FE-model for Titanium alloy (Ti-6Al-4V) cutting based on the identification of limiting shear stress at tool-chip interface
Source abstract
Abstract
Modeling of metal cutting has proved to be particularly complex, especially for tool-chip interface. The present work is mainly aimed to investigate the limiting shear stress at this interface in the case of Titanium alloy (Ti-6Al-4V) dry cutting based on a FE-model. It is first shown that the surface limiting shear stress was linked to the contact pressure and the coefficient of friction (CoF). A relationship between CoF and the limiting shear stress was given, and the effect of the temperature on the limiting shear stress was also considered. After that, an orthogonal cutting model was developed with an improved friction model through the user subroutine VFRIC in Abaqus/Explicit software. The numerical results obtained were compared with experimental data gathered from literature and a good overall agreement was found. Finally, the effects of cutting speed, CoF and tool-rake angle on chip morphologies were analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Adhesion, Friction, and Surface Interactions · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Arrazolaa PJ, Garaya A, Iriarte LM, Armendiaa M, Maryab S, Maîtrec FL (2009) Machinability of titanium alloys (Ti6Al4V and Ti555.3). J Mater Process Tech 209:2223–223010.1016/j.jmatprotec.2008.06.020 ↗
2. Puerta Velasquez JD, Bolle B, Chevrier P, Geandier G, Tidu A (2007) Metallurgical study on chips obtained by high speed machining of a Ti-6Al-4V alloy. Mater Sci Eng A 452–453:469–47410.1016/j.msea.2006.10.090 ↗
3. Ezugwu EO, Wang ZM (1997) Titanium alloys and their machinability—a review. J Mater Process Tech 68:262–27410.1016/S0924-0136(96)00030-1 ↗
4. Hou ZB, Komanduri R (1995) On a thermo mechanical model of shear instability in machining. CIRP Ann—Manuf Tech 44(1):69–7310.1016/S0007-8506(07)62277-X ↗
5. Umbrello D (2008) Finite element simulation of conventional and high speed machining of Ti6Al4V alloy. J Mater Process Tech 196:79–8710.1016/j.jmatprotec.2007.05.007 ↗
6. Childs THC (2006) Friction modelling in metal cutting. Wear 260(3):310–31810.1016/j.wear.2005.01.052 ↗
7. Bonnet C, Valiorgue F, Rech J, Hamdi H (2008) Identification of a friction model-Application to the context of dry cutting of an AISI 316L austenitic stainless steel with a TiN coated carbide tool. Int J Mach Tools & Manuf 48:1211–122310.1016/j.ijmachtools.2008.03.011 ↗
8. Mabrouki T, Rigal JF (2006) A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning. J Mater Process Tech 176:214–22110.1016/j.jmatprotec.2006.03.159 ↗
9. Jiang H, Shivpuri R (2004) Prediction of chip morphology and segmentation during the machining of titanium alloys. J Mater Process Tech 150:124–13310.1016/j.jmatprotec.2004.01.028 ↗
10. Subbiah S, Melkote SN (2008) Effect of finite edge radius on ductile fracture ahead of the cutting tool edge in micro-cutting of Al2024T3. Mater Sci Eng A 474:283–30010.1016/j.msea.2007.04.116 ↗
11. Zorev NN (1963) Inter-relationship between shear processes occurring along tool face and shear plane in metal cutting. Int Res Prod Eng ASME, pp 42–49
12. Johnson GR, Cook WH (1983) A constitutive model and data for metals subject to large strains, high strain rates and high temperatures. Proc. of the 7th international symposium on ballistics, the Hague, pp 31–48
13. Lesuer DR (2000) Experiment investigations of material models for Ti-6Al-4V Titanium and 2024-T3 Aluminum. Technical Report10.2172/11977 ↗
14. http://www.matweb.com/ . Accessed 25 August 2008
15. Calamaz M, Coupard D, Girot F (2008) A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V. Int J Mach Tools Manuf 48:275–28810.1016/j.ijmachtools.2007.10.014 ↗
16. Hillerborg A, Modeer M, Petersson PE (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cem Concr Res 6:773–78210.1016/0008-8846(76)90007-7 ↗
17. H.K.S, Abaqus/Explicit theory and user manuals, Version 6.8.2. Accessed August 8, 2008
18. Haglund AJ, Kishawy HA, Rogers RJ (2008) An exploration of friction models for the chip-tool interface using an Arbitrary Lagrangian-Eulerian finite element model. Wear 265:452–46010.1016/j.wear.2007.11.025 ↗
19. Shi GQ, Deng XM, Shet C (2002) A finite element study of the effect of friction in orthogonal metal cutting. Fin Elem Anal Des 38:863–88310.1016/S0168-874X(01)00110-X ↗
20. Liu CR, Guo YB (2000) Finite element analysis of the effect of sequential cuts and tool-chip friction on residual stress in a machined layer. Int J Mech Sci 42:1069–108610.1016/S0020-7403(99)00042-9 ↗
21. Kishawy HA, Rogers RJ, Balihodzic N (2000) A numerical investigation of the chip tool interface in orthogonal machining. Int J Mech Sci 5:379–414
22. Johnson KL (1985) Contact mechanics. Cambridge University Press, Cambridge10.1017/CBO9781139171731 ↗
23. Komanduri R, Hou ZB (2001) On thermoplastic shear instability in the machining of a titanium alloy (Ti-6Al-4V). Metal Mater trans 33:2995–301010.1007/s11661-002-0284-1 ↗
24. Pirondi A, Bonora N (2003) Modeling ductile damage under fully reversed cycling. Comput Mater Sci 26:129–14110.1016/S0927-0256(02)00411-1 ↗
25. Vyas A, Shaw MC (1999) Mechanics of sawtooth chip formation in metal cutting. Trans ASME J Manuf Sci Eng 121:163–17210.1115/1.2831200 ↗
26. Rech J, Calvez CL, Dessoly M (2004) A new approach for the characterization of machinability—application to steels for plastic injection molds. J Mater Process Tech 152:66–7010.1016/j.jmatprotec.2004.03.010 ↗
27. Luttervelt CAV, Pekelharing AJ (1977) The split shear zone—mechanism of chip segmentation. Ann CIRP 25(1):33–37
28. Sun S, Brandt M, Dargusch MS (2009) Characteristics of cutting forces and chip formation in machining of titanium alloys. Int J Mach Tools Manuf 49(7–8):561–56810.1016/j.ijmachtools.2009.02.008 ↗
29. Barry J, Byrne G (2001) Study on acoustic emission in machining hardened steels, Part 1: acoustic emission during saw-tooth chip formation. Proc Inst Mech Eng Part B: J Eng Manuf 215:1549–155910.1243/0954405011519457 ↗