3D digital image correlation measurements during shaping of a non-crimp 3D orthogonal woven E-glass reinforcement
Source abstract
Abstract
This paper illustrates a methodology for the characterization of textile composite reinforcements during experimental simulation of forming processes. In particular, being the shear deformation considered as the primary deformation mechanism during shaping, the evolution of shear angle distribution on the reinforcement surface is measured by means of 3D digital image correlation analyses. Two different image correlation software programs, i.e. VIC-3D and MatchID3D, are used to study the forming process of a single layer E-glass non-crimp 3D orthogonal woven reinforcement (commercialized under trademark 3WEAVE® by 3Tex Inc.). The comparison of the displacement and shear angle distributions of the reinforcement, shaped on tetrahedral and double-dome moulds, pointed out a good agreement between the results obtained with both software packages.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Optical measurement and interference techniques · Mechanical Behavior of Composites · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Boisse P (2011) Composite reinforcements for optimum performance, Woodhead Publishing Limited10.1533/9780857093714 ↗
2. Willems A, Lomov SV, Verpoest I, Vandepitte D (2009) Drape-ability characterization of textile composite reinforcements using digital image correlation. Opt Lasers Eng 47:343–35110.1016/j.optlaseng.2008.03.012 ↗
3. Carvelli V, Pazmino J, Lomov SV, Verpoest I (2012) Deformability of a non-crimp 3D orthogonal weave E-glass composite reinforcement. Compos Sci Technol 73:9–1810.1016/j.compscitech.2012.09.004 ↗
4. Launay J, Hivet G, Duong AV, Boisse P (2008) Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcements. Compos Sci Technol 68:506–51510.1016/j.compscitech.2007.06.021 ↗
5. Vanclooster K, Lomov SV, Verpoest I (2009) Experimental validation of forming simulations of fabric reinforced polymers using an unsymmetrical mould configuration. Composites: Part A 40:530–53910.1016/j.compositesa.2009.02.005 ↗
6. Khan MA, Mabrouki T, Vidal-Sallè E, Boisse P (2010) Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark. J Mater Process Technol 210:378–38810.1016/j.jmatprotec.2009.09.027 ↗
7. Allaoui S, Boisse P, Chatel S, Hamila N, Hivet G, Soulat D, Vidal-Salle E (2011) Experimental and numerical analyses of textile reinforcement forming of a tetrahedral shape. Composites: Part A 42:612–62210.1016/j.compositesa.2011.02.001 ↗
8. Lomov SV, Boisse P, Deluycker E, Morestin F, Vanclooster K, Vandepitte D, Verpoest I (2008) Full-field strain measurements in textile deformability studies. Composites: Part A 38:1232–124410.1016/j.compositesa.2007.09.014 ↗
9. Polturi P, Parlak I, Ramgulam R, Sagar TV (2006) Analysis of tow deformations in textile preforms subjected to forming forces. Compos Sci Technol 66:297–30510.1016/j.compscitech.2005.04.039 ↗
10. Correlated Solutions, Inc. (2012) VIC-3D, Irmo, SC, USA: http://www.correlatedsolutions.com
11. MatchID - Image Correlation & Material Identification Mechanics of Materials, Products & Processes, http://www.matchid.org/ , 2012
12. Bogdanovich AE, Mohamed MH (2009) Three- dimensional reinforcement for composites. SAMPE J 45:8–28
13. Carvelli V, Gramellini G, Lomov SV, Bogdanovich AE, Mungalov DD, Verpoest I (2010) Fatigue behaviour of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass reinforced composites. Compos Sci Technol 70:2068–207610.1016/j.compscitech.2010.08.002 ↗
14. Desplentere F, Lomov SV, Woerdeman DL, Verpoest I, Wevers M, Bogdanovich A (2005) Micro-CT characterization of variability in 3D textile architecture. Compos Sci Technol 65:1920–193010.1016/j.compscitech.2005.04.008 ↗
15. Willems A (2008) Forming simulation of textile reinforced shell structures - PhD. Thesis, Katholieke Universiteit Leuven
16. Sutton MA, Orteu JJ, Shreir HW (2009) Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications, Springer