A simple ductile failure model with application to AA5182 aluminium sheet forming
Source abstract
Abstract
In the present work the recently introduced Joined Ductile Failure (JDF) model has been slightly improved and is applied to sheet forming of an AA5182 aluminium alloy. Despite its simplicity the validation examples documented in the present work reveal that the JDF model is able of accurately predicting the onset as well as the location of ductile failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Aretz H, Barlat F (2004) General orthotropic yield functions based on linear stress deviator transformations. In: Ghosh S, Lee JK, Castro JC (eds) Proc. 8th international conference on numerical methods in industrial forming processes - NUMIFORM 2004, AIP Conf. Proc., vol 712, pp 147–15610.1063/1.1766515 ↗
2. Aretz H (2006) A less hypothetical perspective on rate-independent continuum theory of metal plasticity. Mech Res Commun 33:734–73810.1016/j.mechrescom.2006.01.006 ↗
3. Aretz H (2007) Numerical analysis of diffuse and localized necking in orthotropic sheet metals. Int J Plast 23:798–84010.1016/j.ijplas.2006.07.005 ↗
4. Aretz H (2007) A consistent plasticity theory of incompressible and hydrostatic pressure sensitive metals. Mech Res Commun 34:344–35110.1016/j.mechrescom.2007.01.002 ↗
5. Aretz H (2008) A simple isotropic-distortional hardening model and its application in elastic-plastic analysis of localized necking in orthotropic sheet metals. Int J Plast 24:1457–148010.1016/j.ijplas.2007.10.002 ↗
6. Aretz H, Keller S, Vogt R, Engler O (2009) Advanced modelling of failure mechanisms in aluminium sheet forming simulation. Int J Mater Form 2(1):355–358. doi: 10.1007/s12289-009-0443-710.1007/s12289-009-0443-7 ↗
7. Aretz H (2010) An extension of Hill’s localized necking model. Int J Eng Sci 48:312–33110.1016/j.ijengsci.2009.09.007 ↗
8. Aretz H, Aegerter J, Engler O (2010) Analysis of earing in deep drawn cups. In: Barlat F, Moon YH, Lee MG (eds) Proc. 10th international conference on numerical methods in industrial forming processes - NUMIFORM 2010, AIP Conf. Proc., vol 1252, pp 417–424
9. Aretz H, Keller S, Vogt R, Engler O (2011) Modelling of ductile failure in aluminium sheet forming simulation. Int J Mater Form 4:163–18210.1007/s12289-010-1021-8 ↗
10. Aretz H, Engler O (2011) Efficient and robust prediction of localized necking in sheet metals. In: Chung K, Han HN, Huh H, Barlat F, Lee M-G (eds) Proc. 8th international conference and workshop on numerical simulation of 3d sheet metal forming processes (NUMISHEET 2011), AIP Conf. Proc., vol 1383, Seoul, pp 453–46010.1063/1.3623644 ↗
11. Aretz H, Barlat F (2012) Unconditionally convex yield functions for sheet metal forming based on linear stress deviator transformation. Key Eng Mater 504–506:667–67210.4028/www.scientific.net/KEM.504-506.667 ↗
12. Aretz H, Barlat F (2013) New convex yield functions for orthotropic metal plasticity. Int J Non-Linear Mech 51:97–11110.1016/j.ijnonlinmec.2012.12.007 ↗
13. Arrieux R (1995) Determination and use of the forming limit stress diagrams in sheet metal forming. J Mater Process Technol 53:47–5610.1016/0924-0136(95)01960-M ↗
14. Banabic D, Soare S (2008) On the effect of the normal pressure upon the forming limit strains. In: Proc. 7th international conference and workshop on numerical simulation of 3d sheet metal forming processes (NUMISHEET 2008), vol 2008, Interlaken, pp 199–204
15. Barlat F (1987) Crystallographic texture, anisotropic yield surfaces and forming limits of sheet metals. Mater Sci Eng 91:55–7210.1016/0025-5416(87)90283-7 ↗
16. Barlat F, Lian J (1989) Plastic behaviour and stretchability of sheet metals. Part II: effect of yield surface shape on forming limit. Int J Plast 5:131–14710.1016/0749-6419(89)90019-3 ↗
17. Barlat F, Aretz H, Yoon JW, Karabin ME, Brem JC, Dick RE (2005) Linear transfomation-based anisotropic yield functions. Int J Plast 21:1009–103910.1016/j.ijplas.2004.06.004 ↗
18. Beese AM, Luo M, Li Y, Bai Y, Wierzbicki T (2010) Partially coupled anisotropic fracture model for aluminum sheets. Eng Fract Mech 77:1128–115210.1016/j.engfracmech.2010.02.024 ↗
19. Chan KS (1985) Effects of plastic anisotropy and yield surface shape on sheet metal stretchability. Metall and Mater Trans A 16A:629–63910.1007/BF02814237 ↗
20. Chung K, Wagoner RH (1988) Effects of work-hardening and rate sensitivity on the sheet tensile test. Metall and Mater Trans A 19A:293–30010.1007/BF02652538 ↗
21. Chung K, Ma N, Park T, Kim D, Yoo D, Kim C (2011) A modified damage model for advanced high strength steel sheets. Int J Plast 27:1485–151110.1016/j.ijplas.2011.01.007 ↗
22. Clift SE, Hartley P, Sturgess CEN, Rowe GW (1990) Fracture prediction in plastic deformation processes. Int J Mech Sci 32:1–1710.1016/0020-7403(90)90148-C ↗
23. Clift SE (1992) Fracture in forming processes. In: Hartley P, Pillinger I, Sturgess C (eds) Numerical modelling of material deformation processes. Springer-Verlag10.1007/978-1-4471-1745-2_16 ↗
24. Emmens WC (2011) Formability – a review of parameters and processes that control, limit or enhance the formability of sheet metal. Springer-Verlag10.1007/978-3-642-21904-7 ↗
25. Firat M (2012) A finite element modeling and prediction of stamping formability of a dual-phase steel in cup drawing. Mater Des 34:32–3910.1016/j.matdes.2011.07.038 ↗
26. Friedman PA, Pan J (2000) Effects of plastic anisotropy and yield criteria on prediction of forming limit curves. Int J Mech Sci 42:29–4810.1016/S0020-7403(98)00114-3 ↗
27. Giagmouris T, Kyriakides S, Korkolis YP, Lee L-H (2010) On the localization and failure in aluminum shells due to crushing induced bending and tension. Int J Solids Struct 47:2680–269210.1016/j.ijsolstr.2010.05.023 ↗
28. Graf A, Hosford W (1994) The influence of strain-path changes on forming limit diagrams of Al 6111 T4. Int J Mech Sci 36:897–91010.1016/0020-7403(94)90053-1 ↗
29. Gruben G, Hopperstad OS, Børvik T (2012) Evaluation of uncoupled ductile fracture criteria for the dual-phase steel Docol 600DL. Int J Mech Sci 62:133–14610.1016/j.ijmecsci.2012.06.009 ↗
30. Hill R (1950) A theory of the plastic bulging of a metal diaphragm by lateral pressure. Phil Mag 41:1133–114210.1080/14786445008561154 ↗
31. Hill R (1952) On discontinuous plastic states, with special reference to localized necking in thin sheets. J Mech Phys of Solids 1:19–3010.1016/0022-5096(52)90003-3 ↗
32. Hosford WF, Caddell RM (1993) Metal forming – mechanics and metallurgy, 2nd edn. Prentice Hall
33. Hosford WF (2010) Mechanical behavior of materials, 2nd edn. Cambridge University Press, New York
34. Jain M, Allin J, Lloyd DJ (1999) Fracture limit prediction using ductile fracture criteria for forming of an automotive aluminum sheet. Int J Mech Sci 41:1273–128810.1016/S0020-7403(98)00070-8 ↗
35. Kachanov LM (2004) Fundamentals of the theory of plasticity. Dover
36. Karhausen KF, Aretz H, Nitzsche G (2012) Bedeutung der Fertigungskette für die Werkstoffeigenschaften und Oberflächenqualität von Al-Automobilband. In: Liewald M (ed) Proc. of the international conference on new developments in sheet metal forming, Fellbach, pp 201–230
37. Khan AS, Liu H (2012) A new approach for ductile fracture prediction on Al 2024-T351 alloy. Int J Plast 35:1–1210.1016/j.ijplas.2012.01.003 ↗
38. Keller S, Hotz W, Friebe H (2009) Yield curve determination using the bulge test combined with optical measurement Proc. International Conference of the International Deep Drawing Research Group (IDDRG). Golden, CO
39. Kestner SC, Koss DA (1987) On the influence of strain-path changes on fracture. Metall and Mater Trans A 18A:637–63910.1007/BF02649479 ↗
40. Kohara S (2005) Influence of strain path on the forming-limit curve in aluminum. Metall and Mater Trans A 36A:1033–103710.1007/s11661-005-0296-8 ↗
41. Kuroda M, Tvergaard V (2000) Effect of strain path changes on limits to ductility of anisotropic metal sheets. Int J Mech Sci 42:867–88710.1016/S0020-7403(99)00029-6 ↗
42. Lange K (1984) Umformtechnik – Band 1: Grundlagen, 2nd edn. Springer-Verlag, Berlin, Heidelberg10.1007/978-3-642-61760-7 ↗
43. Lebensohn RA, Tomé CN (1993) A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys. Acta Metall Mater 41:2611–262410.1016/0956-7151(93)90130-K ↗
44. Lemaitre J, Desmorat R (2005) Engineering damage mechanics – ductile, creep, fatigue and brittle failures. Springer-Verlag, Berlin, Heidelberg
45. Li Y, Wierzbicki T (2010) Prediction of plane strain fracture of AHSS sheets with post-initiation softening. Int J Solids Struct 47:2316–232710.1016/j.ijsolstr.2010.04.028 ↗
46. Li Y, Luo M, Gerlach J, Wierzbicki T (2010) Prediction of shear-induced fracture in sheet metal forming. J Mater Process Technol 210:1858–186910.1016/j.jmatprotec.2010.06.021 ↗
47. Lingbeek RA, Meinders T, Rietman A (2008) Tool and blank interaction in the cross-die forming process. In: Proc. 11th ESAFORM conference on material forming, Lyon10.1007/s12289-008-0016-1 ↗
48. Lou Y, Huh H, Lim S, Pack K (2012) New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals. Int J Solids Struct 49:3605–361510.1016/j.ijsolstr.2012.02.016 ↗
49. Lu ZH, Lee D (1987) Prediction of history-dependent forming limits by applying different hardening models. Int J Mech Sci 29:123–13710.1016/0020-7403(87)90047-6 ↗
50. Marciniak Z, Kuczyński K (1967) Limit strains in the process of stretch-forming sheet metal. Int J Mech Sci 9:609–62010.1016/0020-7403(67)90066-5 ↗
51. Marciniak Z, Kuczyński K, Pokora T (1973) Influence of the plastic properties of a material on the forming limit diagram for sheet metal in tension. Int J Mech Sci 15:789–80510.1016/0020-7403(73)90068-4 ↗
52. Marciniak Z, Duncan JL, Hu SJ (2002) Mechanics of Sheet Metal Forming, 2nd edn. Butterworth-Heinemann
53. Müschenborn W, Sonne H-M (1975) Einfluß des Formänderungsweges auf die Grenzformänderungen des Feinblechs. Archiv des Eisenhüttenwesens 46:597–60210.1002/srin.197503686 ↗
54. Nurcheshmeh M, Green DE (2011) Investigation on the strain-path dependency of stress-based forming limit curves. Int J Mater Form 4:25–3710.1007/s12289-010-0989-4 ↗
55. Nurcheshmeh M, Green DE (2012) Influence of out-of-plane compression stress on limit strains in sheet metals. Int J Mater Form 5:213–22610.1007/s12289-011-1044-9 ↗
56. Oyane M, Sato T, Okimoto K, Shima S (1980) Criteria for ductile fracture and their applications. J Mech Work Technol 4:65–8110.1016/0378-3804(80)90006-6 ↗
57. Ozturk F, Lee D (2004) Analysis of forming limits using ductile fracture criteria. J Mater Process Technol 147:397–40410.1016/j.jmatprotec.2004.01.014 ↗
58. Signorelli JW, Bertinetti MA (2009) On the role of constitutive model in the forming limit of FCC sheet metal with cube orientations. Int J Mech Sci 51:473–48010.1016/j.ijmecsci.2009.04.002 ↗
59. Stoughton TB (2000) A general forming limit criterion for sheet metal forming. Int J Mech Sci 42:1–2710.1016/S0020-7403(98)00113-1 ↗
60. Stoughton TB, Zhu X (2004) Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD. Int J Plast 20:1463–148610.1016/j.ijplas.2003.11.004 ↗
61. Stoughton TB, Yoon J-W (2011) A new approach for failure criterion for sheet metals. Int J Plast 27:440–45910.1016/j.ijplas.2010.07.004 ↗
62. Suh CH, Jung Y-C, Kim YS (2010) Effects of thickness and surface roughness on mechanical properties of aluminum sheets. J Mech Sci Technol 24:2091–209810.1007/s12206-010-0707-7 ↗
63. Tvergaard V (1978) Effect of kinematic hardening on localized necking in biaxially stretched sheets. Int J Mech Sci 20:651–65810.1016/0020-7403(78)90023-1 ↗
64. Volokh KY (2012) Characteristic length of damage localization in steel. Eng Fract Mech 94:85–8610.1016/j.engfracmech.2012.07.010 ↗
65. Wagoner RH, Chenot J-L (2001) Metal forming analysis. Cambridge University Press10.1017/CBO9781139087070 ↗
66. Wierzbicki T, Bao Y, Lee Y-W, Bai Y (2005) Calibration and evaluation of seven fracture models. Int J Mech Sci 47:719–74310.1016/j.ijmecsci.2005.03.003 ↗
67. Xu S, Weinmann KJ (2000) Effect of deformation-dependent material parameters on forming limits of thin sheets. Int J Mech Sci 42:677–69210.1016/S0020-7403(99)00016-8 ↗
68. Xue L, Wierzbicki T (2009) Numerical simulation of fracture mode transition in ductile plates. Int J Solids Struct 46:1423–143510.1016/j.ijsolstr.2008.11.009 ↗
69. Zeng D, Chappuis L, Xia Z, Zhu X (2009) A path independent forming limit criterion for sheet metal forming simulations, SAE. Int J Mater Manuf 1:809–817. doi: 10.4271/2008-01-144510.4271/2008-01-1445 ↗