Double-diaphragm forming of highly aligned short-fibre preforms for complex composite parts
Source abstract
Abstract
Abstract Forming small to medium composite parts with complex geometries presents significant challenges to engineers, primarily due to material-induced, in-process defects such as fibre bridging and wrinkling, leading to poor mould conformity. These issues are characteristic of continuous fibre preforms and the inextensibility of the fibres. HiPerDiF (High Performance Discontinuous Fibre) technology is a novel manufacturing technique to produce high-performance, aligned discontinuous fibre pre-preg materials. This study investigates the forming characteristics of prepreg manufactured using the HiPerDiF method, highlighting its viability for complex part manufacture where mould conformity is critical. Additionally, a previously developed finite element (FE) model, able to predict the behaviour discontinuous fibre preforms during double diaphragm forming (DDF), was used to obtain insights into the experimentally observed material deformation. The results demonstrated the advantage of the enhanced formability of the HiPerDiF preform, owing to its stretchability in the double-diaphragm vacuum forming process. The FE simulations were shown to be a powerful tool to gain understanding of preforms deformation and thickness variation which are otherwise difficult to measure experimentally. Graphical abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Metal Forming Simulation Techniques · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Krebs J, Friedrich K, Bhattacharyya D (1998) A direct comparison of matched-die versus diaphragm forming. Compos Part Appl Sci Manuf 29:183–188. https://doi.org/10.1016/S1359-835X(97)82706-610.1016/S1359-835X(97)82706-6 ↗
2. Sjölander J, Hallander P, Åkermo M (2016) Forming induced wrinkling of composite laminates: a numerical study on wrinkling mechanisms. Compos Part Appl Sci Manuf 81:41–51. https://doi.org/10.1016/j.compositesa.2015.10.01210.1016/j.compositesa.2015.10.012 ↗
3. Thompson AJ, Belnoue JPH, Hallett SR (2020) Modelling defect formation in textiles during the double diaphragm forming process. Compos Part B Eng 202:108357. https://doi.org/10.1016/j.compositesb.2020.10835710.1016/j.compositesb.2020.108357 ↗
4. Boisse P, Colmars J, Hamila N, Naouar N, Steer Q (2018) Bending and wrinkling of composite fiber preforms and prepregs. A review and new developments in the draping simulations. Compos Part B Eng 141:234–249. https://doi.org/10.1016/j.compositesb.2017.12.06110.1016/j.compositesb.2017.12.061 ↗
5. Chen S, McGregor OPL, Harper LT, Endruweit A, Warrior NA (2018) Optimisation of local in-plane constraining forces in double diaphragm forming. Compos Struct 201:570–581. https://doi.org/10.1016/j.compstruct.2018.06.06210.1016/j.compstruct.2018.06.062 ↗
6. Viisainen JV, Yu F, Codolini A, Chen S, Harper LT, Sutcliffe MPF (2023) Rapidly predicting the effect of tool geometry on the wrinkling of biaxial NCFs during composites manufacturing using a deep learning surrogate model. Compos Part B Eng 253:110536. https://doi.org/10.1016/j.compositesb.2023.11053610.1016/j.compositesb.2023.110536 ↗
7. Such M, Ward C, Potter K (2014) Aligned discontinuous fibre composites: a short history. J Multifunct Compos 2:155–168. https://doi.org/10.12783/issn.2168-4286/2/3/4/such10.12783/issn.2168-4286/2/3/4/such ↗
8. Okine RK, Edison D (1990) Properties and formability of an aligned discontinuous fiber thermoplastic composite sheet. Reinf Plast Compos 8:70–9010.1177/073168449000900105 ↗
9. Cender TA, Simacek P, Gillespie JW, Advani SG (2024) Microstructural evolution of highly aligned discontinuous fiber composites during longitudinal extension in forming. Compos Sci Technol 254:110649. https://doi.org/10.1016/j.compscitech.2024.11064910.1016/j.compscitech.2024.110649 ↗
10. Morris KS, Cender TA, Thostenson ET, Yarlagadda S (2025) Forming limits of highly aligned discontinuous fiber composite laminates. Compos Part Appl Sci Manuf 190:108683. https://doi.org/10.1016/j.compositesa.2024.10868310.1016/j.compositesa.2024.108683 ↗
11. Tomlin LJ, Cender TA, Sauerbrunn S, Advani SG (2024) Methodology to Establish a forming process window for thermoset aligned discontinuous fiber composites. Compos Part Appl Sci Manuf 183:108064. https://doi.org/10.1016/j.compositesa.2024.10806410.1016/j.compositesa.2024.108064 ↗
12. Yu H, Potter KD, Wisnom MR (2014) A novel manufacturing method for aligned discontinuous fibre composites (high performance-discontinuous fibre method). Compos Part Appl Sci Manuf 65:175–185. https://doi.org/10.1016/j.compositesa.2014.06.00510.1016/j.compositesa.2014.06.005 ↗
13. Alshahrani H, Hojjati M (2017) Experimental and numerical investigations on formability of out-of-autoclave thermoset prepreg using a double diaphragm process. Compos Part Appl Sci Manuf 101:199–214. https://doi.org/10.1016/j.compositesa.2017.06.02110.1016/j.compositesa.2017.06.021 ↗
14. Wang L, Wang J, Liu M, Peng X (2020) Development and verification of a finite element model for double diaphragm preforming of unidirectional carbon fiber prepreg. Compos Part Appl Sci Manuf 135:105924. https://doi.org/10.1016/j.compositesa.2020.10592410.1016/j.compositesa.2020.105924 ↗
15. Sun X, Belnoue J, Wang WT, Kim BC, Hallett S (2021) Un-forming fibre-steered preforms: towards fast and reliable production of complex composite parts. Compos Sci Technol 216:109060. https://doi.org/10.1016/j.compscitech.2021.10906010.1016/j.compscitech.2021.109060 ↗
16. Yavuz BO, Hamerton I, Longana ML, Belnoue JP-H (2025) Modelling the tensile behaviour of aligned discontinuous carbon fibre thermoplastic matrix composites under processing conditions. Compos Sci Technol 269:111252. https://doi.org/10.1016/j.compscitech.2025.11125210.1016/j.compscitech.2025.111252 ↗
17. Hecker MD, Longana ML, Eloi JC, Thomsen O, Hamerton I (2023) Recycling end-of-life sails by carbon fibre reclamation and composite remanufacture using the HiPerDiF fibre alignment technology. Compos Part Appl Sci Manuf 173:107651. https://doi.org/10.1016/j.compositesa.2023.10765110.1016/j.compositesa.2023.107651 ↗
18. Zhang B, Kim BC (2022) A modified picture frame test to characterise unidirectional carbon/epoxy prepregs subjected to large shear deformation. In: 18th European Mechanics of Materials Conference, Apr. Accessed: Nov. 28, 2024. [Online]. Available: https://research-information.bris.ac.uk/en/publications/a-modified-picture-frame-test-to-characterise-unidirectional-carb
19. Ikotun AM, Ezugwu AE, Abualigah L, Abuhaija B, Heming J (2023) K-means clustering algorithms: a comprehensive review, variants analysis, and advances in the era of big data. Inf Sci 622:178–210. https://doi.org/10.1016/j.ins.2022.11.13910.1016/j.ins.2022.11.139 ↗
20. McKeen LW (2016) Thermoplastic elastomers. Fatigue and tribological properties of plastics and elastomers, 3rd edn. Elsevier, Amsterdam, pp 279–289. https://doi.org/10.1016/B978-0-323-44201-5.00010-1.10.1016/B978-0-323-44201-5.00010-1 ↗
21. Ferré Sentis D, Cochereau T, Orgéas L, Dumont PJJ, Rolland du Roscoat S, Laurencin T, Terrien M, Sager M (2017) Tensile behaviour of uncured sheet moulding compounds: rheology and flow-induced microstructures. Compos Part Appl Sci Manuf 101:459–470. https://doi.org/10.1016/j.compositesa.2017.07.00310.1016/j.compositesa.2017.07.003 ↗
22. Zhang B, Kim BC (2022) Experimental characterisation of large in-plane shear behaviour of unidirectional carbon fibre/epoxy prepreg tapes for continuous tow shearing (CTS) process. Compos Part Appl Sci Manuf 162:107168. https://doi.org/10.1016/j.compositesa.2022.10716810.1016/j.compositesa.2022.107168 ↗
23. Kowalski P, Smyk R (2018) Review and comparison of smoothing algorithms for one-dimensional data noise reduction. In: 2018 International Interdisciplinary PhD Workshop (IIPhDW), IEEE, pp 277–281. https://doi.org/10.1109/IIPHDW.2018.838837310.1109/IIPHDW.2018.8388373 ↗
24. Chen S, Thompson AJ, Dodwell TJ, Hallett SR, Belnoue JPH (2024) But how can I optimise my high-dimensional problem with only very little data? – a composite manufacturing application. Int J Solids Struct 300:112941. https://doi.org/10.1016/j.ijsolstr.2024.11294110.1016/j.ijsolstr.2024.112941 ↗
25. Chen S, Thompson A, Dodwell T, Hallett SR, Belnoue JPH (2025) A comparison between robust design and digital twin approaches for non-crimp fabric (NCF) forming. Compos Part A Appl Sci Manuf 193:108864. https://doi.org/10.1016/j.compositesa.2025.10886410.1016/j.compositesa.2025.108864 ↗
26. Advani SG (1994) Flow and rheology in polymer composites manufacturing, vol 10, first edn. Elsevier, Amsterdam
27. Boisse P, Hamila N, Vidal-Sallé E, Dumont F (2011) Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses. Compos Sci Technol 71(5):683–692. https://doi.org/10.1016/j.compscitech.2011.01.01110.1016/j.compscitech.2011.01.011 ↗
28. Chen S, Talokder T, Mahadik Y, Thompson A, Hallett SR, Belnoue JPH (2025) Preform variability propagation in non-crimp fabric (NCF) forming. Compos Part B: Eng 299:112418. https://doi.org/10.1016/j.compositesb.2025.11241810.1016/j.compositesb.2025.112418 ↗
29. Teijin Carbon Europe, Product Data Sheet (2024) TSG01en EU filament. www.teijincarbon.com, Available. [Online]
30. Messmer LL, Kandemir A, Yavuz BO, Longana ML, Hamerton I (2024) Mechanical behaviour of As-manufactured and repaired aligned discontinuous basalt fibre-reinforced vitrimer composites. Polymers. https://doi.org/10.3390/polym1608108910.3390/polym16081089 ↗
31. Badel P, Vidal-Sallé E, Boisse P (2008) Large deformation analysis of fibrous materials using rate constitutive equations. Comput Struct 86:1164–1175. https://doi.org/10.1016/j.compstruc.2008.01.00910.1016/j.compstruc.2008.01.009 ↗