Investigation of texture transformation paths in copper tube during floating plug drawing process
Source abstract
Abstract
The texture evolution of copper tube manufactured by floating plug drawing process was investigated by Electron Backscatter Diffraction techniques and Visco-Plastic Self-consistent (VPSC) modelling method. The results obtained from experimentation indicate that the initial textures of copper tube transformed sharply after the first pass of the drawing process, and the final textures in the tube consist of Goss {110} and P {110} components. The VPSC model was established in order to study the texture transformation and the activity of slip systems of the tube during the drawing process. Two types of transformation paths were proposed to explain the mechanism of the texture evolution, which has a good agreement with the VPSC simulation results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Toth LS, Lapovok R, Molotnikov A et al (2010) Texture evolution during micro-drawing of ultrafine grained copper. Mater Sci Eng A 527:4633–464010.1016/j.msea.2010.04.011 ↗
2. Vincent K, Kiat JM, Janolin PE et al (2017) Crystallographic textures. European Physical Journal Conferences 155:0000510.1051/epjconf/201715500005 ↗
3. Chen LW, Han B, Shi QN et al (2010) Unformity of texture microstructure of pure copper sheets with severe plastic deformation. Mater Sci Technol 18(3):391–394
4. Konkova T, Valeev IS, Mironov S et al (2016) Microstructure response of cryogenically-rolled cu-30Sn brass to electric-current pulsing. J Alloys Compd 659:184–19210.1016/j.jallcom.2015.11.059 ↗
5. Li R, G, Zhang SJ, Kang HJ (2017) Microstructure and texture evolution in the cryorolled CuZr alloy. J Alloys Compd 693:592–60010.1016/j.jallcom.2016.09.209 ↗
6. Hirsch J, Lucke K (1988) Mechanism of deformation and development of rolling texture in polycrystalline FCC metals. Acta Metall 36:2863–292710.1016/0001-6160(88)90172-1 ↗
7. Zhao ZL, Li Z, Xiao Z (2017) Structure evolution of cu-3.6%Al2O3 alloy fine wire during cold drawing. Chin J Nonferrous Met 27(3):486–493
8. Pardis N, Chen C, Brahimi RE et al (2015) Microstructure, texture and mechanical properties of cyclic expansion–extrusion deformed pure copper. Mater Sci Eng A 628:423–43210.1016/j.msea.2015.01.003 ↗
9. Hörnqvist M, Mortazavi N, Halvarsson M et al (2015) Deformation and texture evolution of OFHC copper during dynamic tensile extrusion. Acta Mater 89:163–18010.1016/j.actamat.2015.01.053 ↗
10. Zhang SH, Liu JS, Cheng M (2016) Cast and roll technology of precision copper tubes. National Defend Industry Press, Beijing
11. Um KK, Lee DN (1997) An upper bound solution of tube drawing. J Mater Process Technol 63(1–3):43–4810.1016/S0924-0136(96)02597-6 ↗
12. Sawamiphakdi K, Lahoti GD, Kropp PK (1991) Simulation of a tube drawing process by the finite element method. J Mater Process Technol 27:179–19010.1016/0924-0136(91)90052-G ↗
13. Techn J D, Benny E (2009) LS-DYNA used to analyze the drawing of precision tubes. 7th European LS-DYNA conference
14. Świątkowski K, Hatalak R (2004) Study of the new floating-plug drawing process of thin-walled tubes. J Mater Process Technol 151(1–3):105–11410.1016/j.jmatprotec.2004.04.024 ↗
15. Karnezis P, Farrugia DCJ (1998) Study of cold tube drawing by finite-element modelling. J Mater Process Technol 80:690–69410.1016/S0924-0136(98)00127-7 ↗
16. Mineur M, Villechaise P, Mendez J (2000) Influence of the crystalline texture on the fatigue behavior of a 316L austenitic stainless steel. Mater Sci Eng A 286(2):257–26810.1016/S0921-5093(00)00804-2 ↗
17. Shi Y, Jin H, Wu PD et al (2017) Analysis of roping in an AA6111 T4P automotive sheet in 3D deformation states. Acta Mater 124:598–60710.1016/j.actamat.2016.11.028 ↗
18. Gregory JK, Brokmeier HG (1995) The relationship between crystallographic texture and salt water cracking susceptibility in Ti-6Al-4V. Mater Sci Eng A 203(1–2):365–37210.1016/0921-5093(95)09820-8 ↗
19. Foadian F, Carradó A, Brokmeier HG et al (2019) Evolution of texture in precision seamless tubes investigated by synchrotron and neutron radiation measurement. Mater Charact 151:582–58910.1016/j.matchar.2019.03.041 ↗
20. Tomé RA, Lebensohn CN (1993) A selfconsistent approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys. Acta Metall Mater 41:2611–262410.1016/0956-7151(93)90130-K ↗
21. Kyu Hwan O (1998) Analysis of texture evolution in FCC metals by full constraint and a self-consistent viscoplastic model. Met Mater Int 4(6):1127–113110.1007/BF03025986 ↗
22. Kyu Hwan O (1999) Analysis of texture evolution of cubic metals by isotropic and anisotropic viscoplastic self-consistent models. Met Mater Int 5(1):17–2310.1007/BF03025999 ↗
23. Molinari A, Canova G, Ahzi S (1987) A self-consistent approach of the large deformation polycrystal viscoplasticity. Acta Metall 35:2983–299410.1016/0001-6160(87)90297-5 ↗
24. Lebensohn R, Tomé C (1993) A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys. Acta Metall Mater 41:2611–262410.1016/0956-7151(93)90130-K ↗
25. Eshelby JD (1957) The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc Royal Soc Lond A 241:376–39610.1098/rspa.1957.0133 ↗
26. Asaro RJ, Needleman A (1985) Texture development and strain hardening in rate dependent polycrystals. Acta Metall Mater 33:923–95310.1016/0001-6160(85)90188-9 ↗
27. Lebensohn R A, Turner P A, Signorelli J W et al (1998) Calculation of intergranular stresses based on a large strain visco-plastic self-consistent model. Model Simul Mater Sci Eng 6:447–465.10.1088/0965-0393/6/4/011 ↗
28. Lebensohn R A, Tomé C N, Ponte C P (2007) Self-consistent modeling of the mechanical behavior of visco-plastic polycrystals incorporating intragranular field fluctuations. Phil Mag 87:4287–4322.10.1080/14786430701432619 ↗
29. Wang H, Raeisinia B, Wu PD et al (2010) Evaluation of self-consistent polycrystal plasticity models for magnesium alloy AZ31B sheet. Int Solids Struct 47:2905–291710.1016/j.ijsolstr.2010.06.016 ↗
30. Hutchinson JW (1976) Bounds and self-consistent estimates for creep of polycrystalline materials. Proc R Soc London A 348:101–12110.1098/rspa.1976.0027 ↗
31. Masson R, Bornert M, Suquet P et al (2000) An affine formulation for the prediction of the effective properties of nonlinear composites and polycrystals. J Mech Phys Solids 48:1203–122710.1016/S0022-5096(99)00071-X ↗
32. Lebensohn R A, Tomé C N, Maudlin P J (2003) An extended self-consistent visco-plastic formulation: application to polycrystals with voids. Int Report of Los Alamos Natl Lab LA-UR-03-199310.2172/821538 ↗
33. Lebensohn RA, Tomé CN, Maudlin PJ (2004) A self-consistent formulation for the prediction of the anisotropic behavior of visco-plastic polycrystals with voids. J Mech Phys Solids 52:249–27810.1016/S0022-5096(03)00114-5 ↗
34. Molinari A, Tóth LS (1994) Tuning a self-consistent visco-plastic model by finite element results. Part I: modeling. Acta Metall Mater 42:2453–245810.1016/0956-7151(94)90324-7 ↗
35. Tomé CN (1999) Self-consistent polycrystal models: a directional compliance criterion to describe grain interactions. Model Simul Mater Sci Eng 7:723–73810.1088/0965-0393/7/5/305 ↗
36. Li B, Zhang SH, Zhang GL et al (2007) Microstructure simulation of copper tube and its application in three roll planetary rolling. Mater Sci Technol 23(6):715–72210.1179/174328407X185848 ↗
37. Li B, Zhang SH, Zhang HQ et al (2007) Microstructure and properties of copper tube during three-roll planetary rolling. J Mater Eng Perform 17(4):499–50510.1007/s11665-007-9166-4 ↗
38. Roohollah J (2017) Unexpected cube texture in cold rolling of copper. Mater Lett 202:111–11510.1016/j.matlet.2017.05.054 ↗
39. Lapeire L, Sidor J, Verleysen P et al (2015) Texture comparison between room temperature rolled and cryogenically rolled pure copper. Acta Materialia 95:224–23510.1016/j.actamat.2015.05.035 ↗
40. Tome C, Canova G R, Kocks U F et al (1984) The relation between macroscopic and microscopic strain hardening in FCC polycrystals. Acta metal 32(10):1637–165310.1016/0001-6160(84)90222-0 ↗
41. Valiev R Z, Alexandrov I V, Zhu Y T, Lowe T C (2002) Paradox of strength and ductility in metals processed by severe plastic deformation. J Mater Res 17(1):5–810.1557/JMR.2002.0002 ↗