51(7):881–98110.1016/j.pmatsci.2006.02.003 ↗
34. Sedov LI (1993) Similarity and dimensional methods in mechanics, 10th edn. CRC
35. Hu B, Yoshida S, Gaffney J (2011) Stress and strain analysis of metal plates with holes, Springer New York, New York, NY, pp. 187–19310.1007/978-1-4419-8228-5_27 ↗
36. Almeida JHS, Bittrich L, Spickenheuer A (2020) Improving the open-hole tension characteristics with variable-axial composite laminates: optimization, progressive damage modeling and experimental observations. Compos Sci Technol 185:10788910.1016/j.compscitech.2019.107889 ↗
37. Wang Z-Y, Wang Q-Y, Cao M (2017) Experimental study on fatigue Behaviour of Shot-Peened Open-Hole Steel plates. Materials 10(9):99610.3390/ma10090996 ↗
38. Sjögren-Levin E, Pantleon W, Ahadi A, Hegedüs Z, Lienert U, Tsuji N, Ameyama K, Orlov D (2024) Grain-level mechanism of plastic deformation in harmonic structure materials revealed by high-resolution X-ray diffraction. Acta Mater 265:11962310.1016/j.actamat.2023.119623 ↗