Evaluating residual stresses in metal additive manufacturing: a comprehensive review of detection methods, impact, and mitigation strategies
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Mercelis P, Kruth JP (2006) Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyp J 12(5):254–265. https://doi.org/10.1108/13552540610707013.10.1108/13552540610707013 ↗
2. Brinksmeier E, Cammett JT, Konig W, Leskovar P, Peters J, Tonshoff HK (1982) Residual stresses-measurement and causes in machining processes. Ann CIRP 31(2):491–510. https://doi.org/10.1016/S0007-8506(07)60172-3.10.1016/S0007-8506(07)60172-3 ↗
3. Rossini NS, Dassisti M, Benyounis KY, Olabi AG (2012) Methods of measuring residual stresses in components. Mater Des 35:572–588. https://doi.org/10.1016/j.matdes.2011.08.022.10.1016/j.matdes.2011.08.022 ↗
4. Kruth JP, Froyen L, Van Vaerenbergh J, Mercelis P, Rombouts M, Lauwers B (2004) Selective laser melting of iron-based powder. J Mater Process Technol 149(1–3):616–622. https://doi.org/10.1016/j.jmatprotec.2003.11.051.10.1016/j.jmatprotec.2003.11.051 ↗
5. Kruth JP, Deckers J, Yasa E, Wauthle R (2012) Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method. Proc Inst Mech Eng B J Eng Manuf 226(6):1–12. https://doi.org/10.1177/0954405412437085.10.1177/0954405412437085 ↗
6. Zyl I, Yadroitsava I, Yadroitsev I (2016) Residual stress in Ti6Al4V objects produced by direct metal laser sintering. South Afr J Ind Eng 27(4):134–141. https://hdl.handle.net/10520/EJC199638
7. Norton JH, Rosenthal D (1944) Stress measurement by x-ray diffraction. Proc Soc Exp Stress Anal 1(2):73–76
8. Norton JH, Rosenthal D (1944) Application of the x-ray method of stress measurement to problems involving residual stress in metals. Proc Soc Exp Stress Anal 1(2):81–90
9. Wu AS, Brown DW, Kumar M, Gallegos GF, King WE (2014) An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel. Metall Mater Trans A 45(13):6260–6270. https://doi.org/10.1007/s11661-014-2549-x10.1007/s11661-014-2549-x ↗
10. Chen M, Xing S, Liu H, Jiang C, Zhan K, Ji V (2020) Determination of surface mechanical property and residual stress stability for shot-peened SAF2507 duplex stainless steel by in situ X-ray diffraction stress analysis. J Mater Res Technol 9(4):7644–7654. https://doi.org/10.1016/j.jmrt.2020.05.028.10.1016/j.jmrt.2020.05.028 ↗
11. Zhang Z, Feng Y, Tan Q, Zou J, Li J, Zhou X, Wang Y (2019) Residual stress distribution in Ni-based superalloy turbine discs during fabrication evaluated by neutron/X-ray diffraction measurement and thermomechanical simulation. Mater Design 166:107603. https://doi.org/10.1016/j.matdes.2019.107603.10.1016/j.matdes.2019.107603 ↗
12. Swain D, Sharma A, Selvan SK, Thomas BP, Philip J (2019) Residual stress measurement on 3-D printed blocks of Ti-6Al-4V using incremental hole drilling technique. Procedia Struct Integr 14:337–344. https://doi.org/10.1016/j.prostr.2019.05.042.10.1016/j.prostr.2019.05.042 ↗
13. Zhan Y, Liu C, Zhang J, Mo G, Liu C, 762 (2019) 138093. https://doi.org/10.1016/j.msea.2019.13809310.1016/j.msea.2019.138093 ↗
14. Liu C, Lin C, Wang J, Wang J, Yan L, Luo Y, Yang M (2020) Residual stress distributions in thick specimens excavated from a large circular wire + arc additive manufacturing mockup. J Manuf Process 56:474–481. https://doi.org/10.1016/j.jmapro.2020.05.007.10.1016/j.jmapro.2020.05.007 ↗
15. De Oliveira AR, de Oliveira VF, Teixeira JC, Conte D, E. G (2021) Investigation of the build orientation effect on magnetic properties and Barkhausen noise of additively manufactured maraging steel 300. 38:101827. Additive Manufacturinghttps://doi.org/10.1016/j.addma.2020.101827.10.1016/j.addma.2020.101827 ↗
16. Rizwee M, Kumar D, Kumar R (2024) Computational analysis of the Mechanical Compression of Additive Manufactured Lattice structures: a Numerical Study. Advances in Industrial Engineering in the industry 4.0 era. CRC, pp 147–15610.1201/9781003486244-12 ↗
17. Olabi AG, Hashmi MSJ (1996) Stress relief procedures for low carbon steel (1020) welded components. J Mater Process Technol 56:552–562. https://doi.org/10.1016/0924-0136(95)01869-7.10.1016/0924-0136(95)01869-7 ↗
18. Kandil FA, Lord JD (2001) A review of residual stress measurement methods, a guide to technique selection. NPL Report MAT(A)04. http://eprintspublications.npl.co.uk/id/eprint/1873
19. Milbradt KP (1951) Ring-method determination of residual stresses. Proc SESA 9(1):63–74
20. Kiel S (1992) Experimental determination of residual stresses with the ring-core method and an online measuring system. Exp Tech 16(5):17–24. https://doi.org/10.1111/j.1747-1567.1992.tb00701.x10.1111/j.1747-1567.1992.tb00701.x ↗
21. Kim S-H, Kim J-B, Lee W-J (2009) Numerical prediction and neutron diffraction measurement of the residual stresses for a modified 9Cr– 1Mo steel weld. J Mater Process Technol 209(8):3905–3913. https://doi.org/10.1016/j.jmatprotec.2008.09.012.10.1016/j.jmatprotec.2008.09.012 ↗
22. Paradowska A, Price JWH, Ibrahim R, Finlayson T (2005) A neutron diffraction of residual stress due to welding. J Mater Process Technol;164– 165:1099–1105. https://doi.org/10.1016/j.jmatprotec.2005.02.092.10.1016/j.jmatprotec.2005.02.092 ↗
23. Ajovalasit A, Petrucci G, Zuccarello B (1996) Determination of non-uniform residual stresses using the ring-core method. J Mater Process Technol 118(2):224–228. https://doi.org/10.1115/1.2804891.10.1115/1.2804891 ↗
24. Altpeter I, Dobmann G, Kröning M, Rabung M, Szielasko S (2009) Micro-magnetic evaluation of micro residual stresses of the IInd and IIIrd order. NDT&E Int 42:283–290. https://doi.org/10.1016/j.ndteint.2008.11.007.10.1016/j.ndteint.2008.11.007 ↗
25. Scholtes B (2007) Residual stress analysis of components with real geometries using the incremental hole-drilling technique and a differential evaluation method. Kassel university press GmbH
26. Vishay measurements group (2007) http://www.vishaypg.com/ (accessed March 1, 2011)
27. Lee HY, Nikbin KM, Dowd PO (2005) A generic approach for a linear fracture mechanics analysis of components containing residual stress. Int J Press Vess Pip 82:797–806. https://doi.org/10.1016/j.ijpvp.2005.05.001.10.1016/j.ijpvp.2005.05.001 ↗
28. Acevedo R, Sedlak P, Kolman R, Fredel M (2020) Residual stress analysis of additive manufacturing of metallic parts using ultrasonic waves: state of the art review. J Mater Res Technol 9(4):9457–9477. https://doi.org/10.1016/j.jmrt.2020.05.092.10.1016/j.jmrt.2020.05.092 ↗
29. Liu J, Zhu H, Xu W (2011) Analysis of residual stresses in thick aluminum friction stir welded butt joints. Mater Des 32(4):2000–2005. https://doi.org/10.1016/j.matdes.2010.11.062.10.1016/j.matdes.2010.11.062 ↗
30. Olabi AG, Hashmi MSJ (1995) The effect of post-weld heat treatment on mechanical properties and residual-stresses mapping in welded structural steel. J Mater Process Technol 55:117–122. https://doi.org/10.1016/0924-0136(95)01794-1.10.1016/0924-0136(95)01794-1 ↗
31. Shadley JR, Rybicki EF, Shealy WS (1987) Application guidelines for the parting out in a through-thickness residual stress measurement procedure. Strain 23:157–166. https://doi.org/10.1111/j.1475-1305.1987.tb00640.x.10.1111/j.1475-1305.1987.tb00640.x ↗
32. Tebedge N, Alpsten G, Tall L (1973) Residual-stress measurement by the sectioning method. Exp Mech 13(2):88–96. https://doi.org/10.1007/BF0232238910.1007/BF02322389 ↗
33. Mazzolani FM (1995) Aluminum alloy structures. 2nd ed. E&FN Spon, An imprint of Chapman and Hal;, ISBN: 978-0419177708
34. Lagerqvist O, Olsson A (2001) Residual stresses in welded I-girders made of stainless steel and structural steel. In: Helsinki: Proceedings of the ninth nordic steel construction conference; pp. 737–744
35. Young B, Lui WM (2005) Behavior of Cold-formed high-strength stainless steel sections. J Struct Eng, ASCE;131(11):1738–45. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:11(1738)10.1061/(ASCE)0733- ↗
36. Olabi AG, Hashmi MSJ (1998) Effects of the stress-relief conditions on a martensite stainless-steel welded component. J Mater Process Technol 77:216–225. https://doi.org/10.1016/S0924-0136(97)00420-2.10.1016/S0924-0136(97)00420-2 ↗
37. Prime MB, Gonzales AR (2000) In: Proceedings of the sixth international conference on residual stresses. Oxford, UK: IOM Communications Ltd. pp. 617–24
38. Olabi AG, Casalino G, Benyounis KY, Rotondo A (2007) Minimisation of the residual stress in the heat affected zone by means of numerical methods. Mater Des 28:2295–2302. https://doi.org/10.1016/j.matdes.2006.08.005.10.1016/j.matdes.2006.08.005 ↗
39. Benyounis KY, Olabi AG, Abboud JH (2007) Assessment and minimization of the residual stress in dissimilar laser welding. Appl Mech Mater;7– 8:139–144. https://doi.org/10.4028/www.scientific.net/AMM.7-8.139.10.4028/www.scientific.net/AMM.7-8.139 ↗
40. Leggatt RH, Smith DJ, Smith SD, Faure F (1996) Development and experimental validation of the deep hole method for residual stress measurement. J Strain Anal 31(3):177–186. https://doi.org/10.1243/03093247V313177.10.1243/03093247V313177 ↗
41. DeWald AT, Hill MR (2003) Improved data reduction for the deep hole method of residual stress measurement. J Strain Anal 38(1):65–78. https://doi.org/10.1243/030932403762671908.10.1243/030932403762671908 ↗
42. Flaman MT, Herring GA (1985) Comparison of four hole-producing techniques for the center-hole residual-stress measurement method. Exp Tech 9:30–32. https://doi.org/10.1111/j.1747-1567.1985.tb02036.x10.1111/j.1747-1567.1985.tb02036.x ↗
43. Flaman MT, Herring GA (1986) Ultra-high-speed center-hole technique for difficult machining materials. Exp Tech 10:34–35. https://doi.org/10.1111/j.1747-1567.1986.tb01370.x.10.1111/j.1747-1567.1986.tb01370.x ↗
44. Zhang B, Dembinski L, Coddet C (2013) The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder. Mater Sci Eng A 584:21–31. https://doi.org/10.1016/j.msea.2013.06.055.10.1016/j.msea.2013.06.055 ↗
45. Venturi F, Taylor R (2023) Additive Manufacturing in the context of repeatability and reliability. J Mater Eng Perform 1–21. https://doi.org/10.1007/s11665-023-07897-310.1007/s11665-023-07897-3 ↗
46. Bartlett JL, Li X (2019) An overview of residual stresses in metal powder bed fusion. Addit Manuf 27:131–149. https://doi.org/10.1016/j.addma.2019.02.020.10.1016/j.addma.2019.02.020 ↗
47. Rizwee M, Kumar D, Hussain MM (2024) Enhancing the tribological characteristics of the Biocompatible Ti-6Al-4V Alloy via Heat Treatment: an experimental analysis. Tribol Int 110052. https://doi.org/10.1016/j.triboint.2024.11005210.1016/j.triboint.2024.110052 ↗
48. He B, Bi C, Li X, Wang W, Yang G (2023) Residual stresses and deformations of laser additive manufactured metal parts: a review. IntJ Mater Form 16(1):7. https://doi.org/10.1007/s12289-022-01729-w10.1007/s12289-022-01729-w ↗
49. Mukherjee T, Manvatkar V, De A, DebRoy T (2017) Mitigation of thermal distortion during additive manufacturing. Scr Mater 127:79–83. https://doi.org/10.1016/j.scriptamat.2016.09.001.10.1016/j.scriptamat.2016.09.001 ↗
50. Hussein A, Hao L, Yan C, Everson R (2013) Finite element simulation of the temperature and stress fields in single layers built without support in selective laser melting. Mater Des (1980–2015). 52:638–647. https://doi.org/10.1016/j.matdes.2013.05.070.10.1016/j.matdes.2013.05.070 ↗
51. Shiomi M, Osakada K, Nakamura K, Yamashita T, Abe F (2004) Residual stress within metallic model made by selective laser melting process. CIRP Ann Manuf Technol 53(1):195–198. https://doi.org/10.1016/S0007-8506(07)60677-5.10.1016/S0007-8506(07)60677-5 ↗
52. Loh L-E, Chua C-K, Yeong W-Y, Song J, Mapar M, Sing S-L et al (2015) Numerical investigation and an effective modeling on the selective laser melting (SLM) process with aluminium alloy 6061. Int J Heat Mass Transf 80:288–300. https://doi.org/10.1016/j.ijheatmasstransfer.2014.09.014.10.1016/j.ijheatmasstransfer.2014.09.014 ↗
53. Lu Y, Wu S, Gan Y, Huang T, Yang C, Junjie L, Lin J (2015) Study on the microstructure, mechanical property and residual stress of SLM inconel718 alloy manufactured by differing island scanning strategy. Opt Laser Technol. https://doi.org/10.1016/j.optlastec.2015.07.009. ;75197-20610.1016/j.optlastec.2015.07.009 ↗
54. Wu AS, Brown D, Kumar W, Gallegos M, King GF WE (2014) An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel. Metall Mater Trans A 1–11. https://doi.org/10.1007/s11661-014-2549-x10.1007/s11661-014-2549-x ↗
55. Sun L, Ren X, He J, Zhang Z (2021) Numerical investigation of a novel pattern for reducing residual stress in metal additive manufacturing. J Mater Sci Technol 67:11–22. https://doi.org/10.1016/j.jmst.2020.05.080.10.1016/j.jmst.2020.05.080 ↗
56. Wang L, Jiang X, Zhu Y, Zhu X, Sun J, Yan B (2018) An approach to predict the residual stress and distortion during the selective laser melting of AlSi10Mg parts. Int J Adv Manuf Technol 97:3535e46. https://doi.org/10.1007/s00170-018-2207-310.1007/s00170-018-2207-3 ↗
57. Withers PJ, Bhadeshia HK (2001) Residual stress overview. Part 2 nature and origins. Mater Sci Technol 17:366–375. https://doi.org/10.1179/02670830110151008710.1179/026708301101510087 ↗
58. Jayanath S, Achuthan A (2018) A computationally efficient finite element framework to simulate additive manufacturing processes. J Manuf Sci Eng 140:041009. https://doi.org/10.1115/1.4039093.10.1115/1.4039093 ↗
59. Abusalma H, Eisazadeh H, Hejripour F, Bunn J, Aidun DK (2022) Parametric study of residual stress formation in Wire and Arc Additive Manufacturing. J Manuf Process 75:863–876. https://doi.org/10.1016/j.jmapro.2022.01.043.10.1016/j.jmapro.2022.01.043 ↗
60. Promoppatum P, Yao SC (2020) Influence of scanning length and energy input on residual stress reduction in metal additive manufacturing: Numerical and experimental studies. J Manuf Process 49:247–259. https://doi.org/10.1016/j.jmapro.2019.11.020.10.1016/j.jmapro.2019.11.020 ↗
61. Han Q, Gao J, Han C, Zhang G, Li Y (2021) Experimental investigation on improving the deposition rate of gas metal arc-based additive manufacturing by auxiliary wire feeding method. Weld World 65:35–45. https://doi.org/10.1007/s40194-020-00994-010.1007/s40194-020-00994-0 ↗
62. Li R, Xiong J, Lei Y (2019) Investigation on thermal stress evolution induced by wire and arc additive manufacturing for circular thin-walled parts. J Manuf Process 40:59–67. https://doi.org/10.1016/j.jmapro.2019.03.006.10.1016/j.jmapro.2019.03.006 ↗
63. Jinoop AN, Paul CP, Bindra KS (2019) Laser-assisted directed energy deposition of nickel super alloys: a review. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 233(11), 2376–2400. https://doi.org/10.1177/146442071985265810.1177/1464420719852658 ↗
64. Barath Kumar MD, Manikandan M (2022) Assessment of process, parameters, residual stress mitigation, post treatments and finite element analysis simulations of wire arc additive manufacturing technique. Met Mater Int 28(1):54–111. https://doi.org/10.1007/s12540-021-01015-510.1007/s12540-021-01015-5 ↗
65. Fan D, Gao M, Li C, Huang J, Yu X (2022) Residual stress and microstructure properties by trailing cooling of argon gas of wire and arc additive manufacturing. J Manuf Process 77:32–39. https://doi.org/10.1016/j.jmapro.2022.03.007.10.1016/j.jmapro.2022.03.007 ↗
66. Romano S, Bru¨ ckner-Foit A, Brando A, Gumpinger J, Ghidini T, Beretta S (2018) Fatigue properties of AlSi10Mg obtained by additive manufacturing: defect-based modelling and prediction of fatigue strength. Eng Fract Mech 187:165e89. https://doi.org/10.1016/j.engfracmech.2017.11.002.10.1016/j.engfracmech.2017.11.002 ↗
67. Jing S, Zhang Y, Ke S (2016) The numerical simulation for effect of vibratory stress relief on titanium alloy Ti-6Al-4V fatigue life. https://doi.org/10.1007/978-981-10-2669-0_57. Springer Singapore10.1007/978-981-10-2669-0_57 ↗
68. Prando D, Brenna A, Diamanti MV, Beretta S, Bolzoni F, Ormellese M, Pedeferri M (2017) Corrosion of titanium: part 1: aggressive environments and main forms of degradation. J Appl Biomater Funct Mater 15(4):e291–e302. https://doi.org/10.5301/jabfm.500038710.5301/jabfm.5000387 ↗
69. Zhang J, Song B, Cai C, Zhang L, Shi Y (2022) Tailorable microstructure and mechanical properties of selective laser melted TiB/Ti–6Al–4V composite by heat treatment. Adv Powder Mater 1(2):100010. https://doi.org/10.1016/j.apmate.2021.10.001.10.1016/j.apmate.2021.10.001 ↗
70. Shi ZF, Guo HZ, Han JY, Yao ZK (2013) Microstructure and mechanical properties of TC21 titanium alloy after heat treatment. Trans Nonferrous Met Soc China 23(10):2882–2889. https://doi.org/10.1016/S1003-6326(13)62810-1.10.1016/S1003-6326(13)62810-1 ↗
71. Sui S, Chew Y, Hao Z, Weng F, Tan C, Du Z, Bi G (2022) Effect of cyclic heat treatment on microstructure and mechanical properties of laser aided additive manufacturing Ti–6Al–2Sn–4Zr–2Mo alloy. Adv Powder Mater 1(1):100002. https://doi.org/10.1016/j.apmate.2021.09.002.10.1016/j.apmate.2021.09.002 ↗
72. Wang C, Jiang C, Fei C, Zhao Y, Zhu K, Chai Z (2016) Effect of shot peening on the residual stresses and microstructure of tungsten cemented carbide. Mater Des 95:159e64. https://doi.org/10.1016/j.matdes.2016.01.10110.1016/j.matdes.2016.01.101 ↗
73. Paul R, Anand S, Gerner F (2014) Effect of thermal deformation on part errors in metal powder based additive manufacturing processes. J Manuf Sci Eng 136:31009. https://doi.org/10.1115/1.4026524.10.1115/1.4026524 ↗
74. Dunbar AJ, Denlinger ER, Heigel J, Michaleris P, Guerrier P, Martukanitz R et al (2016) Development of experimental method for in situ distortion and temperature measurements during the laser powder bed fusion additive manufacturing process. Additive Manuf 12:25–30. https://doi.org/10.1016/j.addma.2016.04.007.10.1016/j.addma.2016.04.007 ↗
75. Lai YB, Liu WJ, Zhao JB, Zhao YH, Wang FY, Han WC (2013) Experimental study on residual stress in titanium alloy laser additive manufacturing. Appl Mech Mater 431:20e6. https://doi.org/10.4028/www.scientific.net/AMM.431.2010.4028/www.scientific.net/AMM.431.20 ↗
76. Yadroitsev I, Yadroitsava I (2015) Evaluation of residual stress in stainless steel 316L and Ti6Al4V samples produced by selective laser melting. Virtual Phys Prototyp 10:67e76. https://doi.org/10.1080/17452759.2015.1026045.10.1080/17452759.2015.1026045 ↗
77. Parry L, Ashcroft IA, Wildman RD (2016) Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation. Additive Manuf 12:1–15. https://doi.org/10.1016/j.addma.2016.05.014.10.1016/j.addma.2016.05.014 ↗
78. LN C. (2017) An experimental investigation of residual stress development during selective laser melting of Ti-6Al-4V. http://rave.ohiolink.edu/etdc/view?acc_num=wright1515112797193544
79. Chen Q, Liang X, Hayduke D, Liu J, Cheng L, Oskin J et al (2019) An inherent strain based multiscale modeling framework for simulating part-scale residual deformation for direct metal laser sintering. https://doi.org/10.1016/j.addma.2019.05.021. Additive Manufacturing; 28:406 – 1810.1016/j.addma.2019.05.021 ↗
80. DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O.,… Zhang, W. (2018). Additive manufacturing of metallic components–process, structure and properties. Progress in Materials Science. 2018; 92, 112–224. https://doi.org/10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
81. Montevecchi F, Venturini G, Grossi N et al (2017) Finite element mesh coarsening for effective distortion prediction in wire arc additive manufacturing. Addit Manuf 18:145–155. https://doi.org/10.1016/j.addma.2017.10.010.10.1016/j.addma.2017.10.010 ↗
82. Xie D, Lv F, Zhao J et al (2021) Towards a comprehensive understanding of distortion in additive manufacturing based on assumption of constraining force. Virtual Phys Prototyp 16:85–97. https://doi.org/10.1080/17452759.2021.188187310.1080/17452759.2021.1881873 ↗
83. Prabhakar P, Sames W, Dehoff R et al (2015) Computational modeling of residual stress formation during the electron beam melting process for Inconel 718. Addit Manuf 7:83–91. https://doi.org/10.1016/j.addma.2015.03.00310.1016/j.addma.2015.03.003 ↗
84. Zhang Y, Zhang J (2017) Finite element simulation and experimental validation of dis- tortion and cracking failure phenomena in direct metal laser sintering fabricated component. Addit Manuf 16:49–57. https://doi.org/10.1016/j.addma.2017.05.00210.1016/j.addma.2017.05.002 ↗
85. Wen Y, Zhang B, Liu S et al (2020) A novel experimental method for in situ strain measurement during selective laser melting. Virtual Phys Prototyp 15(s1):83–95. https://doi.org/10.1080/17452759.2020.1842137.10.1080/17452759.2020.1842137 ↗
86. Wu A, Brown S, Donald W et al (2014) An experimental investigation into additive man- ufacturing-induced residual stresses in 316L stainless steel. Metall Mater Trans A 45(13):6260–6270. https://doi.org/10.1007/s11661-014-2549-x10.1007/s11661-014-2549-x ↗
87. Xiao Z, Chen C, Zhu H, Hu Z, Nagarajan B, Guo L et al (2020) Study of residual stress in selective laser melting of Ti6Al4V. Mater Des 193:108846. https://doi.org/10.1016/j.matdes.2020.108846.10.1016/j.matdes.2020.108846 ↗
88. Marimuthu S, Clark D, Allen J et al (2012) Finite element modelling of substrate thermal distortion in direct laser additive manufacture of an aero-engine component. Proc Inst Mech Eng Part C J Mech Eng Sci 227(9):1987–1999. https://doi.org/10.1177/095440621247036310.1177/0954406212470363 ↗
89. Ghnatios C, Rai K, Hascoet N et al (2021) Reduced order modeling of selective laser melting: from calibration to parametric part distortion. Int J Mater Form 14:973–986. https://doi.org/10.1007/s12289-021-01613-z10.1007/s12289-021-01613-z ↗
90. Dunbar AJ, Denlinger ER, Gouge MF et al (2017) Comparisons of laser powder bed fusion additive manufacturing builds through experimental in situ distortion and temperature measurements. Addit Manuf 15:57–65. https://doi.org/10.1016/j.addma.2017.03.003.10.1016/j.addma.2017.03.003 ↗
91. Denlinger ER, Gouge M, Irwin J et al (2017) Thermomechanical model development and in situ experimental validation of the laser powder-bed fusion process. Addit Manuf 16:73–80. https://doi.org/10.1016/j.addma.2017.05.001.10.1016/j.addma.2017.05.001 ↗
92. Denlinger ER, Heigel JC, Michaleris P et al (2015) Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys. J Mater Process Technol 215:123–131. https://doi.org/10.1016/j.jmatprotec.2014.07.030.10.1016/j.jmatprotec.2014.07.030 ↗
93. Denlinger ER, Heigel JC, Michaleris P (2015) Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al 4V. Proc Inst Mech Eng Part B J Eng Manuf 229(10):1803–1813. https://doi.org/10.1177/0954405414539494.10.1177/0954405414539494 ↗
94. Biegler M, Graf B, Rethmeier M (2018) In-situ distortions in LMD additive manufacturing walls can be measured with digital image correlation and predicted using numerical simulations. Addit Manuf 20:101–110. https://doi.org/10.1016/j.addma.2017.12.00710.1016/j.addma.2017.12.007 ↗
95. ANSYS Inc (2023) ANSYS Additive user guidance 2023R2
96. Inc ANSYS (2021) Ansys additive suite. Technical Report, Canonsburg, Pennsylvania, United States
97. Yang Y, Allen M, London T, Oancea V (2019) Residual strain predictions for a powder bed fusion inconel 625 single cantilever part. Integrat Mater Manuf Innovat 8(3):294–304. https://doi.org/10.1007/s40192-019-00144-510.1007/s40192-019-00144-5 ↗
98. Minetola P, Stiuso V, Calignano F, Galati M, Khandpur MS, Fontana L (2021) Experimental validation of laser powder bed fusion simulation. IOP Conf Ser : Mater Sci Eng 1091(1):012048. https://doi.org/10.1088/1757-899x/10.1088/1757-899x/1091/1/012048 ↗
99. Alvarez P, Ecenarro J, Setien I, Sebastian MS, Echeverria A, L (2016) Eciolaza, computationally efficient distortion prediction in powder bed fusion additive manufacturing. Int J Eng Res Sci 2(10):39–46
100. Gusarov AV, Pavlov M, Smurov I (2011) Residual stresses at laser surface remelting and additive manufacturing. Phys Proc 12:248–254. https://doi.org/10.1016/j.phpro.2011.03.032.10.1016/j.phpro.2011.03.032 ↗