Performance of carbide cutting tools when machining of nickel based alloy
Source abstract
Abstract
This paper was investigated the behavior of cutting tools when machining of nickel based alloys 242. Experiments were conducted using four different cutting tool materials under wet condition. Tool failure modes and wear mechanism were examined at various cutting parameters. Flank wear found to be the predominant tool wear for all cutting tools especially with CVD tools. Attrition lead to exposure and build up edge of the wear mechanisms were observed in all cutting tools. Coating is observed to be delaminated as main phenomena on cutting tools surfaces. The obtained results are PVD cutting tools perform better than CVD in terms of tool life with machining parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Stephenson, D.A. and J.S. Agapiou. 1997. Metal cutting theory and practice. Marcel Dekker, Inc. ISSBN:0-8247-9579-2
2. Rahman, M., W.K.H. Seath and T.T.Teoh. 1997. The machinability of Inconel 718. J. Mater. Process. Technol., 63: 199 – 204. doi: 10.1016/S0924-0136(96)02624-610.1016/S0924-0136(96)02624-6 ↗
3. Chandrasekaran, H. 1985. Thermal Fatigue on Tool Carbides and its Relevance of Milling Cutters. Annals of the CIRP, 34: 125-128. doi: 10.1016/S0007-8506(07)61739-910.1016/S0007-8506(07)61739-9 ↗
4. Bahatia, S.M., P.C. Pandey and H.S. Shaw. 1978. Thermal cracking of carbide tools during intermittent cutting. Wear, 51(2): 201-211. doi: 10.1016/0043-1648(78)90260-010.1016/0043-1648(78)90260-0 ↗
5. The, J. H. L.1977. High–Speed Films of the Incipient Cutting Process in Machining at Conventional Speeds. Int. J. Engg. Indus., ASME, 99: 263-268.10.1115/1.3439149 ↗
6. Kabaldin, Y. G. 1980. Temperature and Adhesion in Continuous and Interrupted Machining. Machines and Tooling, 51(4): 33-36.
7. Caldeirani F.J. 1998. Study and monitoring of face milling process with indexable insert mills. Doctoral Thesis, State University of Compinas, Brazil, 147p
8. Bawa, H.S. 1995. Workshop Technology. Tata McGraw-Hill, India. ISBN:9780070671195
9. Liao, Y.S. and R.H. Shiue. 1996. Carbide tool wear mechanism in turning of Inconel 718 superalloy. Wear, 193: 16–24. doi: 10.1016/0043-1648(95)06644-610.1016/0043-1648(95)06644-6 ↗
10. HAYNES, Haynes International catalogue, Haynes 242 data, 2007.
11. ISO 8688-2:1989 End mill testing [12]KENNAMETAL, Kennametal cutting tool catalague, 2007
12. Jindal, P.C., A.T. Santhanam, Schleinkofer and A.F. Shuster. 1999. Performance of PVD TiN, TiCN and TiAlN coated cemented carbide tools in turning. Int. J. Refract. Metals Hard Mater. 17: 163–170.
13. Ezugwu, E.O. and Z.M. Wang. 1996. Performance of PVD and CVD coated tools when machining nickel-based, Inconel 718 alloy. Progress Cutting Grinding, 111: 102–107.
14. Ostwald, K. 1995. Technology of machine tools. Fourth Edition. McGraw –Hill, New York. ISBN: 0077232259
15. McCabe, M.J. 2001. How PVD coatings can improve high speed machining, High speed machining conference. SME, Northbrook, IL. September 20 -21.
16. Sharman, A., R.C. Dewes and D.K. Aspinwall. 2001. Tool life when high speed ball nose end milling of Inconel 718TM. J. Mater. Process. Technol. 118: 29–35. doi: 10.1016/S0924-0136(01)00855-X10.1016/S0924-0136(01)00855-X ↗