Hypoelastic, hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming
Source abstract
Abstract
The clear multi-scale structure of composite textile reinforcements leads to develop continuous and discrete approaches for their forming simulations. In this paper two continuous modelling respectively based on a hypoelastic and hyperelastic constitutive model are presented. A discrete approach is also considered in which each yarn is modelled by shell finite elements and where the contact with friction and possible sliding between the yarns are taken into account. Finally the semi-discrete approach is presented in which the shell finite element interpolation involves continuity of the displacement field but where the internal virtual work is obtained as the sum of tension, in-plane shear and bending ones of all the woven unit cells within the element. The advantages and drawbacks of the different approaches are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis and Optimization · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Advani SG (1994) Flow and rheology in polymeric composites manufacturing. Elsevier, Amsterdam
2. Saouab A, Bréard J, Lory P, Gardarein B, Bouquet G (2001) Injection simulations of thick composite parts manufactured by the RTM process. Compos Sci Technol 61:445–45110.1016/S0266-3538(00)00126-3 ↗
3. Mouritz AP, Bannister MK, Falzon PJ, Leong KH (1999) Review of applications for advanced three-dimensional fibre textile composites. Compos Part A 30:1445–146110.1016/S1359-835X(99)00034-2 ↗
4. de Luycker E, Morestin F, Boisse P, Marsal D (2009) Simulation of 3D interlock composite preforming. Compos Struct 88:615–62310.1016/j.compstruct.2008.06.005 ↗
5. Tong L, Mouritz AP, Bannister MK (2002) 3D Fibre reinforced polymer composites. Elsevier Science, Oxford
6. Creech G, Pickett AK (2006) Meso-modelling of non-crimp fabric composites for coupled drape and failure analysis. J Mater Sci 41:6725–673610.1007/s10853-006-0213-6 ↗
7. Boisse P, Gasser A, Hagège B, Billoet JL (2005) Analysis of the mechanical behavior of woven fibrous material using virtual tests at the unit cell level. J Mater Sci 40:5955–596210.1007/s10853-005-5069-7 ↗
8. Dong L, Lekakou C, Bader MG (2001) Processing of composites: simulations of the draping of fabrics with updated material behaviour law. J Compos Mater 35:138–16310.1177/002199801772661975 ↗
9. Hagège B, Boisse P, Billoët JL (2005) Finite element analyses of knitted composite reinforcement at large strain. European Journal of Computational Mechanics 14:767–776
10. Peng X, Cao J (2005) A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics. Compos Part A 36:859–87410.1016/j.compositesa.2004.08.008 ↗
11. Rogers TG (1989) Rheological characterisation of anisotropic materials. Composites 20:21–2710.1016/0010-4361(89)90677-0 ↗
12. Spencer AJM (2000) Theory of fabric-reinforced viscous fluids. Compos Part A 31:1311–132110.1016/S1359-835X(00)00006-3 ↗
13. ten Thije RHW, Akkerman R, Huétink J (2007) Large deformation simulation of anisotropic material using an updated Lagrangian finite element method. Comput Methods Appl Mech Eng 196:3141–315010.1016/j.cma.2007.02.010 ↗
14. Yu WR, Pourboghrata F, Chungb K, Zampaloni M, Kang TJ (2002) Non-orthogonal constitutive equation for woven fabric reinforced thermoplastic composites. Compos Part A 33:1095–110510.1016/S1359-835X(02)00053-2 ↗
15. Ben Boukaber B, Haussy G, Ganghoffer JF (2007) Discrete models of woven structures. Macroscopic approach. Compos Part B 38:498–50510.1016/j.compositesb.2006.01.007 ↗
16. Duhovic M, Bhattacharyya D (2006) Simulating the deformation mechanisms of knitted fabric composites. Compos Part A 37:1897–191510.1016/j.compositesa.2005.12.029 ↗
17. Pickett AK, Creech G, de Luca P (2005) Simplified and advanced simulation methods for prediction of fabric draping. European Journal of Computational Mechanics 14:677–691
18. Zhou G, Sun X, Wang Y (2004) Multi-chain digital element analysis in textile mechanics. Compos Sci Technol 64:239–24410.1016/S0266-3538(03)00258-6 ↗
19. Durville D (2005) Numerical simulation of entangled materials mechanical properties. J Mater Sci 40:5941–594810.1007/s10853-005-5061-2 ↗
20. Durville D (2008) A finite element approach of the behaviour of woven materials at microscopic scale—11th Euromech-Mecamat conference—Mechanics of microstructured solids: cellular materials, fiber reinforced solids and soft tissues, Torino, Italia. arXiv:0804.2952v1 [cond-mat.soft]10.1007/978-3-642-00911-2_5 ↗
21. Miao Y, Zhou E, Wang Y, Cheeseman BA (2008) Mechanics of textile composites: micro-geometry. Compos Sci Technol 68:1671–167810.1016/j.compscitech.2008.02.018 ↗
22. Truesdell C (1955) Hypo-elasticity. J Ration Mech Anal 4:83–133
23. Xiao H, Bruhns OT, Meyers A (1998) On objective corotational rates and their defining spin tensors. Int J Solids Struct 35:4001–401410.1016/S0020-7683(97)00267-9 ↗
24. Belytschko T, Liu WK, Moran B (2000) Nonlinear finite elements for continua and structures. Wiley, Chichester
25. Crisfield MA (1997) Non-linear finite element analysis of solids and structures. Wiley, Chichester
26. Badel P, Gauthier S, Vidal-Sallé E, Boisse P (2008) Rate constitutive equations for computational analyses of textile composite reinforcement mechanical behaviour during forming. Compos Part A. doi: 10.1016/j.compositesa.2008.04.015
27. Hughes TJR, Winget J (1980) Finite rotation effects in numerical integration of rate constitutive equations arising in large deformation analysis. Int J Numer Methods Eng 15:1862–186710.1002/nme.1620151210 ↗
28. Khan MA, Mabrouki T, Boisse P (2009) Numerical and experimental forming analysis of woven Composites with double dome benchmark. Proceedings Esaform 2009, Springer10.1007/s12289-009-0549-y ↗
29. Khan MA (2009) Numerical and experimental analyses of woven composite reinforcement draping using a hypoelastic behaviour. Ph.D. Thesis, INSA Lyon
30. Woven composites benchmark forum. http://www.wovencomposites.org/ . Accessed 11 May 2009
31. Cao J, Akkerman R, Boisse P, Chen J et al (2008) Characterization of mechanical behavior of woven fabrics: experimental methods and benchmark results. Compos Part A 39:1037–105310.1016/j.compositesa.2008.02.016 ↗
32. Lomov SV, Boisse P, De Luycker E, Morestin F, Vanclooster K, Vandepitte D, Verpoest I, Willems A (2008) Full-field strain measurements in textile deformability studies. Compos Part A 39:1232–124410.1016/j.compositesa.2007.09.014 ↗
33. Buet-Gautier K, Boisse P (2001) Experimental analysis and modeling of biaxial mechanical behavior of woven composite reinforcements. Exp Mech 41:260–26910.1007/BF02323143 ↗
34. Spencer AJM (1984) Continuum theory of the mechanics of fibres-reinforced composites. Springer-Verlag, New York10.1007/978-3-7091-4336-0 ↗
35. Basar Y, Weichert D (2000) Nonlinear continuum mechanics of solids. Springer, Berlin10.1007/978-3-662-04299-1 ↗
36. Ogden RW (1984) Non-linear elastic deformations. Wiley, New York
37. Truesdell C, Noll W (1965) The nonlinear field theories of mechanics. Edition Handbuch der Physik Vol. III. Spinger, Berlin
38. Aimène Y, Vidal-Sallé E, Hagège B, Sidoroff F, Boisse P (2009) A hyperelastic approach for composite reinforcement large deformation analysis. J Compos Mater. doi: 10.1177/0021998309345348
39. Daniel JL, Soulat D, Dumont F, Zouari B, Boisse P, Long AC (2003) Forming simulation of very unbalanced woven composite reinforcements. Int J Form Process 6:465–48010.3166/ijfp.6.465-480 ↗
40. Dumont F (2003) Expérimentations et modèles de comportement de renforts de composites tissés. Ph.D. Thesis, Paris VI University
41. Dridi S (2009) Modélisation du comportement mécanique des textiles par des lois hyperélastiques. Ph.D. Thesis, University of Monastir and INSA Lyon, to appear
42. Badel P, Vidal-Sallé E, Maire E, Boisse P (2009) Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale. Compos Sci Technol 68:2433–244010.1016/j.compscitech.2008.04.038 ↗
43. Grave G, Birkefeld K, von Reden T, Drechsler K, Kyosev Y, Rathjens A (2009) Simulation of 3D overbraiding—solutions and challenges. Second World Conference on 3D Fabrics and their Applications, Greenville
44. Nilakantan G, Keefe M, Gillespie JW, Bogetti TA (2009) Simulating the impact of multi-layer fabric targets using a multi-scale model and the finite element method. Recent advances in textile composites. Proceedings of the 9th International Conference on Textile Composites—TEXCOMP9), DEStech Publications, Inc., 506–515
45. Sapozhnikov SB, Forental MV, Dolganina NY (2007) Improved methodology for ballistic limit and blunt trauma estimation for use with hybrid metal/textile body armor. Proceedings of the Conference Finite element modelling of textiles and textile composites (CD ROM), St-Petersburg
46. Boisse P, Zouari B, Daniel JL (2006) Importance of in-plane shear rigidity in finite element analyses of woven fabric composite preforming. Compos Part A 37:2201–221210.1016/j.compositesa.2005.09.018 ↗
47. Hamila N, Boisse P, Sabourin F, Brunet M (2009) A semi-discrete shell finite element for textile composite reinforcement forming simulation. Int J Numer Methods Eng 79(12):1443–146610.1002/nme.2625 ↗
48. Prodromou AG, Chen J (1997) On the relationship between shear angle and wrinkling of textile composite preforms. Compos Part A 28:491–50310.1016/S1359-835X(96)00150-9 ↗
49. de Bilbao E, Soulat D, Hivet G, Launay J, Gasser A (2008) Bending test of composite reinforcements. International Journal of Material Forming. doi: 10.1007/s12289-008-0265-z
50. Launay J, Hivet G, Duong AV, Boisse P (2008) Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcements. Compos Sci Technol 68:506–51510.1016/j.compscitech.2007.06.021 ↗
51. Lomov SV, Verpoest I (2006) Model of shear of woven fabric and parametric description of shear resistance of glass woven reinforcements. Compos Sci Technol 66:919–93310.1016/j.compscitech.2005.08.010 ↗
52. Sabourin F, Brunet M (1995) Analyses of plates and shells with a simplified 3 node triangular element. Thin-walled Struct 21:238–25110.1016/0263-8231(94)00001-G ↗
53. Onate E, Zarate F (2000) Rotation-free triangular plate and shell elements. Int Numer Methods Eng 47:557–60310.1002/(SICI)1097-0207(20000110/30)47:1/3<557::AID-NME784>3.0.CO;2-9 ↗
54. Allaoui S, Boisse P, Chatel S, Hamila N, Hivet G, Soulat D (2009) Experimental and numerical analysis of a woven reinforcement forming process. Compos Part B, submitted
55. Hamila N, Boisse P, Chatel S (2008) Finite element simulation of composite reinforcement draping using a three node semi discrete triangle. International Journal of Material Forming 1:867–870. doi: 10.1007/s12289-008-0-273-z10.1007/s12289-008-0273-z ↗