Modelling of ductile failure in aluminium sheet forming simulation
Source abstract
Abstract
In the present article novel approaches to account for localized necking, post-necking and ductile fracture in the numerical simulation of aluminium sheet forming are presented. The modelling concept was implemented in a commercial finite element software and is applied to an aluminium alloy sheet subjected to different forming operations. A validation of the simulation results by means of experiments is employed. It is shown that the proposed modelling framework is capable of accurately predicting the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Aretz H (2004) Applications of a new plane stress yield function to orthotropic steel and aluminium sheet alloys. Model Simul Mater Sci Eng 12:491–50910.1088/0965-0393/12/3/010 ↗
2. Aretz H (2005) A non-quadratic plane stress yield function for orthotropic sheet metals. J Mater Process Technol 168:1–910.1016/j.jmatprotec.2004.10.008 ↗
3. Aretz H (2006) A less hypothetical perspective on rate-independent continuum theory of metal plasticity. Mech Res Commun 33:734–73810.1016/j.mechrescom.2006.01.006 ↗
4. Aretz H, Hopperstad OS, Lademo O-G (2007) Yield function calibration based on uniaxial and plane strain tensile tests. J Mater Process Technol 186:221–23510.1016/j.jmatprotec.2006.12.037 ↗
5. Aretz H (2007) Numerical analysis of diffuse and localized necking in orthotropic sheet metals. Int J Plast 23:798–84010.1016/j.ijplas.2006.07.005 ↗
6. Aretz H (2007) A consistent plasticity theory of incompressible and hydrostatic pressure sensitive metals. Mech Res Commun 34:344–35110.1016/j.mechrescom.2007.01.002 ↗
7. Aretz H (2007) An advanced numerical differentiation scheme for plastic strain-rate computation. In: Cueto E, Chinesta F (eds) Proc 10th ESAFORM conference on material forming. AIP Publishing, pp 151–15610.1063/1.2729503 ↗
8. Aretz H (2008) A simple isotropic-distortional hardening model and its application in elastic-plastic analysis of localized necking in orthotropic sheet metals. Int J Plast 24:1457–148010.1016/j.ijplas.2007.10.002 ↗
9. Aretz H (2010) An extension of Hill’s localized necking model. Int J Eng Sci 48:312–33110.1016/j.ijengsci.2009.09.007 ↗
10. Argon AS, Im J, Safoglu R (1975) Cavity formation from inclusions in ductile fracture. Metall Trans A 6A:825–83710.1007/BF02672306 ↗
11. Arrieux R (1995) Determination and use of the forming limit stress diagrams in sheet metal forming. J Mater Process Technol 53:47–5610.1016/0924-0136(95)01960-M ↗
12. Banabic D, Bunge H-J, Pöhlandt K, Tekkaya AE (2000) Formability of metallic materials. Springer10.1007/978-3-662-04013-3 ↗
13. Bao Y, Wierzbicki T (2004) On fracture locus in the equivalent strain and stress triaxiality space. Int J Mech Sci 46:81–9810.1016/j.ijmecsci.2004.02.006 ↗
14. Bao Y, Wierzbicki T (2004) A comparative study on various ductile crack formation criteria. Trans ASME 126:314–324
15. Bao Y, Wierzbicki T (2005) On the cut-off value of negative triaxiality for fracture. Int J Mech Sci 72:1049–1069
16. Becker R (1987) The effect of porosity distribution on ductile failure. J Mech Phys Solids 35:577–59910.1016/0022-5096(87)90018-4 ↗
17. Belytschko T, Liu WK, Moran B (2000) Nonlinear finite elements for continua and structures. John Wiley & Sons
18. Bleck W (1999) Werkstoffprüfung in studium und praxis. Verlag Mainz, Wissenschaftsverlag, Aachen
19. Broek D (1973) The role of inclusions in ductile fracture and fracture toughness. Eng Fract Mech 5:55–6610.1016/0013-7944(73)90007-6 ↗
20. Brower WE, Singh SN (1972) Microcracks associated with inclusions in as-cast iron and their role during fracture. Metall Trans 3:3025–303110.1007/BF02652875 ↗
21. Clift SE, Hartley P, Sturgess CEN, Rowe GW (1990) Fracture prediction in plastic deformation processes. Int J Mech Sci 32:1–1710.1016/0020-7403(90)90148-C ↗
22. Clift SE (1992) Fracture in forming processes. In: Hartley P, Pillinger I, Sturgess C (eds) Numerical modelling of material deformation processes, Springer10.1007/978-1-4471-1745-2_16 ↗
23. Cockcroft MG, Latham DJ (1968) Ductility and the workability of metals. J Inst Met 96:33–39
24. Col A (2000) Forming limit diagrams—a survey. In: Banabic D (ed) Proc VII national conference on technologies and machine-tools for cold metal forming (TPR 2000), Cluj-Napoca, pp 29–51
25. Dodd B (1983) Shear instabilities in blanking and related processes. Met Technol 10:57–6010.1179/030716983803291550 ↗
26. French IE Weinrich PF (1976) The shear mode of ductile fracture in materials with few inclusions. Metall Trans A 7A:1841–184510.1007/BF02659814 ↗
27. Gao X, Kim J (2006) Modeling of ductile fracture: significance of void coalescence. Int J Solids Struct 43:6277–629310.1016/j.ijsolstr.2005.08.008 ↗
28. Ghosh AK (1976) A criterion for ductile fracture in sheets under biaxial loading. Metall Trans A 7A:523–53310.1007/BF02643968 ↗
29. Goijaerts AM (1999) Prediction of ductile fracture in metal blanking. Doctoral thesis, Technical University of Eindhoven, The Netherlands10.1115/1.1285909 ↗
30. Goodwin GM (1968) Application of strain analysis to sheet metal forming problems in the press shop. La Metall Ital 8:767–774
31. Graf A, Hosford W (1994) The influence of strain-path changes on forming limit diagrams of Al 6111 T4. Int J Mech Sci 36:897–91010.1016/0020-7403(94)90053-1 ↗
32. Gurland J, Plateau J (1963) The mechanism of ductile rupture of metals containing inclusions. Trans ASME 56:442–454
33. Gurson AL (1977) Continuum theory of ductile rupture by void nucleation and growth: part I—yield criteria and flow rules for porous ductile material. J Eng Mater Technol 99:2–1510.1115/1.3443401 ↗
34. Han HN, Kim K-H (2003) A ductile fracture criterion in sheet metal forming process. J Mater Process Technol 142:231–23810.1016/S0924-0136(03)00587-9 ↗
35. Hadianfard MJ, Smerd R, Winkler S, Worswick M (2008) Effects of strain rate on mechanical properties and failure mechanism of structural Al-Mg alloys. Mater Sci Eng A 492:283–29210.1016/j.msea.2008.03.037 ↗
36. Hill R (1952) On discontinuous plastic states. with special reference to localized necking in thin sheets. J Mech Phys Solids 1:19–3010.1016/0022-5096(52)90003-3 ↗
37. Hosford WF, Caddell RM (1993) Metal forming—mechanics and metallurgy, 2nd edn. Prentice Hall
38. Hu C, Ghosh S (2007) Micromechanical and macroscopic models of ductile fracture in particle reinforced metallic materials. Model Simul Mater Sci Eng 15:S377–S39210.1088/0965-0393/15/4/S05 ↗
39. Hu X, Wilkinson DS, Jain M, Mishra RK (2007) Modeling the influence of grain-level matrix inhomogeneity on strain localization in the presence of hard particles. Model Simul Mater Sci Eng 15:893–90910.1088/0965-0393/15/8/006 ↗
40. Huang M, Li Z (2006) Influences of particle size and interface energy on the stress concentration induced by the oblate spheroidal particle and the void nucleation mechanism. Int J Solids Struct 43:4097–411510.1016/j.ijsolstr.2005.04.015 ↗
41. Jain M, Allin J, Lloyd DJ (1999) Fracture limit prediction using ductile fracture criteria for forming of an automotive aluminum sheet. Int J Mech Sci 41:1273–128810.1016/S0020-7403(98)00070-8 ↗
42. Keeler SP, Backofen WA (1963) Plastic instability and fracture in sheets stretched over rigid punchs. Trans ASM 56:25–48
43. Khadke A, Ghosh S, Li M (2005) Numerical simulations and design of shearing process for aluminum alloys. Trans ASME 127:612–62110.1115/1.1899689 ↗
44. Kong X, Schlüter N, Arndt J (1993) Effects of the constraint parameter triaxial stress on the failure behaviour of steels. Steel Res 64:401–40610.1002/srin.199301044 ↗
45. Lademo O-G, Engler O, Keller S, Berstad T, Pedersen KO, Hopperstad OS (2009) Identification and validation of constitutive model and fracture criterion for AlMgSi alloy with application to sheet forming. Mater Des 30:3005–301910.1016/j.matdes.2008.12.020 ↗
46. Lemaitre J, Desmorat R (2005) Engineering damage mechanics—ductile, creep, fatigue and brittle failures. Springer-Verlag
47. León-Garcí O, Petrov R, Kerstens LAI (2010) Void initiation at TiN precipitates in IF steels during tensile deformation. Mater Sci Eng A 527:4202–420910.1016/j.msea.2010.03.071 ↗
48. Li M (2000) Micromechanisms of deformation and fracture in shearing aluminum alloy sheet. Int J Mech Sci 42:907–92310.1016/S0020-7403(99)00034-X ↗
49. Marciniak Z, Kuczyński K (1967) Limit strains in the process of stretch-forming sheet metal. Int J Mech Sci 9:609–62010.1016/0020-7403(67)90066-5 ↗
50. Marciniak Z, Kuczyński K, Pokora T (1973) Influence of the plastic properties of a material on the forming limit diagram for sheet metal in tension. Int J Mech Sci 15:789–80510.1016/0020-7403(73)90068-4 ↗
51. Marciniak Z, Duncan JL, Hu SJ (2002) Mechanics of sheet metal forming, 2nd edn. Butterworth-Heinemann
52. Maugin GA (1992) The thermomechanics of plasticity and fracture. Cambridge University Press10.1017/CBO9781139172400 ↗
53. McVeigh C, Liu WK (2006) Prediction of central bursting during axisymmetric cold extrusion of a metal alloy containing particles. Int J Solids Struct 43:3087–310510.1016/j.ijsolstr.2005.05.019 ↗
54. Müschenborn W, Sonne H-M (1975) Einfluß des Formänderungsweges auf die Grenzformänderungen des Feinblechs. Arch. Eisenhüttenwes 46:597–60210.1002/srin.197503686 ↗
55. Mulholland MM, Ege ES, Khraishi TA, Horstemeyer MF, Shen Y-L (2003) Cavity mediated strain localization and overall ductility in eutectic tin-lead alloy. Mater Sci Eng A360:160–16810.1016/S0921-5093(03)00429-5 ↗
56. Mulholland MM, Khraishi TA, Shen Y-L, Horstemeyer M (2006) Void growth and interaction experiments: implications to the optimal straining rate in superplastic forming. Int J Plast 22:1728–174410.1016/j.ijplas.2006.02.004 ↗
57. Niu L-B, Takaku H, Kobayashi M (2005) Tensile fracture behaviors in double-notched thin plates of a ductile steel. ISIJ Int 45:281–28710.2355/isijinternational.45.281 ↗
58. Rice JR, Tracey DM (1969) On the ductile enlargement of voids in triaxial stress fields. J Mech Phys Solids 17:201–21710.1016/0022-5096(69)90033-7 ↗
59. Sigvant M, Mattiasson K, Vegter H, Thilderkvist P (2009) A viscous pressure bulge test for the determination of a plastic hardening curve and equibiaxial material data. Int J Mater Form 2:235–24210.1007/s12289-009-0407-y ↗
60. Stahleisen NN (1996) Erscheinungsformen von Rissen und Brüchen—the appearance of cracks and fractures in metallic materials, 2nd edn. Stahlinstitut VDEh
61. Stoughton TB (2000) A general forming limit criterion for sheet metal forming. Int J Mech Sci 42:1–2710.1016/S0020-7403(98)00113-1 ↗
62. Stoughton TB, Zhu X (2004) Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD. Int J Plast 20:1463–148610.1016/j.ijplas.2003.11.004 ↗
63. Stoughton TB, Yoon J-W (2010) A new approach for failure criterion for sheet metals. Int J Plast (in press)
64. Swift HW (1952) Plastic instability under plane stress. J Mech Phys Solids 1:1–1810.1016/0022-5096(52)90002-1 ↗
65. Tai WH, Yang BX (1987) A damage criterion for ductile fracture and its modification applied to sheet metal forming. J Mech Work Technol 15:319–33310.1016/0378-3804(87)90046-5 ↗
66. Takuda H, Mori K, Takakura N, Yamaguchi K (2000) Finite element analysis of limit strains in biaxial stretching of sheet metals allowing for ductile fracture. Int J Mech Sci 42:785–79810.1016/S0020-7403(99)00018-1 ↗
67. Tirosh J, Abraham O (2007) On enhancing ductility of brittle-like materials by high confining hydro-pressure. Mech Mater 39:760–77210.1016/j.mechmat.2007.01.001 ↗
68. Wierzbicki T, Bao Y, Lee Y-W, Bai Y (2005) Calibration and evaluation of seven fracture models. Int J Mech Sci 47:719–74310.1016/j.ijmecsci.2005.03.003 ↗
69. Wang T, Hopperstad OS, Lademo O-G, Larsen PK (2007) Finite element analysis of welded beam-to-column joints in aluminium alloy EN AW 6082 T6. Finite Elem Anal Des 44:1–1610.1016/j.finel.2007.08.010 ↗
70. Wilkinson DS, Jain M, Hu X, Cingara GA, Mishra RK (2008) Microstructurally based models for shear localization and formability. In: Hirsch J, Skrotzki B, Gottstein G (eds) Aluminium alloys, vol 2. Wiley-VCH
71. Yoshida K, Kuwabara T, Kuroda M (2007) Path-dependence of the forming limit stresses in a sheet metal. Int J Plast 23:361–38410.1016/j.ijplas.2006.05.005 ↗
72. Yoshida K, Suzuki N (2008) Forming limit stresses predicted by phenomenological plasticity theories with anisotropic work-hardening behavior. Int J Plast 24:118–13910.1016/j.ijplas.2007.02.008 ↗
73. Zhao L, Sowerby R, Sklad MP (1996) A theoretical and experimental investigation of limit strains in sheet metal forming. Int J Mech Sci 38:1307–131710.1016/0020-7403(96)00014-8 ↗