Modeling of localization and fracture phenomena in strain and stress space for sheet metal forming
Source abstract
Abstract
In this study, a model based on a strain localization level to overcome the shortcomings of the well-established Forming Limit Diagram (FLD) in predicting the physical phenomenon of necking is introduced. An optical measurement system was used to capture the strain history of the Nakazima experiment until rupture occurred. In order to measure the fracture strain more accurately, a further method is introduced, which is based on the microscopic measurements of ruptured regions. This model is validated using a 3-point bending test. The results show the ability of the method to predict failure under bending conditions as well. Additionally, failure is investigated based on the pressure sensitivity and the Lode dependency. The results show that the triaxiality at the failure point is independent of the loading path.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · High-Velocity Impact and Material Behavior · Structural Integrity and Reliability Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Bai Y, Wierzbicki T (2008) A new model of metal plasticity and fracture with pressure and Lode dependence. Int J Plast 24:1071–109610.1016/j.ijplas.2007.09.004 ↗
2. Bao Y, Wierzbicki T (2004) On fracture locus in the equivalent strain and stress triaxiality space. Int J Mech Sci 46:81–9810.1016/j.ijmecsci.2004.02.006 ↗
3. Barlat F, Brem JC, Yoon JW, Chung K, Dick R, Choi SH, Pourboghrat F, Chu E, Lege DJ (2003) Plane stress yield function for aluminum alloy sheets - part I: theory. Int J Plast 19: 1297–131910.1016/S0749-6419(02)00019-0 ↗
4. Brozzo P, Deluca B, Rendina R (1972) A new method for the prediction of formability in metal sheet, sheet metal forming and formability. In: Proceedings of the 7th Biennial Conference of the IDDRG, pp 161–166
5. DIN EN ISO 12004-2, 2009 Metallic materials - sheet and strip - determination of forming-limit curves - part 2: Determination of forming-limit curves in the laboratory
6. German Association of the Automotive (2010) Plate bending test for metallic materials
7. Goodwin GM (1968) Application of strain analysis to sheet metal forming problems in the press shop. Soc Automot Eng 680093:380–387
8. Gorji M, Berisha B, Hora P, Timm J, Wiegand K, Selig M, Müller E (2014) Combined instability and crack failure criteria for prediction of multilayer aluminum material behavior. In: FLC 2014 Workshop, Zurich, Switzerland
9. Hasek V (1978) Research and theoretical description concerning the influences on the FLDs (in german). Blech/Rohre/Profile 25:213–220, 285–292, 493–499, 617–627
10. Hecker SS (1972) A simple forming limit curve technique and results on aluminum alloys. In: IDDRG1972, Amsterdam, Netherland, pp 51–58
11. Hora P, Tong L (1994) Prediction methods for ductile sheet metal failure using FE-simulation. In: Proceedings of the IDDRG. Lisbon, Portugal, pp 363–375
12. Hora P, Tong L, Reissner J (1996) A prediction method for ductile sheet metal failure in FE-simulation. In: Numisheet 96 -3rd International Conference: Numerical Simulation of 3-D Sheet Metal Forming Processes, Dearborn, USA, pp 252–256
13. Hora P, Berisha B, Gorji M, Manopulo N (2012) A generalized approach for the prediction of necking and rupture phenomena in the sheet metal forming. In: IDDRG2012, Mumbai, India, pp 79–93
14. Hotz W, Merklein M, Kuppert A, Friebe H, Möller T, Klein M (2012) Time dependent FLC determination - comparison of different algorithms to detect the onset of unstable necking before fracture. In: IDDRG 2010, Mumbai, India, pp 258–264
15. Keeler SP (1961) Plastic instability and fracture in sheet stretched over rigid punches. PhD thesis. Massachusetts Institute of Technology, Boston
16. Keeler SP (1965) Determination of forming limits in automotive stampings. SAE Tech Pap 65053510.4271/650535 ↗
17. Lou Y, Huh H (2013) Prediction of ductile fracture for advanced high strength steel with a new criterion: Experiments and simulation. J Mater Process Technol 213:1284–130210.1016/j.jmatprotec.2013.03.001 ↗
18. Marciniak Z (1965) Stability of plastic shells under tension with kinematic boundary condition. Archiwum Mechaniki Stosorwanej 17:577–592
19. Marciniak Z, Kuczynski K, Pokota T (1973) Influence of the plastic properties of a material on the forming limit diagram for sheet metal in tension. Int J Mech Sci 15:789–80010.1016/0020-7403(73)90068-4 ↗
20. Mattei L, Guiglionda DDG, Klöcker H, Driver J (2013) Strain localization and damage mechanisms during bending of AA6016 sheet. Mater Sci Eng A 559:812–82110.1016/j.msea.2012.09.028 ↗
21. Merklein M, Kuppert A, Geiger M (2010a) Time dependent determination of forming limit diagrams. CIRP Ann Manuf Technol 59:295–29810.1016/j.cirp.2010.03.001 ↗
22. Merklein M, Kuppert A, Mütze S, Geffert A (2010b) New time dependent method for determination of forming limit curves applied to SZBS800. In: IDDRG 2010, Graz, Austria, pp 489–498
23. Nakazima K, Kikuuma T, Hasuka K (1971) Study on the formability of steel sheets. Yawata Tech Rep 284:678–680
24. Olsen T (1920) Machines for ductility testing. Proc Am Soc Test Mater:398–403
25. Schleich R, Sindel M, Liewald M (2008) Material characterisation for aluminium sheet forming processes in automotive industry. In: New Developments in Sheet Metal Forming Technology, Stuttgart, Germany
26. Schleich R, Sindel M, Liewald M (2009) Investigation on the effect of curvature on forming limit prediction for aluminium sheet alloys. Int J Mater Form 2:69–7410.1007/s12289-009-0394-z ↗
27. Selcuk A, Rawlings RD (1991) A cantilever-type bend test technique for formability analysis of strip/plate metals. J Test Eval 19:349–35810.1520/JTE12586J ↗
28. Volk W, Hora P (2010) New algorithm for a robust user-independent evaluation of beginning instability for the experimental FLC determination. Int J Mater Form 4:339–34610.1007/s12289-010-1012-9 ↗
29. Wierzbicki T, Bao Y, Lee YW, Bai Y (2005) Calibration and evaluation of seven fracture models. Int J Mech Sci 47:719–74310.1016/j.ijmecsci.2005.03.003 ↗
30. Yoon JW, Barlat F, Dick RE, Chung K, Kang TJ (2004) Plane stress yield function for aluminum alloy sheets - part II: FE formulation and its implementation. Int J Plast 20:495–52210.1016/S0749-6419(03)00099-8 ↗