Composite preforming defects: a review and a classification
Source abstract
Abstract
Advancing in the process of extending the use of composites for structural parts applications, it is inevitable to work on complex shapes. That is the main reason why understanding the complex forming mechanisms and the factors put into play during the process of composite materials is a major interest for both pre-impregnated forming and dry fabric preforming. Thus, the appearance of defects is a major concern and predicting their appearance for optimal product quality is the priority. A great number of authors showed that defects degrade the overall performance of the composite by creating local heterogeneities. Many factors can initiate these defects. This article is an assembly of the development of the literature on this subject. It is an attempt to provide a description for each defect and a classification order following the scale, the behavior mechanisms, the appearance plan. This will help to converge toward an identification of the defects manifesting during the composite forming.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Textile materials and evaluations · Material Properties and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Paul SK (2013) Theoretical analysis of strain- and stress-based forming limit diagrams. J Strain Anal Eng Des 48(3):177–188. https://doi.org/10.1177/030932471246852410.1177/0309324712468524 ↗
2. Harrison P, Gomes R, Curado-Correia N (2013) Press forming a 0/90 cross-ply advanced thermoplastic composite using the double-dome benchmark geometry. Compos Part A Appl Sci Manuf 54:56–69. https://doi.org/10.1016/j.compositesa.2013.06.01410.1016/j.compositesa.2013.06.014 ↗
3. Wang P, Hamila N, Boisse P (2013) Thermoforming simulation of multilayer composites with continuous fibres and thermoplastic matrix. Compos Part B Eng 52:127–136. https://doi.org/10.1016/j.compositesb.2013.03.04510.1016/j.compositesb.2013.03.045 ↗
4. Skordos AA, Monroy Aceves C, Sutcliffe MPF (2007) A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites. Compos Part A Appl Sci Manuf 38(5):1318–1330. https://doi.org/10.1016/j.compositesa.2006.11.00510.1016/j.compositesa.2006.11.005 ↗
5. Allaoui S, Cellard C, Hivet G (2015) Effect of inter-ply sliding on the quality of multilayer interlock dry fabric preforms. Compos Part A Appl Sci Manuf 68:336–345. https://doi.org/10.1016/j.compositesa.2014.10.01710.1016/j.compositesa.2014.10.017 ↗
6. Allaoui S, Boisse P, Chatel S, Hamila N, Hivet G, Soulat D, Vidal-Salle E (2011) Experimental and numerical analyses of textile reinforcement forming of a tetrahedral shape. Compos Part A Appl Sci Manuf 42(6):612–622. https://doi.org/10.1016/j.compositesa.2011.02.00110.1016/j.compositesa.2011.02.001 ↗
7. Lee JS, Hong SJ, Yu WR, Kang TJ (2007) The effect of blank holder force on the stamp forming behavior of non-crimp fabric with a chain stitch. Compos Sci Technol 67(3-4):357–366. https://doi.org/10.1016/j.compscitech.2006.09.00910.1016/j.compscitech.2006.09.009 ↗
8. Turk MA, Vermes B, Thompson AJ, Belnoue JPH, Hallett SR, Ivanov DS (2020) Mitigating forming defects by local modification of dry preforms mark. Compos Part A Appl Sci Manuf 128:105643. https://doi.org/10.1016/j.compositesa.2019.10564310.1016/j.compositesa.2019.105643 ↗
9. Nosrat Nezami F, Gereke T, Cherif C (2017) Active forming manipulation of composite reinforcements for the suppression of forming defects. Compos Part A Appl Sci Manuf 99:94–101. https://doi.org/10.1016/j.compositesa.2017.04.01110.1016/j.compositesa.2017.04.011 ↗
10. Molnár P, Ogale A, Lahr R, Mitschang P (2007) Influence of drapability by using stitching technology to reduce fabric deformation and shear during thermoforming. Compos Sci Technol 67(15-16):3386–3393. https://doi.org/10.1016/j.compscitech.2007.03.02210.1016/j.compscitech.2007.03.022 ↗
11. Hao S, Wang P, Legrand X et al (2019) Influence of the tufting pattern on the formability of tufted multi-layered preforms. Compos Struct 228:111356. https://doi.org/10.1016/j.compstruct.2019.11135610.1016/j.compstruct.2019.111356 ↗
12. Haorong LI, Gutowski T (1997) Chapter 11 the forming of thermoset composites. Compos Mater Ser 11:441–472. https://doi.org/10.1016/S0927-0108(97)80013-610.1016/S0927-0108(97)80013-6 ↗
13. Viisainen JV, Hosseini A, Sutcliffe MPF (2021) Experimental investigation, using 3D digital image correlation, into the effect of component geometry on the wrinkling behaviour and the wrinkling mechanisms of a biaxial NCF during preforming. Compos Part A Appl Sci Manuf 142:106248. https://doi.org/10.1016/j.compositesa.2020.10624810.1016/j.compositesa.2020.106248 ↗
14. El Said B, Green S, Hallett SR (2014) Kinematic modelling of 3D woven fabric deformation for structural scale features. Compos Part A Appl Sci Manuf 57:95–107. https://doi.org/10.1016/j.compositesa.2013.11.00610.1016/j.compositesa.2013.11.006 ↗
15. Tavana R, Najar SS, Abadi MT, Sedighi M (2013) Meso/macro-scale finite element model for forming process of woven fabric reinforcements. J Compos Mater 47(17):2075–2085. https://doi.org/10.1177/002199831245403410.1177/0021998312454034 ↗
16. Sherwood JA, Fetfatsidis KA, Gorczyca JL, Berger L (2012) Fabric thermostamping in polymer matrix composites. In: Fabric thermostamping in polymer matrix composites. Woodhead Publishing Limited10.1533/9780857096258.2.139 ↗
17. Dörr D, Joppich T, Schirmaier F, et al (2016) A Method for validation of finite element forming simulation on basis of a pointwise comparison of distance and curvature 170011:. https://doi.org/10.1063/1.496356710.1063/1.4963567 ↗
18. Dörr D, Brymerski W, Ropers S, Leutz D, Joppich T, Kärger L, Henning F (2017) A benchmark study of finite element codes for forming simulation of thermoplastic UD-Tapes. Procedia CIRP 66:101–106. https://doi.org/10.1016/j.procir.2017.03.22310.1016/j.procir.2017.03.223 ↗
19. Boisse P, Hamila N, Vidal-sallé E, Dumont F (2011) Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile , in-plane shear and bending stiffnesses. Compos Sci Technol 71(5):683–692. https://doi.org/10.1016/j.compscitech.2011.01.01110.1016/j.compscitech.2011.01.011 ↗
20. Hallett SR, Belnoue JPH, Nixon-Pearson OJ, et al (2016) Understanding and prediction of fibre waviness defect generation. Proc am Soc compos - 31st tech Conf ASC 2016
21. Khan MA, Mabrouki T, Vidal-Sallé E, Boisse P (2010) Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark. J Mater Process Technol 210(2):378–388. https://doi.org/10.1016/j.jmatprotec.2009.09.02710.1016/j.jmatprotec.2009.09.027 ↗
22. Bloom LD, Wang J, Potter KD (2013) Damage progression and defect sensitivity: an experimental study of representative wrinkles in tension. Compos Part B Eng 45(1):449–458. https://doi.org/10.1016/j.compositesb.2012.05.02110.1016/j.compositesb.2012.05.021 ↗
23. El-Hajjar RF, Petersen DR (2011) Gaussian function characterization of unnotched tension behavior in a carbon/epoxy composite containing localized fiber waviness. Compos Struct 93(9):2400–2408. https://doi.org/10.1016/j.compstruct.2011.03.02910.1016/j.compstruct.2011.03.029 ↗
24. Wang J, Potter KD, Hazra K, Wisnom MR (2012) Experimental fabrication and characterization of out-of-plane fiber waviness in continuous fiber-reinforced composites. J Compos Mater 46(17):2041–2053. https://doi.org/10.1177/002199831142987710.1177/0021998311429877 ↗
25. Mukhopadhyay S, Jones MI, Hallett SR (2015) Tensile failure of laminates containing an embedded wrinkle; numerical and experimental study. Compos Part A Appl Sci Manuf 77:219–228. https://doi.org/10.1016/j.compositesa.2015.07.00710.1016/j.compositesa.2015.07.007 ↗
26. Xu X, Jones MI, Ali H, Wisnom MR, Hallett SR (2020) Effect of out-of-plane wrinkles in curved multi-directional carbon/epoxy laminates. Compos Sci Technol 197:108282. https://doi.org/10.1016/j.compscitech.2020.10828210.1016/j.compscitech.2020.108282 ↗
27. Xie N, Smith RA, Mukhopadhyay S, Hallett SR (2018) A numerical study on the influence of composite wrinkle defect geometry on compressive strength. Mater Des 140:7–20. https://doi.org/10.1016/j.matdes.2017.11.03410.1016/j.matdes.2017.11.034 ↗
28. Mukhopadhyay S, Nixon-Pearson OJ, Hallett SR (2018) An experimental and numerical study on fatigue damage development in laminates containing embedded wrinkle defects. Int J Fatigue 107:1–12. https://doi.org/10.1016/j.ijfatigue.2017.10.00810.1016/j.ijfatigue.2017.10.008 ↗
29. Nikishkov Y, Makeev A, Seon G (2013) Progressive fatigue damage simulation method for composites. Int J Fatigue 48:266–279. https://doi.org/10.1016/j.ijfatigue.2012.11.00510.1016/j.ijfatigue.2012.11.005 ↗
30. Potter K, Khan B, Wisnom M, Bell T, Stevens J (2008) Variability, fibre waviness and misalignment in the determination of the properties of composite materials and structures. Compos Part A Appl Sci Manuf 39(9):1343–1354. https://doi.org/10.1016/j.compositesa.2008.04.01610.1016/j.compositesa.2008.04.016 ↗
31. Fedulov BN, Antonov FK, Safonov AA, Ushakov AE, Lomov SV (2015) Influence of fibre misalignment and voids on composite laminate strength. J Compos Mater 49(23):2887–2896. https://doi.org/10.1177/002199831455753310.1177/0021998314557533 ↗
32. Creech G, Pickett AK (2006) Meso-modelling of non-crimp fabric composites for coupled drape and failure analysis. J Mater Sci 41(20):6725–6736. https://doi.org/10.1007/s10853-006-0213-610.1007/s10853-006-0213-6 ↗
33. Tam AS, Gutowski TG (1990) The kinematics for forming ideal aligned fibre composites into complex shapes. Compos Manuf 1(4):219–228. https://doi.org/10.1016/0956-7143(90)90044-W10.1016/0956-7143(90)90044-W ↗
34. Christie GR, Collins IF, Bhattacharyya D (1995) Out-of-plane buckling of fiber-reinforced thermoplastic sheets under homogeneous biaxial conditions. J Appl Mech Trans ASME 62(4):834–840. https://doi.org/10.1115/1.289600810.1115/1.2896008 ↗
35. Pavan Kumar J, Uday Kumar R, Ramakrishna B et al (2018) Formability of sheet metals - a review. IOP Conf Ser Mater Sci Eng 455. https://doi.org/10.1088/1757-899X/455/1/01208110.1088/1757-899X/455/1/012081 ↗
36. Yu JZ, Cai Z, Ko FK (1994) Formability of textile preforms for composite applications. Part 1: characterization experiments. Compos Manuf 5(2):113–122. https://doi.org/10.1016/0956-7143(94)90062-010.1016/0956-7143(94)90062-0 ↗
37. Mohammed U, Lekakou C, Bader MG (2000) Experimental studies and analysis of the draping of woven fabrics. Compos Part A Appl Sci Manuf 31(12):1409–1420. https://doi.org/10.1016/S1359-835X(00)00080-410.1016/S1359-835X(00)00080-4 ↗
38. Boisse P, Gasser A, Hivet G (2001) Analysis of the mechanical behaviour : determination of the biaxial tensio-strain surfaces and their use in forming simulations. Exp Mech 32:260–269
39. Zouari B, Daniel J, Boisse P (2006) A woven reinforcement forming simulation method. Influence of the shear stiffness To cite this version : HAL Id : hal-00081069 A woven reinforcement forming simulation method. Influence of the shear stiffness10.1016/j.compstruc.2005.09.031 ↗
40. Komeili M, Milani AS (2016) On effect of shear-tension coupling in forming simulation of woven fabric reinforcements. Compos Part B Eng 99:17–29. https://doi.org/10.1016/j.compositesb.2016.05.00410.1016/j.compositesb.2016.05.004 ↗
41. Boisse P, Hamila N, Vidal-Sallé E, Dumont F (2011) Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses. Compos Sci Technol 71(5):683–692. https://doi.org/10.1016/j.compscitech.2011.01.01110.1016/j.compscitech.2011.01.011 ↗
42. de Bilbao E, Soulat D, Hivet G, Gasser A (2010) Experimental study of bending behaviour of reinforcements. Exp Mech 50(3):333–351. https://doi.org/10.1007/s11340-009-9234-910.1007/s11340-009-9234-9 ↗
43. Boisse P, Colmars J, Hamila N, Naouar N, Steer Q (2018) Bending and wrinkling of composite fiber preforms and prepregs. A review and new developments in the draping simulations. Compos Part B Eng 141:234–249. https://doi.org/10.1016/j.compositesb.2017.12.06110.1016/j.compositesb.2017.12.061 ↗
44. Dangora LM, Mitchell CJ, Sherwood JA (2015) Predictive model for the detection of out-of-plane defects formed during textile-composite manufacture. Compos Part A Appl Sci Manuf 78:102–112. https://doi.org/10.1016/j.compositesa.2015.07.01110.1016/j.compositesa.2015.07.011 ↗
45. Allaoui S, Hivet G, Soulat D, Wendling A, Ouagne P, Chatel S (2014) Experimental preforming of highly double curved shapes with a case corner using an interlock reinforcement. Int J Mater Form 7(2):155–165. https://doi.org/10.1007/s12289-012-1116-510.1007/s12289-012-1116-5 ↗
46. Long AC, Rudd CD (1994) A simulation of reinforcement deformation during the production of preforms for liquid moulding processes. Proc Inst Mech Eng Part B J Eng Manuf 208(4):269–278. https://doi.org/10.1243/PIME_PROC_1994_208_088_0210.1243/PIME_PROC_1994_208_088_02 ↗
47. Wang J, Paton R, Page JR (1999) Draping of woven fabric preforms and prepregs for production of polymer composite components. Compos Part A Appl Sci Manuf 30(6):757–765. https://doi.org/10.1016/S1359-835X(98)00187-010.1016/S1359-835X(98)00187-0 ↗
48. Böhler P, Härtel F, Middendorf P (2013) Identification of forming limits for unidirectional carbon textiles in reality and mesoscopic simulationy and mesoscopic simulation. Key Eng Mater 554–557:423–432. https://doi.org/10.4028/www.scientific.net/KEM.554-557.42310.4028/www.scientific.net/KEM.554-557.423 ↗
49. Middendorf P Process parameter studies and comparison of. 7577–7587
50. Alshahrani H, Hojjati M (2017) Experimental and numerical investigations on formability of out-of-autoclave thermoset prepreg using a double diaphragm process. Compos Part A Appl Sci Manuf 101:199–214. https://doi.org/10.1016/j.compositesa.2017.06.02110.1016/j.compositesa.2017.06.021 ↗
51. Chen S, McGregor OPL, Endruweit A et al (2017) Double diaphragm forming simulation for complex composite structures. Compos Part A Appl Sci Manuf 95:346–358. https://doi.org/10.1016/j.compositesa.2017.01.01710.1016/j.compositesa.2017.01.017 ↗
52. ÓBrádaigh CM, McGuinness GB, Pipes RB (1993) Numerical analysis of stresses and deformations in composite materials sheet forming: central indentation of a circular sheet. Compos Manuf 4(2):67–83. https://doi.org/10.1016/0956-7143(93)90074-I10.1016/0956-7143(93)90074-I ↗
53. Fetfatsidis KA, Jauffrès D, Sherwood JA, Chen J (2013) Characterization of the tool/fabric and fabric/fabric friction for woven-fabric composites during the thermostamping process. Int J Mater Form 6(2):209–221. https://doi.org/10.1007/s12289-011-1072-510.1007/s12289-011-1072-5 ↗
54. Harrison P, ten Thije R, Akkerman R, Long AC (2010) Characterisation and modelling friction at the tool-ply interface for thermoplastic woven composites. 1–210.1007/s12289-009-0638-y ↗
55. ten Thije RHW, Akkerman R, van der Meer L, Ubbink MP (2008) Tool-ply friction in thermoplastic composite forming. Int J Mater Form 1(S1):953–956. https://doi.org/10.1007/s12289-008-0215-910.1007/s12289-008-0215-9 ↗
56. Laroche D V-KT (1993) forming of woven fabric composites. 1825–1839
57. Hallander P, Akermo M, Mattei C, Petersson M, Nyman T (2013) An experimental study of mechanisms behind wrinkle development during forming of composite laminates. Compos Part A Appl Sci Manuf 50:54–64. https://doi.org/10.1016/j.compositesa.2013.03.01310.1016/j.compositesa.2013.03.013 ↗
58. Thor M, Sause MGR, Hinterhölzl RM (2020) Mechanisms of origin and classification of out-of-plane Fiber waviness in composite materials—a review. J Compos Sci 4(3):130. https://doi.org/10.3390/jcs403013010.3390/jcs4030130 ↗
59. Li L, Zhao Y, Zhao X, et al (2015) The effect of preforming quality on the permeability of non-crimp fabrics and the mechanical properties of their composites. ICCM Int Conf Compos Mater 2015-July:19–24
60. Bel S, Boisse P, Dumont F (2012) Analyses of the deformation mechanisms of non-crimp fabric composite reinforcements during preforming. Appl Compos Mater 19(3-4):513–528. https://doi.org/10.1007/s10443-011-9207-x10.1007/s10443-011-9207-x ↗
61. Bel S, Hamila N, Boisse P, Dumont F (2012) Finite element model for NCF composite reinforcement preforming: importance of inter-ply sliding. Compos Part A Appl Sci Manuf 43(12):2269–2277. https://doi.org/10.1016/j.compositesa.2012.08.00510.1016/j.compositesa.2012.08.005 ↗
62. Daniel J-L, Soulat D, Dumont F, Zouari B, Boisse P, Long AC (2003) Forming of a very unbalanced fabric experiment and simulation. Int J Form Process 6(3-4):465–480. https://doi.org/10.3166/ijfp.6.465-48010.3166/ijfp.6.465-480 ↗
63. Gatouillat S, Bareggi A, Vidal-Sallé E, Boisse P (2013) Meso modelling for composite preform shaping - simulation of the loss of cohesion of the woven fibre network. Compos Part A Appl Sci Manuf 54:135–144. https://doi.org/10.1016/j.compositesa.2013.07.01010.1016/j.compositesa.2013.07.010 ↗
64. Boisse P, Hamila N, Madeo A (2016) Modelling the development of defects during composite reinforcements and prepreg forming. Philos Trans R Soc A Math Phys Eng Sci 374(2071). https://doi.org/10.1098/rsta.2015.026910.1098/rsta.2015.0269 ↗
65. Tephany C, Gillibert J, Ouagne P, Hivet G, Allaoui S, Soulat D (2016) Development of an experimental bench to reproduce the tow buckling defect appearing during the complex shape forming of structural flax based woven composite reinforcements. Compos Part A Appl Sci Manuf 81:22–33. https://doi.org/10.1016/j.compositesa.2015.10.01110.1016/j.compositesa.2015.10.011 ↗
66. Tam AS, Gutowski TG (1989) Ply-slip during the forming of thermoplastic composite parts. J Compos Mater 23(6):587–605. https://doi.org/10.1177/00219983890230060410.1177/002199838902300604 ↗
67. Dodwell TJ, Butler R, Hunt GW (2014) Out-of-plane ply wrinkling defects during consolidation over an external radius. Compos Sci Technol 105:151–159. https://doi.org/10.1016/j.compscitech.2014.10.00710.1016/j.compscitech.2014.10.007 ↗
68. Belnoue JPH, Nixon-Pearson OJ, Thompson AJ, Ivanov DS, Potter KD, Hallett SR (2018) Consolidation-driven defect generation in thick composite parts. J Manuf Sci Eng Trans ASME 140(7). https://doi.org/10.1115/1.403955510.1115/1.4039555 ↗
69. Rashidi A, Belnoue JPH, Thompson AJ, Hallett SR, Milani AS (2021) Consolidation-driven wrinkling in carbon/epoxy woven fabric prepregs: an experimental and numerical study. Compos Part A Appl Sci Manuf 143:106298. https://doi.org/10.1016/j.compositesa.2021.10629810.1016/j.compositesa.2021.106298 ↗
70. Cattanach JB, Guff G, Cogswell FN The processing of thermoplastics containing high. 345–362
71. Jerpdal L, Åkermo M, Ståhlberg D, Herzig A (2018) Process induced shape distortions of self-reinforced poly (ethylene terephthalate) composites. Compos Struct 193:29–34. https://doi.org/10.1016/j.compstruct.2018.03.03810.1016/j.compstruct.2018.03.038 ↗
72. Hubert P, Poursartip A (2001) Aspects of the compaction of composite angle laminates: an experimental investigation. J Compos Mater 35(1):2–26. https://doi.org/10.1106/X8D7-PR9V-U6F2-0JEK10.1106/X8D7-PR9V-U6F2-0JEK ↗
73. Levy A, Hubert P (2019) Vacuum-bagged composite laminate forming processes: predicting thickness deviation in complex shapes. Compos Part A Appl Sci Manuf 126:105568. https://doi.org/10.1016/j.compositesa.2019.10556810.1016/j.compositesa.2019.105568 ↗
74. Netzel C, Mordasini A, Schubert J, Allen T, Battley M, Hickey CMD, Hubert P, Bickerton S (2021) An experimental study of defect evolution in corners by autoclave processing of prepreg material. Compos Part A Appl Sci Manuf 144:106348. https://doi.org/10.1016/j.compositesa.2021.10634810.1016/j.compositesa.2021.106348 ↗
75. Hallander P, Sjölander J, Petersson M, Åkermo M (2016) Interface manipulation towards wrinkle-free forming of stacked UD prepreg layers. Compos Part A Appl Sci Manuf 90:340–348. https://doi.org/10.1016/j.compositesa.2016.07.01310.1016/j.compositesa.2016.07.013 ↗
76. Bickerton S, Sozer EM, Graham PJ, Advani SG (2000) Fabric structure and mold curvature effects on preform permeability and mold filling in the RTM process. Part I. experiments. Compos Part A Appl Sci Manuf 31(5):423–438. https://doi.org/10.1016/S1359-835X(99)00087-110.1016/S1359-835X(99)00087-1 ↗
77. Pierce RS, Falzon BG, Thompson MC (2017) A multi-physics process model for simulating the manufacture of resin-infused composite aerostructures. Compos Sci Technol 149:269–279. https://doi.org/10.1016/j.compscitech.2017.07.00310.1016/j.compscitech.2017.07.003 ↗
78. Hallander P, Sjölander J, Åkermo M (2015) Composites : Part A Forming induced wrinkling of composite laminates with mixed ply material properties ; an experimental study. Compos Part A 78:234–245. https://doi.org/10.1016/j.compositesa.2015.08.02510.1016/j.compositesa.2015.08.025 ↗
79. Thije RHW, Loendersloot R, Akkerman R (2005) Drape simulation of non-crimp fabrics. 8–11
80. De Luca P, Lefébure P, Pickett AK (1998) Numerical and experimental investigation of some press forming parameters of two fibre reinforced thermoplastics: APC2-AS4 and PEI-CETEX. Compos Part A Appl Sci Manuf 29(1-2):101–110. https://doi.org/10.1016/S1359-835X(97)00060-210.1016/S1359-835X(97)00060-2 ↗
81. ten Thije RHW, Akkerman R (2009) A multi-layer triangular membrane finite element for the forming simulation of laminated composites. Compos Part A Appl Sci Manuf 40(6-7):739–753. https://doi.org/10.1016/j.compositesa.2009.03.00410.1016/j.compositesa.2009.03.004 ↗
82. Boisse P, Huang J, Guzman-Maldonado E (2021) Analysis and modeling of wrinkling in composite forming. J Compos Sci 5(3):1–16. https://doi.org/10.3390/jcs503008110.3390/jcs5030081 ↗
83. Huang J, Boisse P, Hamila N, Zhu Y (2020) Simulation of wrinkling during bending of composite reinforcement laminates. Materials (Basel) 13(10). https://doi.org/10.3390/ma1310237410.3390/ma13102374 ↗
84. Wang P, Hamila N, Pineau P, Boisse P (2014) Thermomechanical analysis of thermoplastic composite prepregs using bias-extension test. J Thermoplast Compos Mater 27(5):679–698. https://doi.org/10.1177/089270571245428910.1177/0892705712454289 ↗
85. Allaoui S, Hivet G, Cellard C (2015) Inter-ply friction effect on the forming result of multi-layered composite. Key Eng Mater 651–653:381–386. https://doi.org/10.4028/www.scientific.net/KEM.651-653.38110.4028/www.scientific.net/KEM.651-653.381 ↗
86. Thompson AJ, Belnoue JPH, Hallett SR (2020) Modelling defect formation in textiles during the double diaphragm forming process. Compos Part B Eng 202:108357. https://doi.org/10.1016/j.compositesb.2020.10835710.1016/j.compositesb.2020.108357 ↗
87. Shanwan A, Allaoui S (2019) Different experimental ways to minimize the preforming defects of multi-layered interlock dry fabric. Int J Mater Form 12(1):69–78. https://doi.org/10.1007/s12289-018-1407-610.1007/s12289-018-1407-6 ↗
88. Liu LS, Zhang T, Wang P, Legrand X, Soulat D (2015) Influence of the tufting yarns on formability of tufted 3-dimensional composite reinforcement. Compos Part A Appl Sci Manuf 78:403–411. https://doi.org/10.1016/j.compositesa.2015.07.01410.1016/j.compositesa.2015.07.014 ↗
89. Shen H, Wang P, Legrand X, Liu L (2019) Characterisation and optimisation of wrinkling during the forming of tufted three-dimensional composite preforms. Compos Part A Appl Sci Manuf 127:105651. https://doi.org/10.1016/j.compositesa.2019.10565110.1016/j.compositesa.2019.105651 ↗
90. Ó Brádaigh CM, McGuinness GB, McEntee SP (1997) Chapter 7 implicit finite element modelling of composites sheet forming processes. Compos Mater Ser 11:247–322. https://doi.org/10.1016/S0927-0108(97)80009-410.1016/S0927-0108(97)80009-4 ↗
91. Bickerton S, Šimáček P, Guglielmi SE, Advani SG (1997) Investigation of draping and its effects on the mold filling process during manufacturing of a compound curved composite part. Compos Part A Appl Sci Manuf 28(9-10):801–816. https://doi.org/10.1016/S1359-835X(97)00033-X10.1016/S1359-835X(97)00033-X ↗
92. Koziey BL, Ghafur MO, Vlachopoulos J, Mirza FA (1997) Chapter 3 computer simulation of thermoforming. Compos Mater Ser 11:75–89. https://doi.org/10.1016/S0927-0108(97)80005-710.1016/S0927-0108(97)80005-7 ↗
93. Nosrat Nezami F, Gereke T, Cherif C (2016) Analyses of interaction mechanisms during forming of multilayer carbon woven fabrics for composite applications. Compos Part A Appl Sci Manuf 84:406–416. https://doi.org/10.1016/j.compositesa.2016.02.02310.1016/j.compositesa.2016.02.023 ↗
94. Gorczyca-Cole JL, Sherwood JA, Chen J (2007) A friction model for thermostamping commingled glass-polypropylene woven fabrics. Compos Part A Appl Sci Manuf 38(2):393–406. https://doi.org/10.1016/j.compositesa.2006.03.00610.1016/j.compositesa.2006.03.006 ↗
95. (2012) Influence of the dry woven fabrics meso-structure on fabric / fabric contact behavior. https://doi.org/10.1177/002199831142462710.1177/0021998311424627 ↗
96. Allaoui S, Hivet G, Billoët JL (2009) Experimental analysis of the contact between layers of dry fabrics. Int J Mater Form 2(S1):209–212. https://doi.org/10.1007/s12289-009-0555-010.1007/s12289-009-0555-0 ↗
97. Hivet G, Allaoui S, Cam BT, Ouagne P, Soulat D (2012) Design and potentiality of an apparatus for measuring yarn/yarn and fabric/fabric friction. Exp Mech 52(8):1123–1136. https://doi.org/10.1007/s11340-011-9566-010.1007/s11340-011-9566-0 ↗
98. Allaoui S (2007) Integrated tool for simulation of textile composites
99. Kacimi B, Djebbar A, Allaoui S (2019) Effect of reinforcement shear and mesoscopic defects on the low velocity impact behavior of a GFRP10.1007/s12289-019-01521-3 ↗
100. Shanwan A, Cruanes C, Allaoui S, et al (2020) GFRP mechanical behaviour induced by a mesoscopic shaping defect to cite this version : HAL id : HAL-02481013