Improving geometrical accuracy for flanging by incremental sheet metal forming

Incremental Sheet Forming (ISF) is a manufacturing technology for individualized and small batch production. Among the opportunities this technology provides there is the possibility of a short ramp-up time and to cover the whole production chain of sheet metal parts by using a single reconfigurable machine set-up. Since recent developments proved that manufacturing of industrial parts is feasible, finishing operations such as flanging and trimming gain importance, which are an integral part of manufacturing process chains of many sheet metal parts. This paper analyses the technological capabilities of performing flanging operations by ISF. Due to the localized forming zone and the absence of surrounding clamping devices, ISF exhibits a different material flow than conventional flanging processes. In this paper, the influence of the tool path characteristics, the flange length as well as the flange radius is analysed in order to establish a process window and to compare it to the process limits of conventional flanging operations. Since geometrical deviations occur when flanging operations are performed by ISF, a new adaptive blank holder is developed, which acts in the vicinity of the forming tool and reduces unwanted deformation outside the primary forming zone. The experimental results show the benefits of the adaptive blank holder with respect to geometric accuracy. The established process window and the adaptive blank holder hence contribute to the applicability of incremental flanging operations, such that ISF can be used for all forming and flanging operations along the process chain.