Modified texture and room temperature formability of magnesium alloy sheet by Li addition
Source abstract
Abstract
The effect of Li addition on the mechanical responses of magnesium alloy sheets was examined in correlation with the concurrent microstructure and texture evolution. The basal texture was drastically weakened and the basal pole rotated to the transverse direction (TD) owing to the Li addition. The Mg alloy sheet containing lithium element exhibited larger uniform elongation and its Erichsen value (IE) increased by ~ 59 %. Enhanced the ambient formability of the extruded Mg alloy sheet fabricated by Li addition was accomplished by the tilted weak basal texture. The microstructure evolution and properties were characterized and compared.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Luo AA (2013) Magnesium casting technology for structural applications. J Magnes Alloys 1:2–2210.1016/j.jma.2013.02.002 ↗
2. Vedani M, Ge Q, Wu W, Petrini L (2014) Texture effects on design of Mg biodegradable stents. Int J Mater Form 7:31–3810.1007/s12289-012-1108-5 ↗
3. Liu W, Wu G, Zhai C, Ding W, Korsunsky AM (2013) Grain refinement and fatigue strengthening mechanisms in as-extruded Mg–6Zn–0.5Zr and Mg–10Gd–3Y–0.5Zr magnesium alloys by shot peening. Int J Plast 49:16–3510.1016/j.ijplas.2013.02.015 ↗
4. Yi SB, Davies CHJ, Brokmeier HG, Bolmaro RE, Kainer KU, Homeyer J (2006) Deformation and texture evolution in AZ31 magnesium alloy during uniaxial loading. Acta Mater 54:549–56210.1016/j.actamat.2005.09.024 ↗
5. Sorgente D, Scintilla LD, Palumbo G, Tricarico L (2009) Blow forming of AZ31 magnesium alloy at elevated temperatures. Int J Mater Form 3:13–1910.1007/s12289-009-0411-2 ↗
6. Piao K, Lee JK, Kim JH, Kim HY, Chung K, Barlat F, Wagoner RH (2012) A sheet tension/compression test for elevated temperature. Int J Plast 38:27–4610.1016/j.ijplas.2012.03.009 ↗
7. Doiphode RL, Narayana Murty SVS, Prabhu N, Kashyap BP (2013) Effects of caliber rolling on microstructure and room temperature tensile properties of Mg–3Al–1Zn alloy. J Magnes Alloys 1:169–17510.1016/j.jma.2013.07.005 ↗
8. Zhang H, Jin W, Fan J, Cheng W, Jørgen Roven H, Xu B, Dong H (2014) Grain refining and improving mechanical properties of a warm rolled AZ31 alloy plate. Mater Lett 135:31–3410.1016/j.matlet.2014.07.130 ↗
9. Song B, Guo N, Liu T, Yang Q (2014) Improvement of formability and mechanical properties of magnesium alloys via pre-twinning: a review. Mater Des 62:352–36010.1016/j.matdes.2014.05.034 ↗
10. Meyer LW, Hockauf M, Zillmann B, Schneider I (2009) Strength, ductility and impact toughness of the magnesium alloy az31b after equal-channel angular pressing. Int J Mater Form 2:61–6410.1007/s12289-009-0545-2 ↗
11. Song B, Huang G, Li H, Zhang L, Huang G, Pan F (2010) Texture evolution and mechanical properties of AZ31B magnesium alloy sheets processed by repeated unidirectional bending. J Alloys Compd 489:475–48110.1016/j.jallcom.2009.09.090 ↗
12. Zhang L, Huang G, Zhang H, Song B (2011) Cold stamping formability of AZ31B magnesium alloy sheet undergoing repeated unidirectional bending process. J Mater Process Technol 211:644–64910.1016/j.jmatprotec.2010.11.019 ↗
13. Razavi SM, Foley DC, Karaman I, Hartwig KT, Duygulu O, Kecskes LJ, Mathaudhu SN, Hammond VH (2012) Effect of grain size on prismatic slip in Mg–3Al–1Zn alloy. Scr Mater 67:439–44210.1016/j.scriptamat.2012.05.017 ↗
14. Pilehva F, Zarei-Hanzaki A, Fatemi-Varzaneh SM (2012) The influence of initial microstructure and temperature on the deformation behavior of AZ91 magnesium alloy. Mater Des 42:411–41710.1016/j.matdes.2012.06.012 ↗
15. Arab SM, Akbarzadeh A (2013) The effect of equal channel angular pressing process on the microstructure of AZ31 Mg alloy strip shaped specimens. J Magnes Alloys 1:145–14910.1016/j.jma.2013.07.001 ↗
16. Dong H, Pan F, Jiang B, Zeng Y (2014) Evolution of microstructure and mechanical properties of a duplex Mg–Li alloy under extrusion with an increasing ratio. Mater Des 57:121–12710.1016/j.matdes.2013.12.055 ↗
17. Zhu T, Cui C, Zhang T, Wu R, Betsofen S, Leng Z, Zhang J, Zhang M (2014) Influence of the combined addition of Y and Nd on the microstructure and mechanical properties of Mg-Li alloy. Mater Des 57:245–24910.1016/j.matdes.2013.12.057 ↗
18. Wu RZ, Deng YS, Zhang ML (2009) Microstructure and mechanical properties of Mg–5Li–3Al–2Zn–xRE alloys. J Mater Sci 44:4132–413910.1007/s10853-009-3605-6 ↗
19. Dong H, Pan F, Jiang B, Dai J, Yang Q (2013) Anisotropy of the extruded and heat-treated Li containing AZ31 magnesium alloys. J Alloys Compd 590:233–24010.1016/j.jallcom.2013.12.069 ↗
20. Drozd Z, Trojanová Z, Kúdela S (2004) Deformation behaviour of Mg–Li–Al alloys. J Alloys Compd 378:192–19510.1016/j.jallcom.2004.01.040 ↗
21. Li R, Pan F, Jiang B, Dong H, Yang Q (2013) Effect of Li addition on the mechanical behavior and texture of the as-extruded AZ31 magnesium alloy. Mater Sci Eng A 562:33–3810.1016/j.msea.2012.11.032 ↗
22. Cao F, Ding H, Hou H, Yu C, Li Y (2014) A novel superplastic mechanism-based constitutive equation and its application in an ultralight two-phase hypereutectic Mg-8.42Li alloy. Mater Sci Eng A 596:250–25410.1016/j.msea.2013.12.020 ↗
23. Li R, Pan F, Jiang B, Yang Q, Tang A (2013) Effects of combined additions of Li and Al–5Ti–1B on the mechanical anisotropy of AZ31 magnesium alloy. Mater Des 46:922–92710.1016/j.matdes.2012.11.032 ↗
24. Yang QS, Jiang B, Zhou GY, Dai JH, Pan FS (2014) Influence of an asymmetric shear deformation on microstructure evolution and mechanical behavior of AZ31 magnesium alloy sheet. Mater Sci Eng A 590:440–44710.1016/j.msea.2013.10.045 ↗
25. Guo C, Jiang F, Wu R, Zhang M (2013) Effect of strain rate on compressive mechanical properties of extruded Mg–8Li–1Al–1Ce alloy. Mater Des 49:110–11510.1016/j.matdes.2013.01.049 ↗
26. del Valle JA, Carreño F, Ruano OA (2006) Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling. Acta Mater 54:4247–425910.1016/j.actamat.2006.05.018 ↗
27. Yang QS, Jiang B, Dai JH, Li RH, Pan FS (2013) Mechanical properties and anisotropy of AZ31 alloy sheet processed by flat extrusion container. J Mater Res 28:1148–115410.1557/jmr.2013.51 ↗
28. Huang X, Suzuki K, Chino Y (2011) Annealing behaviour of Mg–3Al–1Zn alloy sheet obtained by a combination of high-temperature rolling and subsequent warm rolling. J Alloys Compd 509:4854–486010.1016/j.jallcom.2011.01.189 ↗
29. Huang X, Suzuki K, Chino Y, Mabuchi M (2012) Influence of initial texture on rolling and annealing textures of Mg–3Al–1Zn alloy sheets processed by high temperature rolling. J Alloys Compd 537:80–8610.1016/j.jallcom.2012.05.002 ↗
30. Nebebe M, Bohlen J, Steglich D, Letzig D (2009) Mechanical characterisation of Mg alloys and model parameter identification for sheet forming simulations. Int J Mater Form 2:53–5610.1007/s12289-009-0437-5 ↗
31. Stanford N, Geng J, Chun YB, Davies CHJ, Nie JF, Barnett MR (2012) Effect of plate-shaped particle distributions on the deformation behaviour of magnesium alloy AZ91 in tension and compression. Acta Mater 60:218–22810.1016/j.actamat.2011.10.001 ↗
32. Seipp S, Wagner MFX, Hockauf K, Schneider I, Meyer LW, Hockauf M (2012) Microstructure, crystallographic texture and mechanical properties of the magnesium alloy AZ31B after different routes of thermo-mechanical processing. Int J Plast 35:155–16610.1016/j.ijplas.2012.03.007 ↗
33. Agnew S, Horton J, Yoo M (2002) Transmission electron microscopy investigation of < c + a > dislocations in Mg and α-solid solution Mg-Li alloys. Metall Mater Trans A 33:851–85810.1007/s11661-002-0154-x ↗
34. Kim D-G, Lee K-M, Lee J-S, Yoon Y-O, Son H-T (2012) Evolution of microstructures and textures in magnesium AZ31 alloys deformed by normal and cross-roll rolling. Mater Lett 75:122–12510.1016/j.matlet.2012.01.141 ↗