Genetic algorithm-Based particle swarm optimization of RSM surrogate models for multi-responses of EDM machining parameters of silicon nitride-titanium nitride composite
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Hydraulic and Pneumatic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Baba S, Goto T, Cho S, Sekino T (2018) Microstructure and mechanical properties of TiN dispersed Si3 N4 ceramics via in-situ nitridation of coarse metallic Ti Építő Anyag. J Silicate Based Compos Mater 70(6):195–203. https://doi.org/10.14382/epitoanyag-jsbcm.2018.3410.14382/epitoanyag-jsbcm.2018.34 ↗
2. Srinivasan VP, Palani PK, Balamurugan S (2021) Experimental investigation on EDM of Si3N4 + TiN using grey relational analysis coupled with teaching-learning-based optimization algorithm. Ceram Int 47(13):19153–19168. https://doi.org/10.1016/j.ceramint.2021.03.26210.1016/j.ceramint.2021.03.262 ↗
3. Selvarajan L, Sathiya Narayanan C, Jeyapaul R, Manohar M (2016) Optimization of EDM process parameters in machining Si3N4–TiN conductive ceramic composites to improve form and orientation tolerances. Measurement 92:114–129. https://doi.org/10.1016/j.measurement.2016.05.01810.1016/j.measurement.2016.05.018 ↗
4. Tingzhang Wang C, Wu H, Liu M, Chen J, Cheng S, Dingning (2020) On-machine electric discharge truing of small ball-end fine diamond grinding wheels. J Mater Process Technol 277:11647. https://doi.org/10.1016/j.jmatprotec.2019.11647210.1016/j.jmatprotec.2019.116472 ↗
5. Ming W, Zhang Z, Wang S, Zhang Y, Shen F, Zhang G (2016) Comparative study of energy efficiency and environmental impact in magnetic field assisted and conventional electrical discharge machining. J Clean Prod 214:12–28. https://doi.org/10.1016/j.jclepro.2018.12.23110.1016/j.jclepro.2018.12.231 ↗
6. Kharwar PK, Rajesh Kumar Verma (2020) Machining performance optimization in drilling of multiwall carbon nano tube/epoxy nanocomposites using GRA-PCA hybrid approach. Measurement 158:107701. https://doi.org/10.1016/j.measurement.2020.10770110.1016/j.measurement.2020.107701 ↗
7. Rami Alfattani M, Yunus T, Alamro, Ibrahim A, Alnaser (2021) Multi response optimization of linkage parameters of a compliant mechanism using hybrid genetic algorithm-based swarm intelligence. Comput Intell Neurosci. 2021: 17. https://doi.org/10.1155/2021/447199510.1155/2021/4471995 ↗
8. Selvarajan L, Venkataramanan K, Nair A, Srinivasan VP (2023) Simultaneous multi-response Jaya optimization and Pareto front visualization in EDM drilling of MoSi2-SiC composites. Expert Syst Appl 230:120669. https://doi.org/10.1016/j.eswa.2023.12066910.1016/j.eswa.2023.120669 ↗
9. Selvarajan L, Venkataramanan K, Perumal KPS, Yunus M, Alfattani R, Aravindhan A (2023) A review of spark erosion machining efficiency, characterization and optimization techniques for ceramic composites. Compos Interfaces 31(4):485–536. https://doi.org/10.1080/09276440.2023.226896710.1080/09276440.2023.2268967 ↗
10. Jain S, Parashar V (2021) Critical review on the impact of EDM process on biomedical materials. Mater Manuf Process 36(15):1701–1724. https://doi.org/10.1080/10426914.2021.194290710.1080/10426914.2021.1942907 ↗
11. Tran VT, Le MH, Vo MT, Le QT, Hoang VH, Tran NT, Nguyen TT (2023) Optimization design for die-sinking EDM process parameters employing effective intelligent method. Cogent Engineering. https://doi.org/10.1080/23311916.2023.226406010.1080/23311916.2023.2264060 ↗
12. Tufail MS, Giri J, Makki E, Sathish T, Chadge R, Sunheriya N (2024) Machinability of different cutting tool materials for electric discharge machining: a review and future prospects. AIP Adv 14:040702. https://doi.org/10.1063/5.020161410.1063/5.0201614 ↗
13. Huang X, Jiang F, Wang Z, Wu X, Huang S, Liu Y, Zhang J, Shi X (2020) A review on the balancing design of micro drills. Int J Adv Des Manuf Technol 126:4849. https://doi.org/10.1007/s00170-023-11496-w10.1007/s00170-023-11496-w ↗
14. Deshwal S, Kumar A, Chhabra D (2020) Exercising hybrid statistical tools GA-RSM, GA-ANN and GA-ANFIS to optimize FDM process parameters for tensile strength improvement. CIRP J Manuf Sci Technol 31:189. https://doi.org/10.1016/j.cirpj.2020.05.00910.1016/j.cirpj.2020.05.009 ↗
15. Ukey K, Rameshchandra Sahu A, Sheshrao Gajghate S, Kumar Behera A, Limbadri C, Majumder H (2023) Wire electrical discharge machining (WEDM) review on current optimization research trends. Mater Today: Proc. published online, 2023. https://doi.org/10.1016/j.matpr.2023.06.113.10.1016/j.matpr.2023.06.113 ↗
16. Farooq MU, Anwar S (2023) Investigations on the surface integrity of Ti6Al4V under modified dielectric(s)-based electric discharge machining using cryogenically treated electrodes. Processes 11:877. https://doi.org/10.3390/pr1103087710.3390/pr11030877 ↗
17. Singh DP, Mishra S, Porwal RK (2023) Parametric analysis through ANFIS modelling and optimization of micro-hole machining in super duplex stainless steel by die-sinking EDM. Adv Mater Process Technol 9(4):1885–1902. https://doi.org/10.1080/2374068x.2022.213573310.1080/2374068x.2022.2135733 ↗
18. Subha V, Jagan Raj S, Vijay Anand R, Sathya S, Jothikumar R, Anusuya M (2023) Electrical discharge machining of titanium alloy using diatomite powder-mixed dielectric fluid based on response surface methodology. Mater Today: Proc. published online, 2023. https://doi.org/10.1016/j.matpr.2023.06.256.10.1016/j.matpr.2023.06.256 ↗
19. Gugulothu B, Bharadwaja K, Vijayakumar S, Rao TVJ, Sri MNS, Anusha P, Agrawal MK (2023) Modeling and parametric optimization of electrical discharge machining on casted composite using central composite design. Int J Interact Des Manuf. https://doi.org/10.1007/s12008-023-01323-710.1007/s12008-023-01323-7 ↗
20. Zain ZM, Rashid MM, Khan SA, Khan AA (2023) Analysis and modeling of surface roughness in powder mix EDM and pure EDM using central composite design. Adv Res Appl Sci Eng Technol 30:243. https://doi.org/10.37934/araset.30.1.24325410.37934/araset.30.1.243254 ↗
21. Arab J, Dixit P (2022) Formation of macro-sized through-holes in glass using notch-shaped tubular electrodes in electrochemical discharge machining. J Manuf Processes 78:92–106. https://doi.org/10.1016/j.jmapro.2022.03.05210.1016/j.jmapro.2022.03.052 ↗
22. Alam MN, Siddiquee AN, Khan ZA, Khan NZ (2022) A comprehensive review on wire EDM performance evaluation. Proc Inst Mech Eng Part E 236(4):1724–1746. https://doi.org/10.1177/0954408922107484310.1177/09544089221074843 ↗
23. Darji RS, Joshi GR, Hembrom S, Kumar M, Shinde SM, Ramesh R (2022) Powder mixed electrical discharge machining of inconel 718: investigation on material removal rate and surface roughness. Int J Inter Des Manuf (IJIDeM. https://doi.org/10.1007/s12008-022-01059-w10.1007/s12008-022-01059-w ↗
24. Arunnath A, Madhu S, Tufa M (2022) Experimental investigation and optimization of material removal rate and tool wear in the machining of aluminum-boron carbide (Al-B4C) nanocomposite using EDM process. Adv Mater Sci Eng 2022(1). https://doi.org/10.1155/2022/425402410.1155/2022/4254024 ↗
25. Hurairah MA, Sana M, Farooq MU et al (2024) Genetic algorithm-based optimization of artificial neural network of process parameters and characterization of machining errors in graphene mixed dielectric. Arab J Sci Eng 49:15649–15666. https://doi.org/10.1007/s13369-024-09029-y10.1007/s13369-024-09029-y ↗
26. Hassan S, Asad M, Sana M et al (2024) Parametric analysis and multi-objective optimization for machining complex features on D2 and DC53 steels for tooling applications. J Mater Eng Perform 33:12109–12123. https://doi.org/10.1007/s11665-024-09828-210.1007/s11665-024-09828-2 ↗
27. Farooq MU, Ali MA, Anwar S (2024) Process parameters optimization and performance analysis of micro-complex geometry machining on Ti6Al4V. Int J Interact Des Manuf 18:4573–4593. https://doi.org/10.1007/s12008-023-01711-z10.1007/s12008-023-01711-z ↗
28. Farooq MU, Anwar S, Ali MA et al (2023) Exploring wide-parametric range for tool electrode selection based on surface characterization and machining rate employing powder-mixed electric discharge machining process for Ti6Al4V ELI. Int J Adv Manuf Technol 129:2823–2841. https://doi.org/10.1007/s00170-023-12469-910.1007/s00170-023-12469-9 ↗
29. Davim JP (2012) Statistical and computational techniques in manufacturing. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-25859-610.1007/978-3-642-25859-6 ↗
30. Davim J (2023) Nonconventional Machining. De Gruyter, Berlin, Boston. https://doi.org/10.1515/978311058447910.1515/9783110584479 ↗
31. Davim JP (2016) Modern mechanical engineering. Springer, Springer Berlin, Heidelberg. https://link.springer.com/book/https://doi.org/10.1007/978-3-642-45176-810.1007/978-3-642-45176-8 ↗
32. Davim JP (2016) Surface integrity in machining. Springer. https://link.springer.com/book/https://doi.org/10.1007/978-1-84882-874-210.1007/978-1-84882-874-2 ↗
33. Dhakar K, Kumar RS, Katheria A, Nagdeve L, Kumar H (2022) Effect of various dielectric fluids on electric discharge machining (EDM): a review. J Braz Soc Mech Sci Eng 44:487. https://doi.org/10.1007/s40430-022-03778-310.1007/s40430-022-03778-3 ↗
34. Surani K, Patel S, Panchal H, Gupta N, Shinde T, Sharma Y (2023) Mathematical modeling for radial overcut on powder mixed micro-electrical discharge machining (µ-EDM) of TZM-molybdenum superalloy by response surface methodology. International Journal on Interactive Design and Manufacturing (IJIDeM). https://doi.org/10.1007/s12008-023-01443-010.1007/s12008-023-01443-0 ↗
35. Selvarajan L, Venkataramanan K (2023) Si3N4-TiN conductive ceramic composites: topography on EDMed surfaces and precise drilled holes. Mater Sci Technol 39(15):2006–2017. https://doi.org/10.1080/02670836.2023.218715610.1080/02670836.2023.2187156 ↗
36. Murugan C, Kumar RMS, Alagarsamy SV (2022) Investigations on electric discharge machining behaviour of Si3N4 -TiN ceramic composite. Silicon 14:547–555. https://doi.org/10.1007/s12633-020-00848-w10.1007/s12633-020-00848-w ↗