The analysis of flow behavior of Ti-6Al-2Sn-4Zr-6Mo alloy based on the processing maps
Source abstract
Abstract
Abstract The paper presents the analysis of hot deformation behavior of Ti-6Al-2Sn-4Zr-6Mo (Ti-6246) alloy using the theory of dynamic material modeling (DMM) based on hot compression tests performed to a total true strain of 1 at the strain rates from 0.01 to 100 s−1 and at the temperatures within the range between 800 and 1100 °C. The processing maps according to the Prasad’s criterion were developed. The analysis of the processing maps allowed for the placement of domains describing the areas of potentially favorable combinations of hot deformation parameters. The microstructure observations of the investigated alloy specimens after hot deformation in stability and instability areas were conducted. The optimal processing parameters for numerical modeling of Ti-6246 alloy forging were selected based on processing maps. After complex analysis of the obtained results, microstructural observations and numerical modeling of forging of selected part, the forging tests of Ti-6246 alloy were realized. The obtained product quality assessment was carried out by computed tomography non-destructive testing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Huda Z, Edi P (2013) Materials selection in design of structures and engines of supersonic aircrafts: a review. Mater Des 46(4):552–560. https://doi.org/10.1016/j.matdes.2012.10.00110.1016/j.matdes.2012.10.001 ↗
2. Bhattachayya D, Viswanathan GB, Denkenberger R, Furrer D, Fraser HL (2003) The role of crystallographic and geometrical relationships between α and β phases in an α/β titanium alloy. Acta Mater 51(16):4679–4691. https://doi.org/10.1016/S1359-6454(03)00179-410.1016/S1359-6454(03)00179-4 ↗
3. Boyer R, Collings EW, Welsch G (1994) Materials properties handbook: titanium alloys. ASM International, p 479
4. Glavicic MG, Bartha BB, Jha SK, Szczepanski CJ (2009) The origins of microtexture in duplex Ti alloys. Mater Sci Eng A 513–514:325–328. https://doi.org/10.1016/j.msea.2009.02.00310.1016/j.msea.2009.02.003 ↗
5. Krawczyk J, Łukaszek-Sołek A, Dąbrowski R (2015) The role of the deformation conditions in the evolution of the microstructure of Ti-6Al-2Sn-4Zr-6Mo alloy. Key Eng Mater 641:116–119. https://doi.org/10.4028/www.scientific.net/KEM.641.11610.4028/www.scientific.net/KEM.641.116 ↗
6. Jackson M, Dashwood RJ, Christodoulou L, Flower HM (2002) Isothermal subtransus forging of Ti-6Al–2Sn–4Zr–6Mo. J Light Met 2(3):185–195. https://doi.org/10.1016/S1471-5317(02)00044-510.1016/S1471-5317(02)00044-5 ↗
7. Tarín P, Alonso I, Simón AG, Badía JM, Piris NM (2008) Characterization of the α↔β transformations in a Ti-6Al–2Sn–4Zr–6Mo (wt.%) alloy. Mater Sci Eng A 481(1):559–561. https://doi.org/10.1016/j.msea.2006.12.19310.1016/j.msea.2006.12.193 ↗
8. Dehghan-Manshadi A, Dippenaar RJ (2012) Strain-induced phase transformation during thermo-mechanical processing of titanium alloys. Mater Sci Eng A 552:451–456. https://doi.org/10.1016/j.msea.2012.05.06910.1016/j.msea.2012.05.069 ↗
9. Qiu J, Ma Y, Lei J, Liu Y, Huang A, Rugg D, Yang R (2014) A comparative study on dwell fatigue of Ti-6Al-2Sn-4Zr-xMo (x=2 to 6) alloys on a microstructure-normalized basis. Metall Mater Trans A 45(13):6075–6087. https://doi.org/10.1007/s11661-014-2541-510.1007/s11661-014-2541-5 ↗
10. Hémery S, Villechaise P (2017) Comparison of slip system activation in Ti-6Al-2Sn-4Zr-2Mo and Ti-6Al-2Sn-4Zr-6Mo under tensile, fatigue and dwell-fatigue loadings. Mater Sci Eng A 697:177–183. https://doi.org/10.1016/j.msea.2017.05.02110.1016/j.msea.2017.05.021 ↗
11. Prasad YVRK, Gegel HL, Doraivelu SM, Malas JC, Morgan JT, Lark KA, Barker DR (1984) Modelling of dynamic materials behavior in hot deformation: forging of Ti-6242. Metall Trans A 15(10):1883–1892. https://doi.org/10.1007/BF0266490210.1007/BF02664902 ↗
12. Prasad YVRK, Seshacharyulu T (1998) Processing maps for hot working of titanium alloys. Mater Sci Eng A 243(1–2):82–88. https://doi.org/10.1016/S0921-5093(97)00782-X10.1016/S0921-5093(97)00782-X ↗
13. Luo J, Li M, Yu W, Li H (2009) Effect of the strain on processing maps of titanium alloys in isothermal compression. Mater Sci Eng A 504(1–2):90–98. https://doi.org/10.1016/j.msea.2008.10.02010.1016/j.msea.2008.10.020 ↗
14. Ning Y, Fu MW, Hou H, Yao Z, Guo H (2011) Hot deformation behavior of Ti–5.0Al– 2.40Sn–2.02Zr–3.86Mo–3.91Cr alloy with an initial lamellar microstructure in the α+β phase field. Mater Sci Eng A 528(3):1812–1818. https://doi.org/10.1016/j.msea.2010.11.01910.1016/j.msea.2010.11.019 ↗
15. Wang KL, Lu SQ, Fu MW, Li X, Dong XJ (2010) Identification of the optimal (α+β) forging process parameters of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si based on processing-maps. Mater Sci Eng A 527(27–28):7279–7285. https://doi.org/10.1016/j.msea.2010.08.03110.1016/j.msea.2010.08.031 ↗
16. Li X, Lu S, Wang K, Fu MW, Cao C (2013) Analysis and comparison of the instability regimes in the processing maps generated using different instability criteria for Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy. Mater Sci Eng A 576:259–266. https://doi.org/10.1016/j.msea.2013.03.08710.1016/j.msea.2013.03.087 ↗
17. Ma X, Zeng W, Sun Y, Zhao Y, Wang S, Zhou Y (2010) A comparative study of various flow instability criteria in processing map. Rare met mater Eng 39(5):756–761. https://doi.org/10.1016/S1875-5372(10)60096-310.1016/S1875-5372(10)60096-3 ↗
18. Zhou G, Ding H, Cao F, Han Y, Zhang B (2012) Flow instability criteria in processing map of superalloy GH79. Trans nonferrous met Soc China 22:1575–1581. https://doi.org/10.1016/S1003-6326(11)61358-710.1016/S1003-6326(11)61358-7 ↗
19. Wu F, Xu W, Jin X, Zhong X, Wan X, Shan D, Guo B (2017) Study on hot deformation behavior and microstructure evolution of Ti-55 high-temperature titanium alloy. Met 7:1–17. https://doi.org/10.3390/met708031910.3390/met7080319 ↗
20. Yang Y, Liu L, Zhai T, Zhao C, Yu H, Li Q (2019) Formability of a HSAS based on hot processing maps and texture analyses. Mater res express 6:1–11. https://doi.org/10.1088/2053-1591/ab14ab10.1088/2053-1591/ab14ab ↗
21. Lypchanskyi O, Zyguła K, Śleboda T, Wojtaszek M, Łukaszek-Sołek A (2018) Characterization of Ti-6Al-2Sn-4Zr-6Mo alloy flow behaviour using Malas’s stability criterion. IOP Conf Ser: Mater Sci Eng 461:1–6. https://doi.org/10.1088/1757-899X/461/1/01204810.1088/1757-899X/461/1/012048 ↗
22. Ma X, Zeng WD, Wang KX, Lai Y, Zhou Y (2012) The investigation on the unstable flow behavior of Ti17 alloy in α+β phase field using processing map. Mater Sci Eng A 550:131–137. https://doi.org/10.1016/j.msea.2012.04.04510.1016/j.msea.2012.04.045 ↗
23. Prasad YVRK, Rao KP (2005) Processing maps and rate controlling mechanisms of hot deformation of electrolytic tough pitch copper in the temperature range 300-950 °C. Mater Sci Eng A 391(1–2):141–150. https://doi.org/10.1016/j.msea.2004.08.04910.1016/j.msea.2004.08.049 ↗
24. Liu J, Cui Z, Li C (2008) Analysis of metal workability by integration of FEM and 3-D processing maps. J Mater Process Technol 205(1):497–505. https://doi.org/10.1016/j.jmatprotec.2007.11.30810.1016/j.jmatprotec.2007.11.308 ↗
25. Prasad YVRK (2003) Processing maps: a status report. J Mater Eng Perform 12(6):638–645. https://doi.org/10.1361/10599490332269242010.1361/105994903322692420 ↗
26. Prasad YVRK, Sasidhara S (1997) Hot working guide: a compendium of processing maps. ASM International
27. Chen H, Liu X, Liu G, Tang X, Luo J, Feng Y, Li J, Fu H (2016) Hot deformation behavior and processing map of Ti-6Al-3Nb-2Zr-1Mo titanium alloy. Rare Metal Mater and Eng 45(4):901–906. https://doi.org/10.1016/S1875-5372(16)30097-210.1016/S1875-5372(16)30097-2 ↗
28. Wang K, Zeng W, Zhao Y, Lai Y, Zhou Y (2010) Hot working of Ti-17 titanium alloy with lamellar starting structure using 3-D processing maps. J Mater Sci 45(21):5883–5891. https://doi.org/10.1007/s10853-010-4667-110.1007/s10853-010-4667-1 ↗
29. Du Z, Jiang S, Zhang K (2015) The hot deformation behavior and processing map of Ti–47.5Al–Cr–V alloy. Mater Des 86:464–473. https://doi.org/10.1016/j.matdes.2015.07.02710.1016/j.matdes.2015.07.027 ↗
30. Sieniawski J, Motyka M (2007) Superplasticity in titanium alloys. J Achiev Mater Manuf Eng 24(1):123–130
31. Wojtaszek M, Śleboda T (2014) Design and verification of thermomechanical parameters of P/M Ti6Al4V alloy forging. J Alloys Compd 615:546–550. https://doi.org/10.1016/j.jallcom.2014.01.16110.1016/j.jallcom.2014.01.161 ↗