Influence of machine parameters on material flow behavior during channeling in modified friction stir channeling
Source abstract
Abstract
Material flows during friction stir processes are very complex and not fully understood. Although the most literature reviews are presenting for material flow path, but Modified Friction Stir Channeling (MFSC) is a novel process based on Friction Stir Processing (FSP), which is being utilized to produce internal channel in Monolithic plates. A new flow pattern, in this study, is proposed to investigate material flow path and channel formation mechanism. The validity of this model is demonstrated by observing the cross-section and created keyhole using stop-action technique. The main difference between Friction Stir Channeling (FSC) and MFSC is the tilt angle. The effect of tilt angle and process parameters such as rotational speed and traverse speed on material flow path is studied. The results indicate that the tilt angle is an effective factor on forging of material behind of pin in the Advancing Side (AS) and also in the upper portion of channel roof imperfections. The rotational speed is an effective parameter on extruded material around the tool pin body and the extracted material in front of tool pin, because of the changing in the slip–stick condition and generated heat by tool. Traverse speed was an effective parameter on forging action of material and to keep material nearby tool pin in the behind of pin.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Lorrain O, Favier V, Zahrouni H, Lawrjaniec D (2010) Understanding the material flow path of friction stir welding process using unthreaded tools. J Mater Process Technol 210(4):603–609. doi: 10.1016/j.jmatprotec.2009.11.00510.1016/j.jmatprotec.2009.11.005 ↗
2. Mishra RS, Ma ZY (2005) Friction stir welding and processing. Mater Sci Eng: R: Rep 50(1–2):1–78. doi: 10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
3. Su J-Q, Nelson TW, Sterling CJ (2005) Microstructure evolution during FSW/FSP of high strength aluminum alloys. Mater Sci Eng A 405(1–2):277–286. doi: 10.1016/j.msea.2005.06.009
4. Giles TLKO-I, Zhilyaev AP, Swaminathan S, Mahoney MW (2009) The effect of friction stir processing on the microstructure and mechanical properties of an aluminum lithium alloy. Metal Mater Trans A 40(1):104–11510.1007/s11661-008-9698-8 ↗
5. Chen H-B, Yan K, Lin T, Chen S-B, Jiang C-Y, Zhao Y (2006) The investigation of typical welding defects for 5456 aluminum alloy friction stir welds. Mater Sci Eng A 433(1–2):64–69. doi: 10.1016/j.msea.2006.06.05610.1016/j.msea.2006.06.056 ↗
6. Balasubramanian V (2008) Relationship between base metal properties and friction stir welding process parameters. Mater Sci Eng A 480(1–2):397–403. doi: 10.1016/j.msea.2007.07.04810.1016/j.msea.2007.07.048 ↗
7. Kim YG, Fujii H, Tsumura T, Komazaki T, Nakata K (2006) Three defect types in friction stir welding of aluminum die casting alloy. Mater Sci Eng A 415(1–2):250–254. doi: 10.1016/j.msea.2005.09.07210.1016/j.msea.2005.09.072 ↗
8. Chen DLaZ (2010) Friction stir welding From basics to applications. Wood head publishing limited,
9. Mishra RS (2005) Integral channels in metal components. USA Pat 6:923,362
10. Balasubramanian N, Mishra RS, Krishnamurthy K (2009) Friction stir channeling: characterization of the channels. J Mater Process Technol 209(8):3696–3704. doi: 10.1016/j.jmatprotec.2008.08.03610.1016/j.jmatprotec.2008.08.036 ↗
11. Balasubramanian N, Mishra RS, Krishnamurthy K (2011) Process forces during friction stir channeling in an aluminum alloy. J Mater Process Technol 211(2):305–311. doi: 10.1016/j.jmatprotec.2010.10.00510.1016/j.jmatprotec.2010.10.005 ↗
12. Balasubramanian N, Mishra RS, Krishnamurthy K (2010) Development of a mechanistic model for friction stir channeling. J Manuf Sci Eng 132(5):054504–054504. doi: 10.1115/1.400245310.1115/1.4002453 ↗
13. Rashidi A, Mostafapour A, Salahi S, Rezazadeh V (2012) Modified friction stir channeling: a novel technique for fabrication of friction stir channel. Appl Mech Mater 302:365–370. doi: 10.4028/www.scientific.net/AMM.302.36510.4028/www.scientific.net/AMM.302.365 ↗
14. Colegrove PA, Shercliff HR (2005) 3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile. J Mater Process Technol 169(2):320–327. doi: 10.1016/j.jmatprotec.2005.03.01510.1016/j.jmatprotec.2005.03.015 ↗
15. Hattingh DG, Blignault C, van Niekerk TI, James MN (2008) Characterization of the influences of FSW tool geometry on welding forces and weld tensile strength using an instrumented tool. J Mater Process Technol 203(1–3):46–57. doi: 10.1016/j.jmatprotec.2007.10.02810.1016/j.jmatprotec.2007.10.028 ↗
16. Leonard AJaSAL (2003) Flaws in FSW. Paper presented at the 4th International FSW Symposium, Utah, USA
17. Chen ZW, Peris R, Maginness R (2006) Material flow in the upper weld zone during friction stir welding. Int J Mod Phys B 20(25n27):4081–4086. doi: 10.1142/S021797920604089110.1142/S0217979206040891 ↗
18. Colligan K (1999) Material flow behavior during friction stir welding of aluminum. Weld J 78(9):229–237
19. Reynolds AP (2000) Visualisation of material flow in autogenous friction stir welds. Sci Technol Weld Join 5(2):120–124. doi: 10.1179/13621710010153811910.1179/136217100101538119 ↗
20. Chen ZW, Pasang T, Qi Y (2008) Shear flow and formation of nugget zone during friction stir welding of aluminium alloy 5083-O. Mater Sci Eng A 474(1–2):312–316. doi: 10.1016/j.msea.2007.05.07410.1016/j.msea.2007.05.074 ↗
21. Prangnell PB, Heason CP (2005) Grain structure formation during friction stir welding observed by the ‘stop action technique’. Acta Mater 53(11):3179–3192. doi: 10.1016/j.actamat.2005.03.04410.1016/j.actamat.2005.03.044 ↗
22. Nandan R, DebRoy T, Bhadeshia HKDH (2008) Recent advances in friction-stir welding—Process, weldment structure and properties. Prog Mater Sci 53(6):980–1023. doi: 10.1016/j.pmatsci.2008.05.00110.1016/j.pmatsci.2008.05.001 ↗
23. Rashidi A, Mostafapour A, Rezazadeh V, Salahi S (2012) Channel formation in modified friction stir channeling. Appl Mech Mater 302:371–376. doi: 10.4028/www.scientific.net/AMM.302.37110.4028/www.scientific.net/AMM.302.371 ↗
24. Lohwasser D, Chen Z (2010) Friction Stir Welding: From Basics to Applications. CRC Press10.1533/9781845697716 ↗
25. Kumar K, Kailas SV (2008) The role of friction stir welding tool on material flow and weld formation. Mater Sci Eng A 485(1–2):367–374. doi: 10.1016/j.msea.2007.08.01310.1016/j.msea.2007.08.013 ↗
26. Zhang Z, Zhang HW (2008) A fully coupled thermo-mechanical model of friction stir welding. Int J Adv Manuf Technol 37(3–4):279–293. doi: 10.1007/s00170-007-0971-610.1007/s00170-007-0971-6 ↗
27. Zhang Z, Zhang HW (2009) Numerical studies on controlling of process parameters in friction stir welding. J Mater Process Technol 209(1):241–270. doi: 10.1016/j.jmatprotec.2008.01.04410.1016/j.jmatprotec.2008.01.044 ↗
28. Nandan R, Roy GG, Lienert TJ, Debroy T (2007) Three-dimensional heat and material flow during friction stir welding of mild steel. Acta Mater 55(3):883–895. doi: 10.1016/j.actamat.2006.09.00910.1016/j.actamat.2006.09.009 ↗
29. Arbegast WJ (2008) A flow-partitioned deformation zone model for defect formation during friction stir welding. Scr Mater 58(5):372–376. doi: 10.1016/j.scriptamat.2007.10.03110.1016/j.scriptamat.2007.10.031 ↗
30. Zhang GF, Su W, Zhang J, Zhang JX (2011) Visual observation of effect of tilting tool on forging action during FSW of aluminium sheet. Sci Technol Weld Join 16(1):87–91. doi: 10.1179/136217110x1271421730965010.1179/136217110X12714217309650 ↗
31. Prado RA, Murr LE, Soto KF, McClure JC (2003) Self-optimization in tool wear for friction-stir welding of Al 6061 + 20 % Al2O3 MMC. Mater Sci Eng A 349(1–2):156–165. doi: 10.1016/s0921-5093(02)00750-510.1016/S0921-5093(02)00750-5 ↗
32. Li Y, Murr LE, McClure JC (1999) Flow visualization and residual microstructures associated with the friction-stir welding of 2024 aluminum to 6061 aluminum. Mater Sci Eng A 271(1–2):213–223. doi: 10.1016/S0921-5093(99)00204-X10.1016/S0921-5093(99)00204-X ↗
33. C-s W, W-b Z, Shi L, M-a C (2012) Visualization and simulation of plastic material flow in friction stir welding of 2024 aluminium alloy plates. Trans Nonferrous Metals Soc China 22(6):1445–1451. doi: 10.1016/S1003-6326(11)61339-310.1016/S1003-6326(11)61339-3 ↗
34. Kumar R, Singh K, Pandey S (2012) Process forces and heat input as function of process parameters in AA5083 friction stir welds. Trans Nonferrous Metals Soc China 22(2):288–298. doi: 10.1016/S1003-6326(11)61173-410.1016/S1003-6326(11)61173-4 ↗
35. Karthikeyan L, Senthil Kumar VS (2011) Relationship between process parameters and mechanical properties of friction stir processed AA6063-T6 aluminum alloy. Mater Design 32(5):3085–3091. doi: 10.1016/j.matdes.2010.12.04910.1016/j.matdes.2010.12.049 ↗
36. Hirata T, Oguri T, Hagino H, Tanaka T, Chung SW, Takigawa Y, Higashi K (2007) Influence of friction stir welding parameters on grain size and formability in 5083 aluminum alloy. Mater Sci Eng A 456(1–2):344–349. doi: 10.1016/j.msea.2006.12.07910.1016/j.msea.2006.12.079 ↗
37. Frigaard Ø, Grong Ø, Midling OT (2001) A process model for friction stir welding of age hardening aluminum alloys. Metall Mat Trans A 32(5):1189–1200. doi: 10.1007/s11661-001-0128-410.1007/s11661-001-0128-4 ↗
38. Deng Z, Lovell MR, Tagavi KA (2000) Influence of material properties and forming velocity on the interfacial slip characteristics of cross wedge rolling. J Manuf Sci Eng 123(4):647–653. doi: 10.1115/1.138302810.1115/1.1383028 ↗