An experimental and numerical investigation of the effect of macro-textured tool surfaces in hot stamping
Source abstract
Abstract
This paper presents a method of increasing draw-ability of materials in hot stamping processes using forming tools with macro-scale textures on the tool surfaces. Firstly, a series of tool texture designs and orientations were presented and a test programme was designed for the experimental investigation. Top-hat shape drawing experiments in cold and hot stamping conditions were conducted to evaluate the effect of macro-scale tool surface textures on the material drawing. Texture directional and texture feature effects of the blankholders on the draw-ability of the material have been investigated. A finite element model of the top-hat drawing process with textured tool surfaces has been established and validated from experimental data. Further FE process modelling has been carried out and the effects of texture features and forming speed have been studied. The relationships between texture designs and material drawing results have been analysed. The developed FE model can provide a guide to design the geometry of tool textures and optimise the hot stamping process parameters.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Wang L, Strangewood M, Balint D, Lin J, Dean TA (2011) Formability and failure mechanisms of AA2024 under hot forming conditions. Mater Sci Eng A 528(6):2648–2656. doi: 10.1016/j.msea.2010.11.08410.1016/j.msea.2010.11.084 ↗
2. Bhattacharya R, Stanton M, Dargue I, Williams G, Aylmore R (2010) Forming limit studies on different thickness aluminium 6xxx series alloys used in automotive applications. Int J Mater Form 3(1):267–270. doi: 10.1007/s12289-010-0758-410.1007/s12289-010-0758-4 ↗
3. Foster AD, Dean TA, Lin J (2013) Process for forming aluminium alloy sheet components, Patent No. EP 2,324,137, January 16
4. Mohamed MS, Foster AD, Lin J, Balint DS, Dean TA (2012) Investigation of deformation and failure features in hot stamping of AA6082: experimentation and modelling. Int J Mach Tool Manuf 53(1):27–38. doi: 10.1016/j.ijmachtools.2011.07.00510.1016/j.ijmachtools.2011.07.005 ↗
5. Lloyd DJ (1998) Advances in industrial materials. In: Wilkinson DS, Poole WJ, Alpas A (eds) The metallurgical society of CIM. Montreal, Canada, 3–17
6. Karbasian H, Tekkaya AE (2010) A review on hot stamping. J Mater Process Technol 210(15):2103–2118. doi: 10.1016/j.jmatprotec.2010.07.01910.1016/j.jmatprotec.2010.07.019 ↗
7. Merklein M, Lechler J, Stoehr T (2009) Investigations on the thermal behavior of ultra high strength boron manganese steels within hot stamping. Int J Mater Form 2(1):259–262. doi: 10.1007/s12289-009-0505-x10.1007/s12289-009-0505-x ↗
8. Bosetti P, Bruschi S, Stoehr T, Lechler J, Merklein M (2010) Interlaboratory comparison for heat transfer coefficient identification in hot stamping of high strength steels. Int J Mater Form 3(1):817–820. doi: 10.1007/s12289-010-0895-910.1007/s12289-010-0895-9 ↗
9. Ceretti E, Fiorentino A, Giardini C (2008) Process parameters influence on friction coefficient in sheet forming operations. Int J Mater Form 1(1):1219–1222. doi: 10.1007/s12289-008-0161-610.1007/s12289-008-0161-6 ↗
10. Bariani PF, Bruschi S, Ghiotti A, Michieletto F (2013) Hot stamping of AA5083 aluminium alloy sheets. CIRP Ann Manuf Technol 62(1):251–254. doi: 10.1016/j.cirp.2013.03.05010.1016/j.cirp.2013.03.050 ↗
11. Kim H, Sung JH, Sivakumar R, Altan T (2007) Evaluation of stamping lubricants using the deep drawing test. Int J Mach Tool Manuf 47(14):2120–2132. doi: 10.1016/j.ijmachtools.2007.04.01410.1016/j.ijmachtools.2007.04.014 ↗
12. Vanhulsel A, Velasco F, Jacobs R, Eersels L, Havermans D, Roberts EW, Sherrington I, Anderson MJ, Gaillard J (2007) DLC solid lubricant coatings on ball bearings for space applications. Tribol Int 40(7):1186–1194. doi: 10.1016/j.triboint.2006.12.00510.1016/j.triboint.2006.12.005 ↗
13. Riahi A, Alpas A (2007) Adhesion of AA5182 aluminium sheet to DLC and TiN coatings at 25 °C abd 420 °C. Surf Coat Technol 202:1055–1061. doi: 10.1016/j.surfcoat.2007.07.08510.1016/j.surfcoat.2007.07.085 ↗
14. Ni W, Cheng Y, Weiner A, Perry T (2006) Tribological behavior of diamond-like-carbon (DLC) coatings against aluminum alloys at elecated temperatures. Surf Coat Technol 201(6):3229–3234. doi: 10.1016/j.surfcoat.2006.06.04510.1016/j.surfcoat.2006.06.045 ↗
15. Menezes PL, Kishore, Kailas SV (2009) Influence of surface texture and roughness parameters on friction and transfer layer formation during sliding of aluminium pin on steel plate. Wear 267(9–10):1534–1549. doi: 10.1016/j.wear.2009.06.00310.1016/j.wear.2009.06.003 ↗
16. Hu T, Hu L, Ding Q (2012) Effective solution for the tribological problems of Ti-6Al-4 V: combination of laser surface texturing and solid lubricant film. Surf Coat Technol 206(24):5060–5066. doi: 10.1016/j.surfcoat.2012.06.01410.1016/j.surfcoat.2012.06.014 ↗
17. Wank A, Reisel G, Wielage B (2006) Behavior of DLC coatings in lubricant free cold massive forming of aluminum. Surf Coat Technol 201(3–4):822–827. doi: 10.1016/j.surfcoat.2005.12.04310.1016/j.surfcoat.2005.12.043 ↗
18. Heinrichs J, Olsson M, Jacobson S (2012) Mechanisms of material transfer studied in situ in the SEM: explanations to the success of DLC coated tools in aluminium forming. Wear 292–293:49–60. doi: 10.1016/j.wear.2012.05.03310.1016/j.wear.2012.05.033 ↗
19. Heinrichs J, Jacobson S (2010) Laboratory test simulation of aluminium cold forming–influence from PVD tool coatings on the tendency to galling. Surf Coat Technol 204(21–22):3606–3613. doi: 10.1016/j.surfcoat.2010.04.02510.1016/j.surfcoat.2010.04.025 ↗
20. Segu DZ, Choi SG, Choi JH, Kim SS (2013) The effect of multi-scale laser textured surface on lubrication regime. Appl Surf Sci 270:58–63. doi: 10.1016/j.apsusc.2012.12.06810.1016/j.apsusc.2012.12.068 ↗
21. Costa HL, Hutchings IM (2009) Effects of die surface patterning on lubrication in strip drawing. J Mater Process Technol 209(3):1175–1180. doi: 10.1016/j.jmatprotec.2008.03.02610.1016/j.jmatprotec.2008.03.026 ↗
22. Costa HL, Hutchings IM (2007) Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions. Tribol Int 40(8):1227–1238. doi: 10.1016/j.triboint.2007.01.01410.1016/j.triboint.2007.01.014 ↗
23. Qiu M, Minson BR, Raeymaekers B (2013) The effect of texture shape on the friction coefficient and stiffness of gas-lubricated parallel slider bearings. Tribol Int 67:278–288. doi: 10.1016/j.triboint.2013.08.00410.1016/j.triboint.2013.08.004 ↗
24. Kovalchenko A, Ajayi O, Erdemir A, Fenske G (2011) Friction and wear behavior of laser textured surface under lubricated initial point contact. Wear 271(9–10):1719–1725. doi: 10.1016/j.wear.2010.12.04910.1016/j.wear.2010.12.049 ↗
25. Rasp W, Wichern CM (2002) Effects of surface-topography directly and lubrication condition on frictional behaviour during plastic deformation. J Mater Process Technol 125–126:379–386. doi: 10.1016/S0924-0136(02)00346-110.1016/S0924-0136(02)00346-1 ↗
26. Lakshmipathy R, Sagar R (1992) Effect of die surface topography on die-work interfacial friction in open die forging. Int J Mach Tool Manuf 2(5):685–693. doi: 10.1016/0890-6955(92)90023-A10.1016/0890-6955(92)90023-A ↗
27. Xie JL, Tan YB, Duan F, Ranjith K, Wong TN, Toh KC, Choo KF, Chan PK (2013) Study of heat transfer enhancement for structured surfaces in spray cooling. App Therm Eng 59(1–2):464–472. doi: 10.1016/j.applthermaleng.2013.05.04710.1016/j.applthermaleng.2013.05.047 ↗
28. Bodin H (2010) Method of hot stamping and hardening a metal sheet, Patent No. US 7,678,208, March 16
29. Franzen V, Witulski J, Brosius A, Trompeter M, Tekkaya AE (2010) Textured surfaces for deep drawing tools by rolling. Int J Mach Tool Manuf 50(11):969–976. doi: 10.1016/j.ijmachtools.2010.08.00110.1016/j.ijmachtools.2010.08.001 ↗
30. Kleiner M, Weinert K, Krux R, Kalveram M (2003) Oberflächenstrukturen für Blechumformwerkzeuge–Einfluss spanend hergestellter Werkzeug-Oberflächenstrukturen auf die tribologischen Verhältnisse. WT Werkstattstechnik online 93:665–67010.37544/1436-4980-2003-10-665 ↗
31. Smith Metals (2015) Aluminium data sheets. http://www.smithmetal.com/downloads/aluminium_datasheets.htm . Accessed 28 Sept 2015
32. Garrett RP, Lin J, Dean TA (2005) An investigation of the effects of solution heat treatment on mechanical properties for AA 6xxx alloys: experimentation and modelling. Int J Plast 21(8):1640–1657. doi: 10.1016/j.ijplas.2004.11.00210.1016/j.ijplas.2004.11.002 ↗
33. Aginagalde A, Gomez X, Galdos L, Garcia C (2009) Heat treatment selection and forming strategies for 6082 aluminum alloy. J Eng Mater Technol 131(4):044501. doi: 10.1115/1.312038410.1115/1.3120384 ↗
34. Roliński E, Konieczny A, Sharp G (2009) Nature of surface changes in stamping tools of gray and ductile cast iron during gas and plasma nitrocarburizing. J Mater Eng Perform 18(8):1052–1059. doi: 10.1007/s11665-009-9352-710.1007/s11665-009-9352-7 ↗
35. Shang BC, Yin ZM, Wang G, Liu B, Huang ZQ (2011) Investigation of quench sensitivity and transformation kinetics during isothermal treatment in 6082 aluminum alloy. Mater Des 32(7):3818–3822. doi: 10.1016/j.matdes.2011.03.01610.1016/j.matdes.2011.03.016 ↗
36. El Fakir O, Wang L, Balint D, Dear JP, Lin J, Dean TA (2014) Numerical study of the solution heat treatment, forming, and in-die quenching (HFQ) process on AA5754. Int J Mach Tool Manuf 87:39–48. doi: 10.1016/j.ijmachtools.2014.07.00810.1016/j.ijmachtools.2014.07.008 ↗
37. Lin J, Liu Y (2003) A set of unified constitutive equations for modelling microstructure evolution in hot deformation. J Mater Process Technol 143–144:281–285. doi: 10.1016/S0924-0136(03)00472-210.1016/S0924-0136(03)00472-2 ↗
38. Foster AD, Mohamed MS, Lin J, Dean TA (2008) An investigation of lubricant and heat transfer for a sheet aluminium heat, form-quench (HFQ) process. Steel Res Int 79(11):113–120
39. ESI Group (2015) PAM-STAMP sheet metal forming software - material data base
40. Bai Q, Lin J, Zhan L, Dean TA, Balint DS, Zhang Z (2012) An efficient closed-form method for determining interfacial heat transfer coefficient in metal forming. Int J Mach Tool Manuf 56:102–110. doi: 10.1016/j.ijmachtools.2011.12.00510.1016/j.ijmachtools.2011.12.005 ↗
41. Ji K, Fakir OE, Gao HX, Wang LL (2015) Determination of heat transfer coefficient for hot stamping process. Mater Today Proc 2:434–439. doi: 10.1016/j.matpr.2015.05.05910.1016/j.matpr.2015.05.059 ↗