Mechanical and geometrical approaches applied to composite fabric forming
Source abstract
Abstract
In this paper, we are interested in the forming of composite fabric by deep-drawing. Two approaches (geometrical and mechanical) are proposed for the simulation of the composite fabric forming. The geometrical approach is based on a fishnet model. It is well adapted to preliminary design phase and to give a suitable estimate of the resulting flat patterns. The mechanical approach is based on a meso-structural approach. It allows us to take into account the mechanical properties of composite fabric (fibres and resin) and the various dominant modes of deformation of fabrics during the forming process. During simulation of composite fabric forming, where large displacement and relative rotation of fibres are possible, severe mesh distortions occur after a few incremental steps. Hence an automatic mesh generation with remeshing capabilities is essential to carry out the finite element analysis. Some numerical simulations of forming process are proposed and compared with the experimental results in order to demonstrate the efficiency of the proposed approaches.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Structural Analysis and Optimization · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Trochu F, Ruiz E, Achim V, Soukane S (2006) Advanced numerical simulation of liquid composite molding for process analysis and optimization. Compos Part A Appl Sci Manuf 37:890–90210.1016/j.compositesa.2005.06.003 ↗
2. Marsh G (2006) Duelling with composites. Reinf Plast 50(6):18–2310.1016/S0034-3617(06)71040-2 ↗
3. Asthana R, Kumar A, Dahotre NB (2006) Composites get in deep with new-generation engine. Reinf Plast 50(11):26–2910.1016/S0034-3617(06)71188-2 ↗
4. Binétruy C (2004) Physique du moulage des composites avancés: aspects théoriques. Tech ing AM 3718:1–16
5. Boisse P (2004) Mise en forme des renforts fibreux de composites. Tech ing AM 3734:1–10
6. Billoët JL (1993) Introduction aux matériaux composites à hautes performances, Teknea
7. Rudd CD, Long AC (1997) Liguid molding technologies, Woodhead publishing Limited10.1533/9781845695446 ↗
8. Kawabata S, Niwa M, Kawai H (1973) The Finite deformation theory of plain-weave fabrics, Parts I, II and III. J Text Inst 64:21–8310.1080/00405007308630416 ↗
9. Lim TC, Ramakrishna S, Shang HM (1999) Optimization of the formability of knitted fabric composite sheet by means of combined deep drawing and stretch forming. J Mater Process Technol 89–90:99–10310.1016/S0924-0136(99)00030-8 ↗
10. Liu L, Chen J, Li X, Sherwood J (2005) Two-dimensional macro-mechanics shear models of woven fabrics. Compos Part A 36:105–11410.1016/j.compositesa.2004.07.004 ↗
11. Rozant O, Bourban PE, Manson JAE (2000) Drapability of dry textile fabrics for stampable thermoplastic performs. Compos Part A 31:1167–117710.1016/S1359-835X(00)00100-7 ↗
12. Hagege B, Boisse P, Billoёt JL (2004) Analysis and simulation of the constitutive behavior of fibrous reinforcements. In: Proceedings of Esaform 7 conference, Trondheim, avril. p. 317–20
13. Potluri P, Parlak I, Ramgulam R, Sagar TV (2006) Analysis of tow deformations in textile preforms subjected to forming forces. Compos Sci Technol 66(2):297–30510.1016/j.compscitech.2005.04.039 ↗
14. Cherouat A, Gelin JC, Boisse P, Sabhi H (1995) Modélisation de l’emboutissage des tissus de fibres de verre par la méthode des éléments finis. Rev Europ Elém Finis 4:159–182
15. Cherouat A, Billoët JL (2001) Mechanical and numerical modelling of composite manufacturing processes deep-drawing and laying-up of thin pre-impregnated woven fabrics. J Mat Proc Technol 118:460–47110.1016/S0924-0136(01)00987-6 ↗
16. Boisse P, Buet K, Gasser A, Launay J (2001) Meso/macro-mechanical behaviour of textile reinforcements for thin composites. Compos Sci Technol 61(3):395–40110.1016/S0266-3538(00)00096-8 ↗
17. Hamila N, Boisse P (2008) Simulations of textile composite reinforcement draping using a new semi-discrete three node finite element. Compos Part B Eng 39(6):999–101010.1016/j.compositesb.2007.11.008 ↗
18. ElHami A, Radi B, Cherouat A (2009) Treatment of the composite fabric’s shaping using a Lagrangian formulation, Math Comput Model 49(7–8):1337–134910.1016/j.mcm.2008.09.016 ↗
19. Warby MK, Whiteman JR, Jiang W-G, Warwick P, Wright T (2003) Finite element simulation of thermoforming processes for polymer sheets. Math Comput Simul 61:209–21810.1016/S0378-4754(02)00077-0 ↗
20. Nocent O (2001) Animation dynamique de corps déformables continues : application à la simulation de textile tricotés. Thèse de doctorat, université de Reims Champagne-Ardenne.
21. Lim T-C, Ramakrishna S (2002) Modelling of composite sheet forming: a review. Compos Part A Appl Sci Manuf 33:515–53710.1016/S1359-835X(01)00138-5 ↗
22. Borouchaki H, Cherouat A, Billoët JL (1999) GeomDrap New Computer Aided Design and Manufacturing for Advanced Textile Composites, Version 1.
23. Borouchaki H, Cherouat A (2003) Drapage géométrique des composites. C R Acad Sci Paris, Série II B, mécanique des solides et des structures 331:437–442
24. Harrison P, Clifford MJ, Long AC, Rudd CD (2004) A constituent-based predictive approach to modelling the rheology of viscous textile. Compos Part A 35:915–93110.1016/j.compositesa.2004.01.005 ↗
25. Van Der Ween F (1999) Algorithms for draping fabrics on doubly curved surfaces. Int J Num Meth Engng 31:1415–142610.1002/nme.1620310712 ↗
26. Hancock SG, Potter KD (2005) Inverse drape modelling—an investigation of the set of shapes that can be formed from continuous aligned woven fibre reinforcements. Compos Part A Appl Sci Manuf 36(7):947–95310.1016/j.compositesa.2004.12.001 ↗
27. Vanclooster K, Lomov SV, Verpoest I (2009) Experimental validation of forming simulations of fabric reinforced polymers using an unsymmetrical mould configuration. Compos Part A Appl Sci Manuf 40(4):530–53910.1016/j.compositesa.2009.02.005 ↗
28. Potluri P, Sharma S, Ramgulam R (2001) Comprehensive drape modelling for moulding 3D textile preforms. Compos Part A Appl Sci Manuf 32(10):1415–142410.1016/S1359-835X(01)00040-9 ↗
29. Sharma SB, Sutcliffe MPF (2004) A simplified finite element model for draping of woven material. Compos Part A Appl Sci Manuf 35(6):637–64310.1016/j.compositesa.2004.02.013 ↗
30. BenNaceur I, Cherouat A, Borouchaki H, Bachmann JM (2003) Caractérisation et modélisation de l’aptitude à la déformation des structures souples. Revue des composites et des matériaux avancés, N° 310.3166/rcma.13.231-240 ↗
31. Umer R, Bickerton S, Fernyhough A (2008) Modelling the application of wood fibre reinforcements within liquid composite moulding processes. Compos Part A Appl Sci Manuf 39(4):624–63910.1016/j.compositesa.2007.08.023 ↗
32. Frishfelds V, Staffan Lundström T, Jakovics A (2008) Bubble motion through non-crimp fabrics during composites manufacturing. Compos Part A Appl Sci Manuf 39(2):243–2510.1016/j.compositesa.2007.10.020 ↗
33. Long AC (2001) Process modelling for liquid moulding of braided performs. Compos Part A Appl Sci Manuf 32(7):941–95310.1016/S1359-835X(00)00153-6 ↗
34. Fan JP, Tang CY, Tsui CP, Chan LC, Lee TC (2006) 3D finite element simulation of deep drawing with damage development. Int J Mach Tools Manufacture 46(9):1035–104410.1016/j.ijmachtools.2005.07.044 ↗
35. Borouchaki H, Cherouat A, Laug P, Saanouni K (2002) Adaptative meshing for ductile fracture prediction in metal forming. C R Mec 330(10):709–71610.1016/S1631-0721(02)01519-X ↗
36. Giraud-Moreau L, Borouchaki H, Cherouat A (2005) Remaillage adaptatif pour la mise en forme des tôles minces. C R Acad Sci Paris, Serie II B, Mécanique des Solides et des Structures 333 (4):371–378
37. Cho J-W, Yang D-Y (2002) A mesh refinement scheme for sheet metal forming analysis. Proc. of the 5th International Conference, NUMISHEET’02, pp. 307–312
38. Fourment L, Chenot J-L (1994) Adaptive remeshing and error control for forming processes. Rev Europ élém finis 3(2):247–27910.1080/12506559.1994.10511123 ↗
39. Bergsma OK, Huisman J (1988) Deep drawing of fabric reinforced thermoplastic, 2nd Inter. Conf. Comp. Aided Design in Composite Material Technology, p. 323–333.
40. Gommers B, Verpoest I, Van Houtte P (1996) Modelling the elastic properties of knitted fabric-reinforced composites. Compos Sci Technol 56:685–69410.1016/0266-3538(96)00053-X ↗
41. Peng X, Cao J (2002) A dual homogenization and finite element approach for material characterization of textile composites. Compos Part Eng 33:45–5610.1016/S1359-8368(01)00052-X ↗
42. Luo Y, Verpoest I (2002) Biaxial tension and ultimate deformation of knitted fabric reinforcements. Compos Part A Appl Sci Manuf 33:197–20310.1016/S1359-835X(01)00106-3 ↗
43. Padmanabhan KA (2008) Metal forming at very low strain rates. Encyclopedia of Materials: Science and Technology, pp. 5384–5389
44. Blanlot R, Billoët JL (1996) Loi de comportement orthotrope évolutive pour la simulation de la mise en forme des tissus composites. National Journey of Composites, pp. 761–772
45. ten Thije RHW, Akkerman R, Huétink J (2007) Large deformation simulation of anisotropic material using an updated Lagrangian finite element method. Comput Methods Appl Mech Eng 196(33–34):3141–315010.1016/j.cma.2007.02.010 ↗
46. Gilormini P, Roudier P (1993) Abaqus and Finite Strain, Rapport interne n° 140, Cachan
47. Abaqus theory (2004) User’s Manual
48. Penso F (1999) Adaptation d’un banc de simulation expérimentale Réalisation d’essais de validation expérimentale : Simulation numérique d’essais de mise en forme. Université de Technologie de Troyes-ENSAM LM2S
49. Cherouat A, Borouchaki H (2009) Actual state of the art of composite fabric forming: geometrical and mechanical approaches. Materials 2(4):1835–185710.3390/ma2041835 ↗
50. Zhu YY, Zacharia T, Cescotto S (1997) Application of fully automatic remeshing to complex metal forming analyses. Comp Struct 62(3):417–42710.1016/S0045-7949(96)00231-3 ↗
51. Gifford LN (1979) More on distorted isoparametric elements. Int J Numer Meth Engng 14:290–29110.1002/nme.1620140212 ↗
52. Babuska I, Zienkiewicz OC, Gago J, Olivera DA (eds) (1986) Accuracy Estimates and Adaptive Refinements in Finite Element Computations, John Wiley
53. Baker TJ (1989) Automatic mesh generation for complex three-dimensional regions using a constrained delaunay triangulation. Eng Comput 5,:161–17510.1007/BF02274210 ↗
54. Zienkiewicz OC, Zhu JZ (1987) A simple error estimator and adaptive procedure for practical engineering analysis. Int J Numer Meth Engng 24:337–35710.1002/nme.1620240206 ↗
55. Oden JT, Demkowicz L, Rachowicz W, Westermann TA (1989) Towards a universal h-p adaptive finite element strategy, part 2. A posteriori error estimation. Comp Meth App Mech Engng 77:113–18010.1016/0045-7825(89)90130-8 ↗