Analytical and finite element simulation studies on earing profile of Ti-6Al-4V deep drawn cups at elevated temperatures
Source abstract
Abstract
Rolled sheet metal alloys exhibit plastic anisotropy, which leads to the formation of ears during the deep drawing process. An analytical function proposed by Yoon et al. (Int J Plast 27(8):1165–1184, 2011) predicts earing profile based on yield stress and r value directionalities for circular cup drawing. In this study, this analytical approach is applied for a deep drawing of Ti-6Al-4V at elevated temperatures up to 400 °C. Three yield criteria namely, Hill 1948, Barlat 1989 and Barlat Yld2000-2d are used to obtain the directionality inputs for the analytical formula. The analytical model is validated using experimental results and FE simulations and is found to be closely matched while requiring very less CPU time. FE simulation has been also conducted with various yield functions. Barlat Yld2000-2d is considered to be the most suitable yield criterion for very accurate earing prediction in deep drawing of Ti-6Al-4V as the inputs for both the analytical and FEM models.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Johnson OT, Awopetu OO, Dahunsi OA (2013) Enhancement of microstructural and hardness properties of commercially pure Titanium (Ti-0.5Zn) by thermomechanical processing. Adv Mater Res 824(2013):275–28210.4028/www.scientific.net/AMR.824.275 ↗
2. Li X, Guo G, Xiao J, Song N, Li D (2014) Constitutive modeling and the effects of strain-rate and temperature on the formability of Ti–6Al–4V alloy sheet. Mater Des 55:325–33410.1016/j.matdes.2013.09.069 ↗
3. Naka T, Uemori T, Hino R, Kohzu M, Higashi K, Yoshida F (2008) Effects of strain rate, temperature and sheet thickness on yield locus of AZ31 magnesium alloy sheet. J Mater Process Technol 201(1–3):395–40010.1016/j.jmatprotec.2007.11.189 ↗
4. Kotkunde N, Deole AD, Gupta AK, Singh SK (2014) Experimental and numerical investigation of anisotropic yield criteria for warm deep drawing of Ti–6Al–4V alloy. Mater Des 63(2014):336–34410.1016/j.matdes.2014.06.017 ↗
5. Yoon J-H, Cazacu O, Whan Yoon J, Dick RE (2010) Earing predictions for strongly textured aluminum sheets. Int J Mech Sci 52(12):1563–157810.1016/j.ijmecsci.2010.07.005 ↗
6. Chung K, Shah K (1992) Finite element simulation of sheet metal forming for planar anisotropic metals. Int J Plast 8(4):453–47610.1016/0749-6419(92)90059-L ↗
7. Yoon J-W, Barlat F, Dick RE, Chung K, Kang TJ (2004) Plane stress yield function for aluminum alloy sheets—part II: FE formulation and its implementation. Int J Plast 20(3):495–52210.1016/S0749-6419(03)00099-8 ↗
8. Yoon JW, Dick RE, Barlat F (2011) A new analytical theory for earing generated from anisotropic plasticity. Int J Plast 27(8):1165–118410.1016/j.ijplas.2011.01.002 ↗
9. Barlat F, Panchanadeeswaran S, Richmond O (1991) Earing in cup drawing face-centered cubic single crystals and polycrystals. Metall Mater Trans A-physical Metall Mater Sci 22(7):1525–153410.1007/BF02667366 ↗
10. Yoon JW, Barlat F, Dick RE, Karabin ME (2006) Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function. Int J Plast 22(1):174–19310.1016/j.ijplas.2005.03.013 ↗
11. Hill R (1950) A theory of the yielding and plastic flow of anisotropic metals. Proc R Soc London A 193:281
12. Hill R (1993) A user-friendly theory of orthotropic plasticity in sheet metals. Int J Mech Sci 35(1):19–2510.1016/0020-7403(93)90061-X ↗
13. Barlat F, Lian J (1989) Plastic behavior and stretchability of sheet metals. Part h a yield function for orthotropic sheets under plane stress conditions ll ~ t in order to simulate forming processes, the mechanics of continuua offers several gen- eral equations that apply to. Int J Plast 5:51–6610.1016/0749-6419(89)90019-3 ↗
14. Barlat F, Brem JC, Yoon JW, Chung K, Dick RE (2002) Plane stress yield function for aluminum alloy sheets — part 1: theory. Int J Plast 19(2003):1297–1319
15. Cazacu O, Plunkett B, Barlat F (2006) Orthotropic yield criterion for hexagonal closed packed metals. Int J Plast 22(7):1171–119410.1016/j.ijplas.2005.06.001 ↗
16. Kotkunde N, Krishnamurthy HN, Puranik P, Gupta AK, Singh SK (2014) Microstructure study and constitutive modeling of Ti–6Al–4V alloy at elevated temperatures. Mater Des 54:96–10310.1016/j.matdes.2013.08.006 ↗
17. Odenberger E-L, Schill M, Oldenburg M (2013) Thermo-mechanical sheet metal forming of aero engine components in Ti-6Al-4V—PART 2: constitutive modelling and validation. Int J Mater Form 6(3):403–41610.1007/s12289-012-1094-7 ↗
18. Banabic D (2010) Sheet Metal Forming Processes: Constitutive Modelling and Numerical Simulation. pp 27-140. Springer Berlin Heidelberg. doi: 10.1007/978-3-540-88113-1_210.1007/978-3-540-88113-1_2 ↗
19. Singh SK, Mahesh K, Kumar A, Swathi M (2010) Understanding formability of extra-deep drawing steel at elevated temperature using finite element simulation. Mater Des 31(9):4478–448410.1016/j.matdes.2010.04.049 ↗
20. Chandra Mohan Reddy G, Ravindra Reddy PVR, Janardhan Reddy TA (2010) Finite element analysis of the effect of coefficient of friction on the drawability. Tribol Int 43(5–6):1132–113710.1016/j.triboint.2009.12.024 ↗