Prediction of process-induced void formation in anisotropic Fiber-reinforced autoclave composite parts
Source abstract
Abstract
A numerical methodology is proposed to predict void content and evolution during autoclave processing of thermoset prepregs. Starting with the initial prepreg void content, the void evolution model implements mechanisms for void compaction under the effect of the applied pressure, including Ideal Gas law compaction, and squeeze flow for single curvature geometries. Pressure variability in the prepreg stack due to interactions between applied autoclave pressure and anisotropic material response are considered and implemented. A parametric study is conducted to investigate the role of material anisotropy, initial void content, and applied autoclave pressure on void evolution during consolidation of prepregs on a tool with single curvatures. The ability of the model to predict pressure gradient through the thickness of the laminate and its impact on void evolution is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Injection Molding Process and Properties · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Chandrakala K, Vanaja A, Rao R (2009) Storage life studies on RT cure glass—epoxy prepregs. J Reinf Plast Compos 28(16):1987–199710.1177/0731684408090715 ↗
2. Herrmann A, Zahlen P, Zuardy I (2005) Sandwich structures technology in commercial aviation. In: Thomsen OT, Bozhevolnaya E, Lyckegaard A (eds) Sandwich structures 7: advancing with sandwich structures and materials. Springer Netherlands, pp 13–2610.1007/1-4020-3848-8_2 ↗
3. Kardos J. L., Duduković M. P., Dave R. (2005) Void growth and resin transport during processing of thermosetting — Matrix composites. Epoxy resins and composites IV. Advances in polymer science, vol 80. Springer
4. Lightfoot SC, Wisnom MR, Potter K (2013) A new mechanism for the formation of ply wrinkles due to sheer between plies. Composites Part A 49:139–14710.1016/j.compositesa.2013.03.002 ↗
5. Potter K, Khan B, Wisnom MR, Bell T, Stevens J (2008) Variability, fiber waviness and misalignment in the determination of the properties of composite materials and structures. Composites Part A 39(9):1343–135410.1016/j.compositesa.2008.04.016 ↗
6. Bloom LD, Wang J, Potter KD (2013) Damage progression and defect sensitivity: an experimental study of representative wrinkles in tension. Composites Part B 45(1):449–45810.1016/j.compositesb.2012.05.021 ↗
7. Hsiao HM, Daniel IM (1996) Effect of fiber waviness on stiffness and strength reduction of unidirectional composites under compressive loading. Compos Sci Technol 56(5):581–59310.1016/0266-3538(96)00045-0 ↗
8. Garnich MR, Karami G (2004) Finite element for stiffness and strength of wavy fiber composites. J Compos Mater 38(4):273–29210.1177/0021998304039270 ↗
9. Karami G, Garnich MR (2005) Effective moduli and failure consideration for composites with periodic fiber waviness. Compos Struct 67(4):461–47510.1016/j.compstruct.2004.02.005 ↗
10. Hubert P, Poursartip A (1998) A review of flow and compaction modelling relevant to thermoset matrix laminate processing. J Reinf Plast Compos 17(4):286–31810.1177/073168449801700402 ↗
11. Fernlund G, Griffith J, Courdji R, Poursartip A (2002) Experimental and numerical study of the effect of caul-sheets on corner thinning of composite laminates. Composites Part A 33(3):411–42610.1016/S1359-835X(01)00114-2 ↗
12. Naji MI, Hoa SV (2000) Curing of thick angle-bend thermoset composite part: curing process modification for uniform thickness and uniform fiber volume fraction distribution. J Compos Mater 34(20):1710–175510.1106/F97F-U8RD-QYN8-Q8JU ↗
13. Li Y, Li M, Gu Y, Zhang Z (2009) Numerical and experimental study on the effect of lay-up type and structural elements on thickness uniformity of L-shaped laminates. Appl Compos Mater 16(2):101–11510.1007/s10443-009-9080-z ↗
14. Wang X, Zhang Z, Xie F, Li M, Dai D, Wang F (2009) Correlated rules between complex structure of composite components and manufacturing defects in autoclave molding technology. J Reinf Plast Compos 28(22):2791–280310.1177/0731684408093876 ↗
15. Li M (2001) Optimal curing of thermoset composites: thermochemical and consolidation considerations. PhD thesis, University of Illinois at Urbana-Champaign
16. Mélanie B (2010) Out-of-autoclave manufacturing of complex shape composite laminates. McGill University, Montreal, Manufacturing
17. Xin CB, Gu YZ, Li M, Luo J, Li YX, Zhang ZG (2011) Experimental and numerical study on the effect of rubber mold configuration on the compaction of composite angle laminates during autoclave processing. Composites Part A 42(10):1353–136010.1016/j.compositesa.2011.05.018 ↗
18. Johnston A (1997) An integrated model of the development of process-induced deformation in autoclave processing of composite structures. Ph.D. thesis, The University of British Columbia
19. Hubert P, Vaziri R, Poursartip A (1999) A two-dimensional flow model for the process simulation of complex shape composite laminates. Int J Numer Meth Eng 44(1):1–26 8610.1002/(SICI)1097-0207(19990110)44:1<1::AID-NME481>3.0.CO;2-K ↗
20. Min L, Yanxia L, Yizhuo G (2008) Numerical simulation flow and compaction during the consolidation of laminated composites. Wiley Intersci Soc Plast Eng 29(5):560–568 87
21. Dave R, Kardos JL, Dudukovic MP (1987) A model for resin flow during composite processing: part 1-general mathematical development. Polym Compos 8(1):29–38 8810.1002/pc.750080106 ↗
22. Gutowski TG, Cai Z, Bauer S, Boucher D (1987) Consolidation experiments for laminate composites. J Compos Mater 21(7):650–669 8910.1177/002199838702100705 ↗
23. Li M, Li Y, Zhang Z, Gu Y (2008) Numerical simulation flow and compaction during the consolidation of laminated composites. Polym Compos 29(5):560–568 9010.1002/pc.20444 ↗
24. Li M, Charles L, Tucker III (2002) Modelling and simulation of two-dimensional consolidation for thermoset matrix composites. Compos A 33(6):877–892 9110.1016/S1359-835X(02)00017-9 ↗
25. Dong C (2011) Model development for the formation of resin-rich zones in composites processing. Compos A 42(4):419–42410.1016/j.compositesa.2010.12.017 ↗
26. Simacek P, Advani SG, Gruber M, Jensen B (2013) A non-local void filling model to describe its dynamics during processing thermoplastic composites. Composites Part A 46(1):154–16510.1016/j.compositesa.2012.10.015 ↗